Download or read book Surface Complexation Modelling written by Johannes Lutzenkirchen and published by Elsevier. This book was released on 2006-09-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Complexation Modelling deals with various aspects associate to the modelling of solutes adsorption from of solutes from aqueous solutions to minerals. The individual contributions cover fundamental aspects and applications. Applications cover case studies and present consistent surface complexation parameter sets. The model approaches range from simplistic to mechanistic. More fundamental contributions address underlying phenomena or stress the opportunities of modern computational methods. Several mineral systems are covered, including goethite, gibbsite, clay minerals etc.Surface Complexation Modelling presents the state-of-the-art of surface complexation modelling and suggests ideas for further model development. A number of chapters are authored by scientists working on nuclear waste storage, where the retention of radionuclides contributes to preventing radionuclide migration from the repository to the biosphere. Other contributions come from soil and environmental chemists with an interest in reactive transport of pollutants in soils or aquifers. Covering a wide range of disciplines Bringing together contributions from experts in the field Providing a balance between the theoretical and applied aspects

Download or read book Surface Complexation Modeling written by Athanasios K. Karamalidis and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a description of the generalized two layer surface complexation model, data treatment procedures, and thermodynamic constants for sorption of metal cations and anions on gibbsite, the most common form of aluminum oxide found in nature and one of the most abundant minerals in soils, sediments, and natural waters. The book provides a synopsis of aluminum oxide forms and a clearly defined nomenclature. Compilations of available data for sorption of metal cations and anions on gibbsite are presented, and the results of surface complexation model fitting of these data are given. The consistency of the thermodynamic surface complexation constants extracted from the data is examined through development of linear free energy relationships which are also used to predict thermodynamic constants for ions for which insufficient data are available to extract constants. The book concludes with a comparison of constants extracted from data for sorption on gibbsite with those determined previously for hydrous ferric oxide (HFO), hydrous manganese oxide (HMO), and goethite. The overall objective of this book is the development and presentation of an internally consistent thermodynamic database for sorption of inorganic cations and anions on gibbsite, an abundant and reactive mineral in soils, sediments, and aquatic systems. Its surface has a high affinity for sorption of metal cations and anions, including radionuclides. The gibbsite database will enable simulation and prediction of the influence of sorption on the fate of these chemical species in natural systems and treatment processes in which aluminum oxides are abundant. It thus will help to advance the practical application of surface complexation modeling.

Download or read book Surface Complexation Modeling written by David A. Dzombak and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a description of the thermodynamic model, data treatment procedures and the thermodynamic constants for hydrous ferric oxide. Includes detailed coverage of the model and the parameter extraction procedure.

Download or read book Mineral Water Interface Geochemistry written by Michael F. Hochella and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 23 of Reviews in Mineralogy and accompanying MSA short course covers chemical reactions that take place at mineral-water interfaces. We believe that this book describes most of the important concepts and contributions that have driven mineral-water interface geochemistry to its present state. We begin in Chapter 1 with examples of the global importance of mineral-water interface reactions and a brief review of the contents of the entire book. Thereafter, we have divided the book into four sections, including atomistic approaches (Chapters 2- 3), adsorption (Chapters 4-8), precipitation and dissolution (Chapters 9-11), and oxidation-reduction reactions (Chapters 11-14).

Download or read book Surface Complexation Modeling written by Athanasios K. Karamalidis and published by John Wiley & Sons. This book was released on 2010-10-05 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a description of the generalized two layer surface complexation model, data treatment procedures, and thermodynamic constants for sorption of metal cations and anions on gibbsite, the most common form of aluminum oxide found in nature and one of the most abundant minerals in soils, sediments, and natural waters. The book provides a synopsis of aluminum oxide forms and a clearly defined nomenclature. Compilations of available data for sorption of metal cations and anions on gibbsite are presented, and the results of surface complexation model fitting of these data are given. The consistency of the thermodynamic surface complexation constants extracted from the data is examined through development of linear free energy relationships which are also used to predict thermodynamic constants for ions for which insufficient data are available to extract constants. The book concludes with a comparison of constants extracted from data for sorption on gibbsite with those determined previously for hydrous ferric oxide (HFO), hydrous manganese oxide (HMO), and goethite. The overall objective of this book is the development and presentation of an internally consistent thermodynamic database for sorption of inorganic cations and anions on gibbsite, an abundant and reactive mineral in soils, sediments, and aquatic systems. Its surface has a high affinity for sorption of metal cations and anions, including radionuclides. The gibbsite database will enable simulation and prediction of the influence of sorption on the fate of these chemical species in natural systems and treatment processes in which aluminum oxides are abundant. It thus will help to advance the practical application of surface complexation modeling.

