Download or read book Tunneling Under Squeezing Conditions written by Manuel De la Fuente Mata and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the excavation of deep tunnels, squeezing ground conditions are often encountered. The squeezing behavior of the ground is characterized by large time-dependent and usually anisotropic convergences that take place at the tunnel wall. The technique of excavation has a strong influence on the tunnel response when it is excavated under squeezing conditions. This phenomenon is illustrated throughout the case study of the Fréjus road tunnel excavated with conventional drill and blast methods and of its safety gallery excavated with a single shield tunneling boring machine. They exhibit a very interesting configuration of two tunnels excavated in parallel under the same geotechnical conditions but with different excavation techniques. Monitored geotechnical data from both tunnels are analyzed and compared. Numerical simulations of both tunnels have been carried out with Flac3D. An anisotropic creep model which includes weakness planes of given orientation embedded in a visco-elasto-plastic matrix has been used for describing the behavior of the ground. A back-analysis of convergence measurements of the Fréjus road tunnel has been carried out. The behavior of the ground identified from the Fréjus road tunnel is extrapolated to predict the response of the Fréjus safety gallery in terms of the stress state in the lining. The influence of the technique of excavation on the time-dependent parameters of the ground is taken into account in the computations and its effects are discussed. It is shown that the long term ground deformation are significantly reduced with TBM excavation as compared to traditional blast and drill method.Furthermore, the convergence-confinement methods are reviewed and their applicability is discussed when they are applied to full face circular tunnels excavated in rock masses with a stiff support system near the face. In this context, a set of empirical formula are proposed which allows to accurately predict the equilibrium state between the ground and the lining in circular tunnels excavated in full section. These formula are useful in the preliminary phase of tunnel design.
Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. Identify the most significant parameters influencing the behaviour of a rock mass Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality Provide a basis of understanding the characteristics of each rock mass class Relate the experience of rock conditions at one site to the conditions and experience encountered at others Derive quantitative data and guidelines for engineering design Provide common basis for communication between engineers and geologists
Download or read book Tunnelling in Weak Rocks written by Bhawani Singh and published by Elsevier. This book was released on 2011-08-29 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vast knowledge has been developed in the area of tunnelling in weak rocks over the years, and this book bridges an important gap by bringing all the information together for the benefit of the tunnelling Industry. In particular, tunnelling in poor conditions is a huge challenge for engineers and designers, and this book tackles all typical problems headon. Topics covered include classification approach, design approaches for site-specific grounds, a new invention on shielded tunnel boring machine, case histories, tunnel mechanics, risk engineering and management culture. Based on extensive field research experiences in Himalayan region and Alps Exclusive chapters on tunnelling hazards, squeezing ground conditions (a full detailed case study), swelling ground conditions, critical state rock mechanics, etc. Supported by over 180 figures and 90 tables of data, and test examples (with solutions)
Download or read book Rock Mass Classification written by B. Singh and published by Elsevier. This book was released on 1999-05-05 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mass Classifications - A Practical Approach in Civil Engineering was written in response to the many unanswered questions regarding this subject. Questions such as - Is Classification reasonably reliable? Can it be successful in crisis management of geohazards? Can a single Classification system be general for all rock structures? Is Classification a scientific approach? Laborious field research was undertaken in the Himalayan mountains by a team of scientists from the Central Mining Research Institute (CMRI), University of Roorkee (UOR), Central Soil and Material Research Station (CSMRS), U.P. Irrigation Research Institute (UPIRI), and Norwegian Geotechnical Institute (NGI) to answer these questions. The results obtained from the research work were systematically compiled to produce this book which bears particular relevance to civil, mining and petroleum engineers and geologists. Endorsements "It is a Handbook of Rock Engineering" - Zhao Jian, School of Civil & Structural Engineering, Nanyang Technological University, Singapore "I came across your new book - Rock Mass Classification, absolutely fantastic" - Subodh K. Jain, U.S.A
Download or read book On the role of constitutive behaviour in the response of squeezing ground to tunnelling written by Weijie Dong and published by vdf Hochschulverlag AG. This book was released on 2017-08-14 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Squeezing conditions in tunnelling are characterized by the occurrence of large deformations of the opening or high rock pressure that may overstress the lining. Squeezing is associated with poor quality rock. Tunnelling in squeezing ground involves great uncertainties. It is therefore very important to gain a better understanding of the underlying mechanisms. Triaxial testing is the main source of information in order to understand the mechanical features of squeezing ground. Despite the complexity of the squeezing mechanism and the behaviour observed under relatively simple loading conditions, most of previous research work and engineering design practice considers the ground as a linearly elastic, perfectly plastic material obeying the Mohr-Coulomb yield criterion. While the MC model is capable of predicting the final strength and post-failure volumetric behaviour of the squeezing rock, it cannot map some potentially important pre-failure features or the occasionally observed contractant plastic deformation. In addition, the MC model usually leads to an overestimation of the strength under undrained conditions, which is unsafe for tunnel design. The present thesis mainly addresses the influence of constitutive modelling on predictions about the response of squeezing ground to tunnelling in order to provide some general guidelines for basic engineering analysis. This objective is achieved by investigating the behaviour of squeezing rocks theoretically and experimentally, using samples from several tunnel projects, including the Gotthard base tunnel and the planned Gibraltar strait tunnel.
