Download or read book Near Threshold Computing written by Michael Hübner and published by Springer. This book was released on 2015-11-14 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores near-threshold computing (NTC), a design-space using techniques to run digital chips (processors) near the lowest possible voltage. Readers will be enabled with specific techniques to design chips that are extremely robust; tolerating variability and resilient against errors. Variability-aware voltage and frequency allocation schemes will be presented that will provide performance guarantees, when moving toward near-threshold manycore chips. · Provides an introduction to near-threshold computing, enabling reader with a variety of tools to face the challenges of the power/utilization wall; · Demonstrates how to design efficient voltage regulation, so that each region of the chip can operate at the most efficient voltage and frequency point; · Investigates how performance guarantees can be ensured when moving towards NTC manycores through variability-aware voltage and frequency allocation schemes.

Download or read book Circuits and Systems Advances in Near Threshold Computing written by Sanghamitra Roy and published by MDPI. This book was released on 2021-05-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing.

Download or read book Circuits and Systems Advances in Near Threshold Computing written by Sanghamitra Roy and published by . This book was released on 2021 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing.

Download or read book Advanced Computer Architecture written by Chao Li and published by Springer. This book was released on 2018-09-12 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th Annual Conference on Advanced Computer Architecture, ACA 2018, held in Yingkou, China, in August 2018. The 17 revised full papers presented were carefully reviewed and selected from 80 submissions. The papers of this volume are organized in topical sections on: accelerators; new design explorations; towards efficient ML/AI; parallel computing system.

Download or read book Design of Energy efficient Processing Elements for Near threshold Parallel Computing written by Michael Andreas Gautschi and published by . This book was released on 2017 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Power Circuits for Emerging Applications in Communications Computing and Sensing written by Fei Yuan and published by CRC Press. This book was released on 2018-12-07 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the need to investigate new approaches to lower energy requirement in multiple application areas and serves as a guide into emerging circuit technologies. It explores revolutionary device concepts, sensors, and associated circuits and architectures that will greatly extend the practical engineering limits of energy-efficient computation. The book responds to the need to develop disruptive new system architecutres, circuit microarchitectures, and attendant device and interconnect technology aimed at achieving the highest level of computational energy efficiency for general purpose computing systems. Features Discusses unique technologies and material only available in specialized journal and conferences Covers emerging applications areas, such as ultra low power communications, emerging bio-electronics, and operation in extreme environments Explores broad circuit operation, ex. analog, RF, memory, and digital circuits Contains practical applications in the engineering field, as well as graduate studies Written by international experts from both academia and industry

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Cristina Silvano and published by Springer Nature. This book was released on 2023-12-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 22st International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2021, which took place in July 2022 in Samos, Greece. The 11 full papers and 7 short papers presented in this volume were carefully reviewed and selected from 45 submissions. The conference covers a wide range of embedded systems design aspects, including machine learning accelerators, and power management and programmable dataflow systems.

Download or read book Advanced Electrical and Electronics Engineering written by Jian Lee and published by Springer Science & Business Media. This book was released on 2011-04-13 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2010 First International Conference on Electrical and Electronics Engineering was held in Wuhan, China December 4-5. Advanced Electrical and Electronics Engineering book contains 72 revised and extended research articles written by prominent researchers participating in the conference. Topics covered include, Power Engineering, Telecommunication, Control engineering, Signal processing, Integrated circuit, Electronic amplifier, Nano-technologies, Circuits and networks, Microelectronics, Analog circuits, Digital circuits, Nonlinear circuits, Mixed-mode circuits, Circuits design, Sensors, CAD tools, DNA computing, Superconductivity circuits. Electrical and Electronics Engineering will offer the state of art of tremendous advances in Electrical and Electronics Engineering and also serve as an excellent reference work for researchers and graduate students working with/on Electrical and Electronics Engineering.

Download or read book Proceedings of International Conference on Recent Trends in Computing written by Rajendra Prasad Mahapatra and published by Springer Nature. This book was released on 2023-03-20 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of high-quality peer-reviewed research papers presented at International Conference on Recent Trends in Computing (ICRTC 2022) held at SRM Institute of Science and Technology, Ghaziabad, Delhi, India, during 3 – 4 June 2022. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. The book presents original works from researchers from academic and industry in the field of networking, security, big data and the Internet of things.