Download or read book Geochemical and Biogeochemical Reaction Modeling written by Craig M. Bethke and published by Cambridge University Press. This book was released on 2010-12-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of reaction processes in the Earth's crust and on its surface, both in the laboratory and in the field. A clear exposition of the underlying equations and calculation techniques is balanced by a large number of fully worked examples. The book uses The Geochemist's Workbench® modeling software, developed by the author and already installed at over 1000 universities and research facilities worldwide. Since publication of the first edition, the field of reaction modeling has continued to grow and find increasingly broad application. In particular, the description of microbial activity, surface chemistry, and redox chemistry within reaction models has become broader and more rigorous. These areas are covered in detail in this new edition, which was originally published in 2007. This text is written for graduate students and academic researchers in the fields of geochemistry, environmental engineering, contaminant hydrology, geomicrobiology, and numerical modeling.

Download or read book Applied Soil Chemistry written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the state-of-the-art information regarding applied soil sciences. It covers the fundamentals, model concepts, principles, chemical reactions, functions, chemical recycling, chemical weathering, acid-base chemistry, carbon sequestration, and nutrient availability of soils. Also, it includes soil chemistry of heavy-metals, environment, clay, ion-exchange processes, analytical tools and applications. This book helps to understand the about soil characteristics targeting soil chemical reactions and interactions and its applications.

Download or read book Description of Input and Examples for Phreeqc Version 3 written by David L. Parkhurst and published by Createspace Independent Publishing Platform. This book was released on 2014-07-17 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHREEQC version 3 is a computer program written in the C and C++ programming languages that is designed to perform a wide variety of aqueous geochemical calculations. PHREEQC implements several types of aqueous models: two ion-association aqueous models (the Lawrence Livermore National Laboratory model and WATEQ4F), a Pitzer specific-ion-interaction aqueous model, and the SIT (Specific ion Interaction Theory) aqueous model. Using any of these aqueous models, PHREEQC has capabilities for (1) speciation and saturation-index calculations; (2) batch-reaction and one-dimensional (1D) transport calculations with reversible and irreversible reactions, which include aqueous, mineral, gas, solid-solution, surface-complexation, and ion-exchange equilibria, and specified mole transfers of reactants, kinetically controlled reactions, mixing of solutions, and pressure and temperature changes; and (3) inverse modeling, which finds sets of mineral and gas mole transfers that account for differences in composition between waters within specified compositional uncertainty limits.

Download or read book Groundwater Geochemistry written by Broder J. Merkel and published by Springer Science & Business Media. This book was released on 2008-05-30 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: To understand hydrochemistry and to analyze natural as well as man-made impacts on aquatic systems, hydrogeochemical models have been used since the 1960’s and more frequently in recent times. Numerical groundwater flow, transport, and geochemical models are important tools besides classical deterministic and analytical approaches. Solving complex linear or non-linear systems of equations, commonly with hundreds of unknown parameters, is a routine task for a PC. Modeling hydrogeochemical processes requires a detailed and accurate water analysis, as well as thermodynamic and kinetic data as input. Thermodynamic data, such as complex formation constants and solubility-products, are often provided as databases within the respective programs. However, the description of surface-controlled reactions (sorption, cation exchange, surface complexation) and kinetically controlled reactions requires additional input data. Unlike groundwater flow and transport models, thermodynamic models, in principal, do not need any calibration. However, considering surface-controlled or kinetically controlled reaction models might be subject to calibration. Typical problems for the application of geochemical models are: • speciation • determination of saturation indices • adjustment of equilibria/disequilibria for minerals or gases • mixing of different waters • modeling the effects of temperature • stoichiometric reactions (e.g. titration) • reactions with solids, fluids, and gaseous phases (in open and closed systems) • sorption (cation exchange, surface complexation) • inverse modeling • kinetically controlled reactions • reactive transport Hydrogeochemical models depend on the quality of the chemical analysis, the boundary conditions presumed by the program, theoretical concepts (e.g.