Download or read book Geohazards written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-08-13 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018. This volume discusses concepts of soil dynamics and studies related to earthquake geotechnical engineering, slope stability, and landslides. The papers presented in this volume analyze failures connected to geotechnical and geological origins to improve professional practice, codes of analysis and design. This volume will prove useful to researchers and practitioners alike.
Download or read book TBM Tunnelling in Jointed and Faulted Rock written by Nick R. Barton and published by CRC Press. This book was released on 2000-01-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the stage-by-stage development of a method for predicting the penetration rate (PR) and the advance rate (AR) for tunnel boring machines based on an expanded version of the Q-value, QTBM. The author analyzes 145 TBM tunnels that total 1,000km in length. He then develops simple formulae to estimate PR and AR from the QTBM value and to back-calculate QTBM from performance data. The book quantitatively explains actual advance rates as high as five m/hr for one day or as low as 0.005 m/hr for several months. It also covers logging methods, empirical TBM tunnel support design, and numerical verification of support.
Download or read book Design and Construction of Tunnels written by Pietro Lunardi and published by Springer Science & Business Media. This book was released on 2008-02-20 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work illustrates how the Analysis of Controlled Deformation in Rocks and Soils (ADECO-RS) is used in the design and the construction of tunnels. This is a very new and effective way of tunnel construction. The ADECO-RS approach makes a clear distinction between the design and the construction stages and allows reliable forecasts of construction times and costs to be made. It uses the advance core (the core of ground ahead of the face) as a structural tool for the long and short term stabilisation of tunnels, after its rigidity has first been regulated using conservation techniques.
Download or read book Practical Guide to Rock Tunneling written by Dean Brox and published by CRC Press. This book was released on 2017-04-11 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide to Rock Tunneling fills an important void in the literature for a practical guide to the design and construction of tunnels in rock. Practical Guide to Rock Tunneling takes the reader through all the critical steps of the design and construction for rock tunnels starting from geotechnical site investigations through to construction supervision. The guide provides suggestions and recommendations for practitioners on special topics of laboratory testing, durability of rock and acceptance for unlined water conveyance tunnels, overstressing or deep and long tunnels, risk-based evaluation of excavation methods, contract strategies, and post-construction inspections. Key considerations and lessons learned from selected case projects are presented based on the author’s extensive international experience of over 30 years and 1000 km of tunneling for civil, hydropower, and mining infrastructure, including some of the most recognized projects in the world to date. Instead of revisiting all theory and concepts that can be found in other sources, this book contains the hard learned lessons from the author’s experience in the field of Rock Tunneling, gathered over 30 years of service.
Download or read book Tunnel Engineering written by Michael Sakellariou and published by BoD – Books on Demand. This book was released on 2020-03-18 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of chapters covering a wide range of tunneling engineering topics. The scope was to present reviews of established methods and new approaches in construction practice and in digital technology tools like building information modeling. The book is divided in four sections dealing with geological aspects of tunneling, analysis and design, new challenges in tunnel construction, and tunneling in the digital era. Topics from site investigation and rock mass failure mechanisms, analysis and design approaches, and innovations in tunnel construction through digital tools are covered in 10 chapters. The references provided will be useful for further reading.
