Download or read book Introduction to Nanophotonics written by Sergey V. Gaponenko and published by Cambridge University Press. This book was released on 2010-04-08 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics is where photonics merges with nanoscience and nanotechnology, and where spatial confinement considerably modifies light propagation and light-matter interaction. Describing the basic phenomena, principles, experimental advances and potential impact of nanophotonics, this graduate-level textbook is ideal for students in physics, optical and electronic engineering and materials science. The textbook highlights practical issues, material properties and device feasibility, and includes the basic optical properties of metals, semiconductors and dielectrics. Mathematics is kept to a minimum and theoretical issues are reduced to a conceptual level. Each chapter ends in problems so readers can monitor their understanding of the material presented. The introductory quantum theory of solids and size effects in semiconductors are considered to give a parallel discussion of wave optics and wave mechanics of nanostructures. The physical and historical interplay of wave optics and quantum mechanics is traced. Nanoplasmonics, an essential part of modern photonics, is also included.

Download or read book Fundamentals and Applications of Nanophotonics written by Joseph W. Haus and published by Woodhead Publishing. This book was released on 2016-01-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Nanophotonics includes a comprehensive discussion of the field of nanophotonics, including key enabling technologies that have the potential to drive economic growth and impact numerous application domains such as ICT, the environment, healthcare, military, transport, manufacturing, and energy. This book gives readers the theoretical underpinnings needed to understand the latest advances in the field. After an introduction to the area, chapters two and three cover the essential topics of electrodynamics, quantum mechanics, and computation as they relate to nanophotonics. Subsequent chapters explore materials for nanophotonics, including nanoparticles, photonic crystals, nanosilicon, nanocarbon, III-V, and II-VI semiconductors. In addition, fabrication and characterization techniques are addressed, along with the importance of plasmonics, and the applications of nanophotonics in devices such as lasers, LEDs, and photodetectors. - Covers electrodynamics, quantum mechanics and computation as these relate to nanophotonics - Reviews materials, fabrication and characterization techniques for nanophotonics - Describes applications of the technology such as lasers, LEDs and photodetectors

Download or read book Micro and Nano Fabrication written by Hans H. Gatzen and published by Springer. This book was released on 2015-01-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.

Download or read book Nanofabrication written by Christo Papadopoulos and published by Springer. This book was released on 2016-07-30 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the techniques and tools of nanostructure fabrication from state-of-the-art lithography to emerging self-assembly approaches. Top-down and bottom-up methodologies along with hybrid approaches are used to illustrate the fabrication of structures including integrated circuits, semiconductor quantum dots, metallic nanoparticles, carbon nanotubes, molecular structures, nanocomposites, arrays and superstructures. Nanofabrication applications in nanoelectronics, biotechnology, nanomechanical devices and nanophotonics will be examined. This brief will present the core concepts of nanofabrication relevant to researchers and industry in this important and rapidly evolving area.

Download or read book Nanotechnology for Microelectronics and Photonics written by Raúl José Martín-Palma and published by Elsevier. This book was released on 2017-06-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology for Microelectronics and Photonics, Second Edition has been thoroughly revised, expanded, and updated. The aim of the book is to present the most recent advances in the field of nanomaterials, as well as the devices being developed for novel nanoelectronics and nanophotonic systems. It covers the many novel nanoscale applications in microelectronics and photonics that have been developed in recent years. Looking to the future, the book suggests what other applications are currently in development and may become feasible within the next few decades based on novel materials such as graphene, nanotubes, and organic semiconductors. In addition, the inclusion of new chapters and new sections to keep up with the latest developments in this rapidly-evolving field makes Nanotechnology for Microelectronics and Photonics, Second Edition an invaluable reference to research and industrial scientists looking for a guide on how nanostructured materials and nanoscale devices are used in microelectronics, optoelectronics, and photonics today and in future developments. - Presents the fundamental scientific principles that explain the novel properties and applications of nanostructured materials in the quantum frontier - Offers clear and concise coverage of how nanotechnology is currently used in the areas of microelectronics, optoelectronics, and photonics, as well as future proposed devices - Includes nearly a hundred problems along with helpful hints and full solutions for more than half of them

Download or read book Nanophotonic Fabrication written by Takashi Yatsui and published by Springer Science & Business Media. This book was released on 2012-04-12 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics, a novel optical technology, utilizes the local interaction between nanometric particles via optical near fields. The optical near fields are the elementary surface excitations on nanometric particles, i.e. dressed photons that carry material energy. Of the variety of qualitative innovations in optical technology realized by nanophotonics, this books focuses on fabrication. To fabricate nano-scale photonic devices with nanometer-scale controllability in size and position, we developed a self-assembly method for size- and position-controlled ultra-long nanodot chains using a novel effect of near-field optical desorption. A novel deposition and etching scheme under nonresonant conditions is also demonstrated and its origin is reviewed.

