Download or read book The Development of CVD Diamond Tracking Detectors for High Luminosity Experiments at the LHC written by Daniel Roff and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of Single Crystal Chemical Vapor Deposition Diamonds for Detector Applications written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD Diamond for Electronic Devices and Sensors written by Ricardo S. Sussmann and published by John Wiley & Sons. This book was released on 2009-01-09 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic diamond is diamond produced by using chemical or physical processes. Like naturally occurring diamond it is composed of a three-dimensional carbon crystal. Due to its extreme physical properties, synthetic diamond is used in many industrial applications, such as drill bits and scratch-proof coatings, and has the potential to be used in many new application areas A brand new title from the respected Wiley Materials for Electronic and Optoelectronic Applications series, this title is the most up-to-date resource for diamond specialists. Beginning with an introduction to the properties of diamond, defects, impurities and the growth of CVD diamond with its imminent commercial impact, the remainder of the book comprises six sections: introduction, radiation sensors, active electronic devices, biosensors, MEMs and electrochemistry. Subsequent chapters cover the diverse areas in which diamond applications are having an impact including electronics, sensors and actuators and medicine.
Download or read book Proceedings of the Fifth International Symposium on Diamond Materials written by Electrochemical Society. Meeting and published by The Electrochemical Society. This book was released on 1998 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Workshop of the INFN ELOISATRON Project written by Eugenio Nappi and published by World Scientific. This book was released on 2004 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possible upgrade of LHC or a future generation of colliders at the extreme limits of energy and luminosity will require detectors based on very advanced technological solutions to fully exploit the physics opportunities offered. Major steps must be taken to design and realize devices that are able not only to handle very high rates but also to cope with the very harsh radiation environment without suffering any performance degradation.This book reviews the present status, current limits and recent developments in detection techniques and related aspects (simulation, signal acquisition, tracking, particle identification, etc.). Novel ideas in this domain are discussed with emphasis on the directions in which improvements in proven techniques are desired.The proceedings have been selected for coverage in: OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings)OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)OCo CC Proceedings OCo Engineering & Physical Sciences"
Download or read book Physics and Applications of CVD Diamond written by Satoshi Koizumi and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs. Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is essential reading for everyone working in environments that involve conventional electronics, biotechnology, quantum computing, quantum cryptography, superconductivity and light emission from highly excited excitonic systems.
Download or read book Proceedings of the Workshop of the Collaboration of Forward Calorimetry at ILC written by and published by INN VInca. This book was released on 2008 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Detectors For Supercolliders Proceedings Of The 42nd Workshop Of The Infn Eloisatron Project written by Eugenio Nappi and published by World Scientific. This book was released on 2004-08-10 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possible upgrade of LHC or a future generation of colliders at the extreme limits of energy and luminosity will require detectors based on very advanced technological solutions to fully exploit the physics opportunities offered. Major steps must be taken to design and realize devices that are able not only to handle very high rates but also to cope with the very harsh radiation environment without suffering any performance degradation.This book reviews the present status, current limits and recent developments in detection techniques and related aspects (simulation, signal acquisition, tracking, particle identification, etc.). Novel ideas in this domain are discussed with emphasis on the directions in which improvements in proven techniques are desired.The proceedings have been selected for coverage in:• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences
Download or read book Pixel Detectors written by Leonardo Rossi and published by Springer Science & Business Media. This book was released on 2006-01-18 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pixel detectors are a particularly important class of particle and radiation detection devices. They have an extremely broad spectrum of applications, ranging from high-energy physics to the photo cameras of everyday life. This book is a general purpose introduction into the fundamental principles of pixel detector technology and semiconductor-based hybrid pixel devices. Although these devices were developed for high-energy ionizing particles and radiation beyond visible light, they are finding new applications in many other areas. This book will therefore benefit all scientists and engineers working in any laboratory involved in developing or using particle detection.
Download or read book Luminosity Measurement at the Compact Muon Solenoid Experiment of the LHC written by Olena Karacheban and published by Springer. This book was released on 2018-06-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of a novel technology for beam instrumentation and luminosity measurement and first results on a cutting edge technology potentially to be used after the upgrade of the Large Hadron Collider to higher luminosity. It presents a unique diamond-based luminometer with a detailed performance study. The online bunch-by-bunch luminosity measurements provide an invaluable feedback to the Collider for beam optimisation and for the understanding of beam dynamics. The precision of the luminosity measurement is crucial for all physics analyses. This book highlights the Van der Meer method, which is used for the calibration of the luminometers of the CMS (Compact Muon Solenoid) experiment, and describes the estimate of systematic uncertainties, e.g. due to radiation damage of sensors and electronics and uncertainties of beam parameters. For the future high-luminosity upgrade of the collider, sapphire sensors are investigated in a test beam. It is demonstrated for the first time that sapphire sensors can be used as single particle detectors. A model for the charge transport in sapphire is developed and successfully applied.
