Download or read book The Theory of Transformations in Metals and Alloys written by J.W. Christian and published by Newnes. This book was released on 2002-12-10 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by . This book was released on 1981 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Transformations in Metals and Alloys written by J. W. Christian and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Transformations in Metals and Alloys Equilibrium and general kinetic theory written by John Wyrill Christian and published by Pergamon. This book was released on 1975 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Transformations in Metals and Alloys written by John W. Christian and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformation in Metals written by Nestor Perez and published by Springer Nature. This book was released on 2020-09-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains the physics of phase transformation and associated constraints from a metallurgical or materials science point of view, based on many topics including crystallography, mass transport by diffusion, thermodynamics, heat transfer and related temperature gradients, thermal deformation, and even fracture mechanics. The work presented emphasizes solidification and related analytical models based on heat transfer. This corresponds with the most fundamental physical event of continuous evolution of latent heat of fusion for directional or non-directional liquid-to-solid phase transformation at a specific interface with a certain geometrical shape, such as planar or curved front. Dr. Perez introduces mathematical and engineering approximation schemes for describing the phase transformation, mainly during solidification of pure metals and alloys. Giving clear definitions and explanations of theoretical concepts and full detail of derivation of formulae, this interdisciplinary volume is ideal for graduate and upper-level undergraduate students in applied science, and professionals in the metal making and surface reconstruction industries.
Download or read book The Theory of Transformations in Metals and Alloys written by John Wyrill Christian and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Transformations in Metals and Alloys written by John Wyrill Christian and published by . This book was released on 1965 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2016-06-24 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition discusses the fundamentals and applications of physical metallurgy. The book is comprised of 15 chapters that cover the experimental background of a metallurgical phenomenon. The text first talks about the structure of atoms and crystals, and then proceeds to dealing with the physical examination of metals and alloys. The third chapter tackles the phase diagrams and solidifications, while the fourth chapter covers the thermodynamics of crystals. Next, the book discusses the structure of alloys. The next four chapters deal with the deformations and defects of crystals, metals, and alloys. Chapter 10 discusses work hardening and annealing, while Chapters 11 and 12 cover phase transformations. The succeeding two chapters talk about creep, fatigue, and fracture, while the last chapter covers oxidation and corrosion. The text will be of great use to undergraduate students of materials engineering and other degrees that deal with metallurgical properties.
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book Phase Transformations in Metals and Alloys Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 2009-02-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to cover developments in the field over the past 17 years, and now reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys, Third Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types o
Download or read book Theory of Transformations in Steels written by Harshad K. D. H. Bhadeshia and published by CRC Press. This book was released on 2021-03-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading authority in the field of solid-state phase transformations, Theory of Transformations in Steels is the first book to provide readers with a complete discussion of the theory of transformations in steel. Offers comprehensive treatment of solid-state transformations, covering the vast number in steels Serves as a single source for almost any aspect of the subject Features discussion of physical properties, thermodynamics, diffusion, and kinetics Covers ferrites, martensite, cementite, carbides, nitrides, substitutionally-alloyed precipitates, and pearlite Contains a thoroughly researched and comprehensive list of references as further and recommended reading With its broad and deep coverage of the subject, this work aims at inspiring research within the field of materials science and metallurgy.
Download or read book Theory of Structural Transformations in Solids written by Armen G. Khachaturyan and published by Courier Corporation. This book was released on 2013-12-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing both theoretical and practical aspects of phase transformation in alloys, this text formulates significant aspects of the quantitative metallurgy of phase transformations. It further applies solid-state theoretical concepts to structure problems arising in experimental studies of real alloys. Author Armen G. Khachaturyan, Professor of Materials Science at Rutgers University, ranks among the foremost authorities on this subject. In this volume, he takes a creative approach to examining change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening. Unifying relationships among various fields of solid-state physics are stressed throughout the book. Topics include structure changes in two-phase alloys controlled by the phase transformation elastic strain, in addition to important results in the area of microscopic elasticity regarding problems of elastic interaction in impurity atoms, and strain-induced ordering and decomposition in interstitial solutions. An excellent text for advanced undergraduate and graduate courses in physical metallurgy, solid state physics, solid state chemistry, and materials science, this volume is also a valuable reference for professionals conducting research in phase transformations
Download or read book From Hamiltonians to Phase Diagrams written by Jürgen Hafner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the modern theory of metals and alloys has coincided with great advances in quantum-mechanical many-body theory, in electronic structure calculations, in theories of lattice dynamics and of the configura tional thermodynamics of crystals, in liquid-state theory, and in the theory of phase transformations. For a long time all these different fields expanded quite independently, but now their overlap has become sufficiently large that they are beginning to form the basis of a comprehensive first-principles the ory of the cohesive, structural, and thermodynamical properties of metals and alloys in the crystalline as well as in the liquid state. Today, we can set out from the quantum-mechanical many-body Hamiltonian of the system of electrons and ions, and, following the path laid out by generations of the oreticians, we can progress far enough to calculate a pressure-temperature phase diagram of a metal or a composition-temperature phase diagram of a binary alloy by methods which are essentially rigorous and from first prin ciples. This book was written with the intention of confronting the materials scientist, the metallurgist, the physical chemist, but also the experimen tal and theoretical condensed-matter physicist, with this new and exciting possibility. Of course there are limitations to such a vast undertaking as this. The selection of the theories and techniques to be discussed, as well as the way in which they are presented, are necessarily biased by personal inclination and personal expertise.
Download or read book Stability of Microstructure in Metallic Systems written by J. W. Martin and published by Cambridge University Press. This book was released on 1997-03-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this textbook, popular amongst students and faculty alike, investigates the various causes of thermodynamic instability in metallic microstructures. Materials theoretically well designed for a particular application may prove inefficient or even useless unless stable under normal working conditions. The authors examine current experimental and theoretical understanding of the kinetics behind structural change in metals. The entire text has been updated in this new edition, and a completely new chapter on highly metastable alloys has been added. The degree to which kinetic stability of the material outweighs its thermodynamic instability is very important, and dictates the useful working life of the material. If the structure is initially produced to an optimum, such changes will degrade the properties of the material. This comprehensive and well-illustrated text, accompanied by ample references, will allow final year undergraduates, graduate students and research workers to investigate in detail the stability of microstructure in metallic systems.