Download or read book Modeling and Optimization of Parallel and Distributed Embedded Systems written by Arslan Munir and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art in research in parallel and distributed embedded systems, which have been enabled by developments in silicon technology, micro-electro-mechanical systems (MEMS), wireless communications, computer networking, and digital electronics. These systems have diverse applications in domains including military and defense, medical, automotive, and unmanned autonomous vehicles. The emphasis of the book is on the modeling and optimization of emerging parallel and distributed embedded systems in relation to the three key design metrics of performance, power and dependability. Key features: Includes an embedded wireless sensor networks case study to help illustrate the modeling and optimization of distributed embedded systems. Provides an analysis of multi-core/many-core based embedded systems to explain the modeling and optimization of parallel embedded systems. Features an application metrics estimation model; Markov modeling for fault tolerance and analysis; and queueing theoretic modeling for performance evaluation. Discusses optimization approaches for distributed wireless sensor networks; high-performance and energy-efficient techniques at the architecture, middleware and software levels for parallel multicore-based embedded systems; and dynamic optimization methodologies. Highlights research challenges and future research directions. The book is primarily aimed at researchers in embedded systems; however, it will also serve as an invaluable reference to senior undergraduate and graduate students with an interest in embedded systems research.

Download or read book Computing and Software Science written by Bernhard Steffen and published by Springer Nature. This book was released on 2019-10-04 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers of this volume focus on the foundational aspects of computer science, the thematic origin and stronghold of LNCS, under the title “Computing and Software Science: State of the Art and Perspectives”. They are organized in two parts: The first part, Computation and Complexity, presents a collection of expository papers on fashionable themes in algorithmics, optimization, and complexity. The second part, Methods, Languages and Tools for Future System Development, aims at sketching the methodological evolution that helps guaranteeing that future systems meet their increasingly critical requirements. Chapter 3 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Handbook of Energy Aware and Green Computing Two Volume Set written by Ishfaq Ahmad and published by CRC Press. This book was released on 2016-02-03 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implementing energy-efficient CPUs and peripherals as well as reducing resource consumption have become emerging trends in computing. As computers increase in speed and power, their energy issues become more and more prevalent. The need to develop and promote environmentally friendly computer technologies and systems has also come to the forefront

Download or read book Mathematical Foundations of Computer Science 2015 written by Giuseppe F. Italiano and published by Springer. This book was released on 2015-08-10 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNCS 9234 and 9235 constitutes the refereed conference proceedings of the 40th International Symposium on Mathematical Foundations of Computer Science, MFCS 2015, held in Milan, Italy, in August 2015. The 82 revised full papers presented together with 5 invited talks were carefully selected from 201 submissions. The papers feature high-quality research in all branches of theoretical computer science. They have been organized in the following topical main sections: logic, semantics, automata, and theory of programming (volume 1) and algorithms, complexity, and games (volume 2).

Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.

Download or read book Multi Processor System on Chip 1 written by Liliana Andrade and published by John Wiley & Sons. This book was released on 2021-03-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Multi-Processor System-on-Chip (MPSoC) is the key component for complex applications. These applications put huge pressure on memory, communication devices and computing units. This book, presented in two volumes – Architectures and Applications – therefore celebrates the 20th anniversary of MPSoC, an interdisciplinary forum that focuses on multi-core and multi-processor hardware and software systems. It is this interdisciplinarity which has led to MPSoC bringing together experts in these fields from around the world, over the last two decades. Multi-Processor System-on-Chip 1 covers the key components of MPSoC: processors, memory, interconnect and interfaces. It describes advance features of these components and technologies to build efficient MPSoC architectures. All the main components are detailed: use of memory and their technology, communication support and consistency, and specific processor architectures for general purposes or for dedicated applications.

Download or read book The Dark Side of Silicon written by Amir M. Rahmani and published by Springer. This book was released on 2016-12-31 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the art of one of the main concerns with microprocessors today, a phenomenon known as "dark silicon". Readers will learn how power constraints (both leakage and dynamic power) limit the extent to which large portions of a chip can be powered up at a given time, i.e. how much actual performance and functionality the microprocessor can provide. The authors describe their research toward the future of microprocessor development in the dark silicon era, covering a variety of important aspects of dark silicon-aware architectures including design, management, reliability, and test. Readers will benefit from specific recommendations for mitigating the dark silicon phenomenon, including energy-efficient, dedicated solutions and technologies to maximize the utilization and reliability of microprocessors.

Download or read book Computer Communication Networking and Internet Security written by Suresh Chandra Satapathy and published by Springer. This book was released on 2017-05-02 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.