Download or read book Spatial Effects in Tunnelling Through Squeezing Ground written by Linard Cantieni and published by vdf Hochschulverlag AG. This book was released on 2011 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide to Rock Tunneling written by Dean Brox and published by CRC Press. This book was released on 2017-04-11 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide to Rock Tunneling fills an important void in the literature for a practical guide to the design and construction of tunnels in rock. Practical Guide to Rock Tunneling takes the reader through all the critical steps of the design and construction for rock tunnels starting from geotechnical site investigations through to construction supervision. The guide provides suggestions and recommendations for practitioners on special topics of laboratory testing, durability of rock and acceptance for unlined water conveyance tunnels, overstressing or deep and long tunnels, risk-based evaluation of excavation methods, contract strategies, and post-construction inspections. Key considerations and lessons learned from selected case projects are presented based on the author’s extensive international experience of over 30 years and 1000 km of tunneling for civil, hydropower, and mining infrastructure, including some of the most recognized projects in the world to date. Instead of revisiting all theory and concepts that can be found in other sources, this book contains the hard learned lessons from the author’s experience in the field of Rock Tunneling, gathered over 30 years of service.
Download or read book Tunneling in Rock written by Ernest Wahlstrom and published by Elsevier. This book was released on 2012-12-02 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunneling in Rock reviews the theory and practice of engineering geology and its application to tunneling in rocks. This book explores the history of tunneling, defines terminologies of tunneling, and illustrates tunnels. The book discusses the petrography of unaltered rocks, such as rock minerals, fragmental rocks, igneous rocks, sedimentary rocks and metamorphic rocks. The book then describes rock alteration, which may be caused by weathering. Such alterations are low-temperature alterations at moderate depths, hydrothermal alteration, deuteric alteration, pneumatolytic alteration, and other miscellaneous types of alteration. The book also discusses elementary rock mechanics, such as isotropism and anisotropism; mechanical properties of rocks; force and stress; and the fracture and fold anisotropy in rocks, including the deformation of minerals, elastic, quasi-elastic, and plastic rocks. The remaining chapters of the book focus on hydrogeology; geological investigation of proposed tunnel locations and its application to tunnel planning and design; different tunneling methods; and geological investigations during tunnel constructions. Those who are interested in geological aspects of planning and constructing tunnels will find this book valuable.
Download or read book Advances in RAMS Engineering written by Durga Rao Karanki and published by Springer Nature. This book was released on 2019-12-10 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys reliability, availability, maintainability and safety (RAMS) analyses of various engineering systems. It highlights their role throughout the lifecycle of engineering systems and explains how RAMS activities contribute to their efficient and economic design and operation. The book discusses a variety of examples and applications of RAMS analysis, including: • software products; • electrical and electronic engineering systems; • mechanical engineering systems; • nuclear power plants; • chemical and process plants and • railway systems. The wide-ranging nature of the applications discussed highlights the multidisciplinary nature of complex engineering systems. The book provides a quick reference to the latest advances and terminology in various engineering fields, assisting students and researchers in the areas of reliability, availability, maintainability, and safety engineering.
Download or read book Engineering Classification of Rock Masses for the Design of Tunnel Support written by Nicholas Barton and published by . This book was released on 1974 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Support of Underground Excavations in Hard Rock written by E. Hoek and published by CRC Press. This book was released on 2000-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and economical construction of tunnels, mines, and other subterranean works depends on the correct choice of support systems to ensure that the excavations are stable. These support systems should be matched to the characterstics of the rock mass and the excavation techniques adopted. Establishing the support requirements, designing support systems and installing these correctly are essential elements in safe underground construction. This is a comprehensive and practical work which also gives access to user-friendly computer programmes which enable the investigation and design of support techniques. Details on how to obtain this software are also included in the book.
Download or read book Innovative Solutions for Soil Structure Interaction written by Hany El-Naggar and published by Springer Nature. This book was released on 2019-11-01 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of soil structure interaction and soil dynamics. It discusses case studies as well as physical and numerical models of geostructures. Infrastructure is the key to create a sustainable community. It affects our future well-being as well as the economic climate. Indeed, the infrastructure we are building today will shape tomorrow's communities. GeoMEast 2019 created a venue for researchers and practitioners from all over the world to share their expertise to advance the role of innovative geotechnology in developing sustainable infrastructure. It covers soil structure interaction under static and dynamic loads, dynamic behavior of soils, and soil liquefaction. It is hoped that this book contributes to further advance the state of the art for the next-generation infrastructure.
