Download or read book Elementary Fluid Dynamics written by D. J. Acheson and published by Oxford University Press. This book was released on 1990-03-15 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a clear and concise introduction to both theory and application of fluid dynamics. It has a wide scope, frequent references to experiments, and numerous exercises (with hints and answers).
Download or read book Fluid Flow Problems written by Farhad Ali and published by BoD – Books on Demand. This book was released on 2019-05-29 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: In physics and engineering, fluid dynamics is a subdiscipline of fluid mechanics that describes the flow of fluids, liquids, and gases. It has several subdisciplines, including aerodynamics (the study of air and other gases in motion) and hydrodynamics (the study of liquids in motion). Fluid dynamics has a wide range of applications, including calculating forces and moments on aircraft, determining the mass flow rate of petroleum through pipelines, predicting weather patterns, understanding nebulae in interstellar space and modeling fission weapon detonation. In this book, we provide readers with the fundamentals of fluid flow problems. Specifically, Newtonian, non-Newtonian and nanofluids are discussed. Several methods exist to investigate such flow problems. This book introduces the applications of new, exact, numerical and semianalytical methods for such problems. The book also discusses different models for the simulation of fluid flow.
Download or read book Film Flow Within an Axially Rotating Horizontal Cylinder and Contact Lines on an Oscillating Plate written by Ziyuan Liu and published by . This book was released on 2001 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Falling Liquid Films written by S. Kalliadasis and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Falling Liquid Films gives a detailed review of state-of-the-art theoretical, analytical and numerical methodologies, for the analysis of dissipative wave dynamics and pattern formation on the surface of a film falling down a planar inclined substrate. This prototype is an open-flow hydrodynamic instability, that represents an excellent paradigm for the study of complexity in active nonlinear media with energy supply, dissipation and dispersion. It will also be of use for a more general understanding of specific events characterizing the transition to spatio-temporal chaos and weak/dissipative turbulence. Particular emphasis is given to low-dimensional approximations for such flows through a hierarchy of modeling approaches, including equations of the boundary-layer type, averaged formulations based on weighted residuals approaches and long-wave expansions. Whenever possible the link between theory and experiment is illustrated, and, as a further bridge between the two, the development of order-of-magnitude estimates and scaling arguments is used to facilitate the understanding of basic, underlying physics. This monograph will appeal to advanced graduate students in applied mathematics, science or engineering undertaking research on interfacial fluid mechanics or studying fluid mechanics as part of their program. It will also be of use to researchers working on both applied, fundamental theoretical and experimental aspects of thin film flows, as well as engineers and technologists dealing with processes involving isothermal or heated films. This monograph is largely self-contained and no background on interfacial fluid mechanics is assumed.
Download or read book The Optimal Homotopy Asymptotic Method written by Vasile Marinca and published by Springer. This book was released on 2015-04-02 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes in detail the applicability of the Optimal Homotopy Asymptotic Method to various engineering problems. It is a continuation of the book “Nonlinear Dynamical Systems in Engineering: Some Approximate Approaches”, published at Springer in 2011 and it contains a great amount of practical models from various fields of engineering such as classical and fluid mechanics, thermodynamics, nonlinear oscillations, electrical machines and so on. The main structure of the book consists of 5 chapters. The first chapter is introductory while the second chapter is devoted to a short history of the development of homotopy methods, including the basic ideas of the Optimal Homotopy Asymptotic Method. The last three chapters, from Chapter 3 to Chapter 5, are introducing three distinct alternatives of the Optimal Homotopy Asymptotic Method with illustrative applications to nonlinear dynamical systems. The third chapter deals with the first alternative of our approach with two iterations. Five applications are presented from fluid mechanics and nonlinear oscillations. The Chapter 4 presents the Optimal Homotopy Asymptotic Method with a single iteration and solving the linear equation on the first approximation. Here are treated 32 models from different fields of engineering such as fluid mechanics, thermodynamics, nonlinear damped and undamped oscillations, electrical machines and even from physics and biology. The last chapter is devoted to the Optimal Homotopy Asymptotic Method with a single iteration but without solving the equation in the first approximation.
Download or read book Optimal Auxiliary Functions Method for Nonlinear Dynamical Systems written by Vasile Marinca and published by Springer Nature. This book was released on 2021-07-14 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the optimal auxiliary functions method and applies it to various engineering problems and in particular in boundary layer problems. The cornerstone of the presented procedure is the concept of “optimal auxiliary functions” which are needed to obtain accurate results in an efficient way. Unlike other known analytic approaches, this procedure provides us with a simple but rigorous way to control and adjust the convergence of the solutions of nonlinear dynamical systems. The optimal auxiliary functions are depending on some convergence-control parameters whose optimal values are rigorously determined from mathematical point of view. The capital strength of our procedure is its fast convergence, since after only one iteration, we obtain very accurate analytical solutions which are very easy to be verified. Moreover, no simplifying hypothesis or assumptions are made. The book contains a large amount of practical models from various fields of engineering such as classical and fluid mechanics, thermodynamics, nonlinear oscillations, electrical machines, and many more. The book is a continuation of our previous books “Nonlinear Dynamical Systems in Engineering. Some Approximate Approaches”, Springer-2011 and “The Optimal Homotopy Asymptotic Method. Engineering Applications”, Springer-2015.