Download or read book Nanofabrication written by Andrew Sarangan and published by CRC Press. This book was released on 2016-10-26 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to introduce typical cleanroom processes, techniques, and their fundamental principles. It is written for the practicing scientist or engineer, with a focus on being able to transition the information from the book to the laboratory. Basic theory such as electromagnetics and electrochemistry is described in as much depth as necessary to understand and explain the current practice and their limitations. Examples from various areas of interest will be covered, such as the fabrication of photonic devices including photo detectors, waveguides, and optical coatings, which are not commonly found in other fabrication texts.

Download or read book Surface Plasmon Nanophotonics written by Mark L. Brongersma and published by Springer. This book was released on 2007-09-18 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a new class of photonic devices, known as surface plasmon nanophotonic structures. The book highlights several exciting new discoveries, while providing a clear discussion of the underlying physics, the nanofabrication issues, and the materials considerations involved in designing plasmonic devices with new functionality. Chapters written by the leaders in the field of plasmonics provide a solid background to each topic.

Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and academic institutions around the world define subfields, offer practical instructions and examples, and pave the way for future research. Helping readers to select the proper fabricating technique for their experiments, the book provides a broad vision of the most critical problems and explains how to solve them. It includes basic definitions and introduces the main underlying concepts of nanofabrication. The book also discusses the major advantages and disadvantages of each approach and offers a wide variety of examples of cutting-edge applications. Each chapter focuses on a particular method or aspect of study. For every method, the contributors describe the underlying theoretical basis, resolution, patterns and substrates used, and applications. They show how applications at the nanoscale require a different process and understanding than those at the microscale. For each experiment, they elucidate key solutions to problems relating to materials, methods, and surface considerations. A complete resource for this rapidly emerging interdisciplinary field, this handbook provides practical information for planning the experiments of any project that employs nanofabrication techniques. It gives readers a foundation to enter the complex world of nanofabrication and inspires the scientific community at large to push the limits of nanometer resolution.

Download or read book Off Shell Applications in Nanophotonics written by Motoichi Ohtsu and published by Elsevier. This book was released on 2021-07-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Off-shell science deals with the quantum field in which the dispersion relation between energy and momentum is invalid. A typical example of such the quantum field is the dressed photon (DP) that creates by the interaction among photons, electrons, and phonons in a nano-particle. This field is complementary to the on-shell quantum field (photons in a macroscopic space). Off-Shell Applications in Nanophotonics: Dressed Photon Science and Technology reviews the experimental/theoretical studies and shows the route that should be taken to establish off-shell science in the future. A variety of phenomena originate from the DP, and phenomena analogous to them have been found among physical, chemical, and biological phenomena. This indicates that off-shell quantum fields are universal and essential constituent elements of nature. By noting this, readers will be able to use off-shell science to develop new technologies. This book presents i) the reasons why the off-shell scientific theory is required, ii) the nature of the dressed photon by presenting experimental results, iii) tentative theoretical description of the dressed photon, iv) disruptive innovations (nano-optical devices, nano-fabrication technology, energy conversion technology, and silicon light-emitting diodes/lasers), and v) genuine theoretical approaches (based on spatio-temporal vortex hydrodynamics, quantum probability, quantum measurement, and micro-macro duality). It will appeal to materials scientists, engineers and physicists working in the areas of optics and photonics. - Explains the fundamental concepts behind off-shell science, and how it differs from traditional nanophotonics - Presents a range of simulation models demonstrating major off-shell models - Assesses the major challenges for researchers wanting to employ off-shell-based experimental techniques

Download or read book Nanophotonics Integrating Photochemistry Optics and Nano Bio Materials Studies written by Hiroshi Masuhara and published by Elsevier. This book was released on 2004-10-09 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics: Integrating Photochemistry, Optics and Nano/Bio Materials Studies.Is an interdisciplinary research text on the application of nanophotonic (physical/chemical) research and effects in devices for applications, bridging a gap between conventional pthotophysics/photochemistry and nanoscience. Nanophotonics is a new wide research field related to photochemistry, photobiology, and photophysics in nanodimension. Under the keywords of "Photo" and "Nano", advanced scientific topics, such as spectroscopic analysis of from single molecules to nanomaterials, nanofabrication by photons, detection of single bio-molecules, near field optics, and so forth, are described here. The book is written by experts in the field of photochemistry, optics, material science, bioscience, and so on for providing advanced knowledge of nanophotonics. Nanophotonics is a new research field that is not included in any conventional discipline but widely cover evolving and promising research subjects under the keywords of "Light" and "Nanoscale". Topics included in the book are concerned with photodynamics: from single molecules to nanoparticles, spectroscopy and imaging in nanodimensions, nanofabrication, synthesis, analysis and control of nano/bio systems and so on, the book is finalized by topics of toward molecular nanophotonics. This is written primarily for graduate students, researchers, and engineers.