Download or read book A Hardware Track Trigger for CMS written by Thomas Owen James and published by Springer Nature. This book was released on 2019-10-28 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work described in this PhD thesis is a study of a real implementation of a track-finder system which could provide reconstructed high transverse momentum tracks to the first-level trigger of the High Luminosity LHC upgrade of the CMS experiment. This is vital for the future success of CMS, since otherwise it will be impossible to achieve the trigger selectivity needed to contain the very high event rates. The unique and extremely challenging requirement of the system is to utilise the enormous volume of tracker data within a few microseconds to arrive at a trigger decision. The track-finder demonstrator described proved unequivocally, using existing hardware, that a real-time track-finder could be built using present-generation FPGA-based technology which would meet the latency and performance requirements of the future tracker. This means that more advanced hardware customised for the new CMS tracker should be even more capable, and will deliver very significant gains for the future physics returns from the LHC.
Download or read book Development of Pixel Module Assembly Processes for the Phase 2 Upgrade of the ATLAS Detector and Test Beam Measurements with Diamond Pixel Detectors written by Helge Christoph Beck and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most powerful machines to study particle physics is the Large Hadron Collider (LHC). Starting in 2024, it will be upgraded to the High Luminosity-LHC (HL-LHC) to deliver even more data to measure with high precision Standard Model (SM) physics processes, and to maximise the potential to discover new physics. Higher luminosity implies a higher radiation environment, which poses challenges to the detectors of the experiments. To deal with radiation damage, pile up, and needed read-out speed, ATLAS will replace its current tracking detector with the new Inner Tracker (ITk). The inne...
Download or read book CMS Pixel Detector Upgrade and Top Quark Pole Mass Determination written by Simon Spannagel and published by Springer. This book was released on 2017-08-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis addresses two different topics, both vital for implementing modern high-energy physics experiments: detector development and data analysis. Providing a concise introduction to both the standard model of particle physics and the basic principles of semiconductor tracking detectors, it presents the first measurement of the top quark pole mass from the differential cross-section of tt+J events in the dileptonic tt decay channel. The first part focuses on the development and characterization of silicon pixel detectors. To account for the expected increase in luminosity of the Large Hadron Collider (LHC), the pixel detector of the compact muon solenoid (CMS) experiment is replaced by an upgraded detector with new front-end electronics. It presents comprehensive test beam studies conducted to verify the design and quantify the performance of the new front-end in terms of tracking efficiency and spatial resolution. Furthermore, it proposes a new cluster interpolation method, which utilizes the third central moment of the cluster charge distribution to improve the position resolution. The second part of the thesis introduces an alternative measurement of the top quark mass from the normalized differential production cross-sections of dileptonic top quark pair events with an additional jet. The energy measurement is 8TeV. Using theoretical predictions at next-to-leading order in perturbative Quantum Chromodynamics (QCD), the top quark pole mass is determined using a template fit method.
Download or read book The High Luminosity Large Hadron Collider written by Oliver Brüning and published by World Scientific Publishing Company. This book was released on 2015-08-28 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad introduction to the physics and technology of the High Luminosity Large Hadron Collider (HL-LHC). This new configuration of the LHC is one of the major accelerator projects for the next 20 years and will give new life to the LHC after its first 15-year operation. Not only will it allow more precise measurements of the Higgs boson and of any new particles that might be discovered in the next LHC run, but also extend the mass limit reach for detecting new particles. The HL-LHC is based on the innovative accelerator magnet technologies capable of generating 11–13 Tesla fields, with effectiveness enhanced by use of the new Achromatic Telescopic Squeezing scheme, and other state-of-the-art accelerator technologies, such as superconducting compact RF crab cavities, advanced collimation concepts, and novel power technology based on high temperature superconducting links. The book consists of a series of chapters touching on all issues of technology and design, and each chapter can be read independently. The first few chapters give a summary of the whole project, of the physics motivation and of the accelerator challenges. The subsequent chapters cover the novel technologies, the new configurations of LHC and of its injectors as well as the expected operational implications. Altogether, the book brings the reader to the heart of technologies for the leading edge accelerator and gives insights into next generation hadron colliders.
Download or read book Physics and Applications of CVD Diamond written by Satoshi Koizumi and published by John Wiley & Sons. This book was released on 2008-10-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs. Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is essential reading for everyone working in environments that involve conventional electronics, biotechnology, quantum computing, quantum cryptography, superconductivity and light emission from highly excited excitonic systems.
Download or read book Lepton photon Interactions Proceedings Of The Xvii International Symposium written by Zhi Peng Zheng and published by World Scientific. This book was released on 1996-07-26 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: The is the most important conference on high energy physics in 1995. The speakers and the list of topics discussed are as follows:
Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Newnes. This book was released on 2014-02-01 with total page 1809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.