Download or read book Recent Trends in Coatings and Thin Film Modeling and Application written by Rahmat Ellahi and published by MDPI. This book was released on 2021-08-31 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue contains articles include, but not limited to, empirical, analytical, or design-oriented approaches to the following topics: Monitoring of carrying capacity and mechanisms for managing tourist flows in rural areas; Systems and tools to measure the social, economic, and environmental sustainability of rural tourism; Integration between public tourism policies and private strategies in the promotion and implementation of sustainable practices; Policies for promoting public participation in the planning and development of sustainable rural tourism; The impacts of tourism on traditional agricultural activities; Identity enhancement of the territory and its productions; "Good practices" in the implementation of rural tourism sustainability.
Download or read book Boundary Elements and Other Mesh Reduction Methods XXX written by L. Škerget and published by WIT Press. This book was released on 2008 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major motivation behind the Boundary Element Method (BEM) was to reduce the dependency of analysis on the definition of meshes. This has allowed the method to expand naturally into new techniques such as Dual Reciprocity and all other Mesh reduction Methods (MRM). MRM and BEM continue to be very active areas of research with many of the resulting techniques applied to solve increasingly complex problems. This book contains papers presented at the much-acclaimed thirtieth International Conference on Boundary Elements and other Mesh Reductions Methods . The proceedings contain papers on practically all major developments in Boundary Elements, including the most recent MRM techniques, grouped under the following topics: Fluid Flow; Heat Transfer; Electrical Engineering and Electromagnetics; Damage Mechanics and Fracture; Mesh Reduction Techniques; Advanced Computational Techniques
Download or read book Laminar Flow and Convective Transport Processes written by Howard Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow and Convective Transport Processes: Scaling Principles and Asymptotic Analysis presents analytic methods for the solution of fluid mechanics and convective transport processes, all in the laminar flow regime. This book brings together the results of almost 30 years of research on the use of nondimensionalization, scaling principles, and asymptotic analysis into a comprehensive form suitable for presentation in a core graduate-level course on fluid mechanics and the convective transport of heat. A considerable amount of material on viscous-dominated flows is covered. A unique feature of this book is its emphasis on scaling principles and the use of asymptotic methods, both as a means of solution and as a basis for qualitative understanding of the correlations that exist between independent and dependent dimensionless parameters in transport processes. Laminar Flow and Convective Transport Processes is suitable for use as a textbook for graduate courses in fluid mechanics and transport phenomena and also as a reference for researchers in the field.
Download or read book Thin Film Processes written by Hyun Wook Jung and published by MDPI. This book was released on 2020-12-29 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film processes are significantly incorporated in manufacturing display panels, secondary batteries, fuel/solar cells, catalytic films, membranes, adhesives, and other commodity films. This Special Issue on “Thin Film Processes” of Processes listed recent progress on thin-film processes, covering theoretical considerations, experimental observations, and computational techniques. Articles in this Issue consider comprehensive studies on thin film processes and related materials.
Download or read book Mechanics for a New Millennium written by Hassan Aref and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 2000 International Congress of Theoretical and Applied Mechanics. The book captures a snapshot view of the state of the art in the field of mechanics and will be invaluable to engineers and scientists from a variety of disciplines.
Download or read book Mechanics Of Thin Film Coatings The Proceedings Of The First European Coating Symposium written by Philip H Gaskell and published by World Scientific. This book was released on 1996-05-04 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains three keynote presentations, given by experts in the field of experimental methods, rheology and the modeling of coating dies. Included also are 40 contributions drawn from the following areas of coating research and application: instability and coating defects; surface treatment; spreading and leveling; experimental investigations; surface tension and gravity driven flows; roll and gravure coating; rheological effects in coating processes.As such, these proceedings should prove a valuable resource for both researchers and coating practitioners.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1975 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Dynamical Systems in Engineering written by Vasile Marinca and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and extend different known methods to solve different types of strong nonlinearities encountered by engineering systems. A better knowledge of the classical methods presented in the first part lead to a better choice of the so-called “base functions”. These are absolutely necessary to obtain the auxiliary functions involved in the optimal approaches which are presented in the second part. Every chapter introduces a distinct approximate method applicable to nonlinear dynamical systems. Each approximate analytical approach is accompanied by representative examples related to nonlinear dynamical systems from to various fields of engineering.
Download or read book Recent Trends in Mathematical Modeling and High Performance Computing written by Vinai K. Singh and published by Springer Nature. This book was released on 2021-08-23 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the connections between mathematical modeling, computational methods, and high performance computing, and how recent developments in these areas can help to solve complex problems in the natural sciences and engineering. The content of the book is based on talks and papers presented at the conference Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST), held at Inderprastha Engineering College in Ghaziabad, India in January 2020. A wide range of both theoretical and applied topics are covered in detail, including the conceptualization of infinity, efficient domain decomposition, high capacity wireless communication, infectious disease modeling, and more. These chapters are organized around the following areas: Partial and ordinary differential equations Optimization and optimal control High performance and scientific computing Stochastic models and statistics Recent Trends in Mathematical Modeling and High Performance Computing will be of interest to researchers in both mathematics and engineering, as well as to practitioners who face complex models and extensive computations.
Download or read book Heat Transfer Equipment Design written by R. K. Shah and published by CRC Press. This book was released on 1988-07-01 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Processes in Oscillatory Flow Conditions written by Artur J. Jaworski and published by MDPI. This book was released on 2018-04-06 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Heat Transfer Processes in Oscillatory Flow Conditions" that was published in Applied Sciences