Download or read book Principles of Nanophotonics written by Motoichi Ohtsu and published by CRC Press. This book was released on 2008-06-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coauthored by the developer of nanophotonics,this book outlines physically intuitive concepts of the subject using a novel theoretical framework that differs from conventional wave optics. After reviewing the background, history, and current status of research and development in nanophotonics and related technologies, the authors present a unique theoretical model to describe the interactions among nanometric material systems via optical near-fields. They then explore nanophotonic devices and fabrication techniques and provide examples of qualitative innovation. The final chapter looks at how the assembly of nanophotonic devices produces a nanophotonic system.

Download or read book Progress in Nanophotonics 1 written by Motoichi Ohtsu and published by Springer Science & Business Media. This book was released on 2011-07-29 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the recent progress in nanophotonics technology to be used to develop novel nano-optical devices, fabrication technology, and security systems. It begins with a review of the concept of dressed photons and applications to devices, fabrication, and systems; principles and applications. Further topics include: DNA process for quantum dot chain, photon enhanced emission microscopy, near field spectroscopy of metallic nanostructure, self-organized fabrication of composite semiconductor quantum dots, formation of metallic nanostructure, and nanophotonic information systems with security. These topics are reviewed by seven leading scientists. This overview is a variable resource for engineers and scientists working in the field of nanophotonics.

Download or read book Integrated Nanophotonic Devices written by Zeev Zalevsky and published by William Andrew. This book was released on 2010-10-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics is a field of science and technology based on the manipulation of light with equally miniscule structures, in the same way that computer chips are used to route and switch electrical signals. By enabling new high bandwidth, high speed optoelectronic components, nanophotonics has the potential to revolutionize the fields of telecommunications, computation and sensing. In this book, Zalevsky and Abdulhalim explore one of the key technologies emerging within nanophotonics, that of nano-integrated photonic modulation devices and sensors. The attempt to integrate photonic dynamic devices with microelectronic circuits is becoming a major scientific as well as industrial trend due to the fact that currently processing is mainly achieved using microelectronic chips but transmission, especially for long distances, takes place via optical links. - Unlocks the technologies that will turn the rapidly growing research area of nanophotonics into a major area of commercial development, with applications in telecommunications, computing, security and sensing - Nano-integrated photonic modulation devices and sensors are the components that will see nanophotonics moving out of the lab into a new generation of products and services - By covering the scientific fundamentals alongside technological applications, the authors open up this important multidisciplinary subject to readers from a range of scientific backgrounds

Download or read book Nanoscale Photonics and Optoelectronics written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intersection of nanostructured materials with photonics and electronics shows great potential for clinical diagnostics, sensors, ultrafast telecommunication devices, and a new generation of compact and fast computers. Nanophotonics draws upon cross-disciplinary expertise from physics, materials science, chemistry, electrical engineering, biology, and medicine to create novel technologies to meet a variety of challenges. This is the first book to focus on novel materials and techniques relevant to the burgeoning area of nanoscale photonics and optoelectronics, including novel-hybrid materials with multifunctional capabilities and recent advancements in the understanding of optical interactions in nanoscale materials and quantum-confined objects. Leading experts provide a fundamental understanding of photonics and the related science and technology of plasmonics, polaritons, quantum dots for nanophotonics, nanoscale field emitters, near-field optics, nanophotonic architecture, and nanobiophotonic materials.

Download or read book Nanofabrication Techniques written by and published by BoD – Books on Demand. This book was released on 2023-12-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication is the process of assembling structures at the nanoscale with unique properties. This book describes proficient, low-cost, and robust nanofabrication techniques to produce nanostructures. It presents information on nanofabrication technology principles, methodologies, equipment, and processes, as well as discusses the fabrication of new structures for new applications. The nanofabrication techniques reviewed are applicable to different engineering processes, nano-electromechanical systems, biosensors, nanomaterials, photonic crystals, devices, and new structures. This book is a useful resource for students and professionals, including engineers, scientists, researchers, technicians, and technology managers.

Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.