Download or read book The Chemical Bond in Inorganic Chemistry written by Ian David Brown and published by Oxford University Press on Demand. This book was released on 2002 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bond valence model is a recently developed model of the chemical bond in inorganic chemistry that complements the bond model widely used in organic chemistry. It is simple, quantitative, intuitive, and predictive - no more than a pocket calculator is needed to calculate it. This book focuses on the theory that underlies the model, and shows how it has been used in physics, materials science, chemistry, mineralogy, soil science, and molecular biology.

Download or read book Environmental Arsenic in a Changing World written by Yongguan Zhu and published by CRC Press. This book was released on 2019-08-23 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Congress "Arsenic in the Environment" offers an international, multi- and interdisciplinary discussion platform for research and innovation aimed towards a holistic solution to the problem posed by the environmental toxin arsenic, with significant societal impact. The Congress has focused on cutting edge and breakthrough research in physical, chemical, toxicological, medical, agricultural and other specific issues on arsenic across a broader environmental realm. The Biennial Congress "Arsenic in the Environment" was first organized in Mexico City (As2006) followed by As2008 in Valencia (Spain), As2010 in Tainan (Chinese Taiwan), As2012 in Cairns (Australia), As2014 in Buenos Aires (Argentina) and As2016 in Stockholm (Sweden). The 7th International Congress As2018 was held July 1-6, 2018, in Beijing, P. R. China and was entitled Environmental Arsenic in a Changing World. The Congress addressed the broader context of arsenic research aligned on the following themes: Theme 1: Arsenic Behaviour in Changing Environmental Media Theme 2: Arsenic in a Changing Agricultural Ecosystem Theme 3: Health Impacts of Environmental Arsenic Theme 4: Technologies for Arsenic Immobilization and Clean Water Blueprints Theme 5: Sustainable Mitigation and Management Arsenic in drinking water (mainly groundwater) has emerged as an issue of global health concern. During last decade, the presence of arsenic in rice, possibly also other food of plant origins, has attained increasing attention. This is particularly true in the Asian countries, where the use of high arsenic groundwater as source of irrigation water and drinking water has been flagged as severe health concern. This has been accentuated by elevating arsenic concentrations in deep groundwater recharged from shallow high arsenic groundwater, which may have further detrimental effects on public health. Notably, China has been in the forefront of research on arsenic biogeochemical cycling, health effects of arsenic, technologies for arsenic removal, and sustainable mitigation measures. The Congress has attracted professionals involved in different segments of interdisciplinary research on arsenic in an open forum, and strengthened relations between academia, research institutions, government and non-governmental agencies, industries, and civil society organizations to share an optimal ambience for exchange of knowledge.

Download or read book Carbon Nanomaterial Based Adsorbents for Water Purification written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2020-06-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deterioration of water quality and unavailability of drinkable water are pressing challenges worldwide. The removal of toxic organic and inorganic pollutants from water is vital for a clean environment, as a response to water scarcity. Adsorption-based water technologies are among the most widely used because of their high efficiency and low cost, without relying on a complex infrastructure. In recent years, carbon nanomaterials (CNMs), such as graphene and derivatives, carbon nanotubes, carbon nanofibers, nanoporous carbon, fullerenes, graphitic carbon nitride, and nanodiamonds have been extensively exploited as adsorbents due to their extraordinary surface properties, ease of modification, large surface area, controlled structural varieties, high chemical stability, porosity, low density, ease of regeneration, and reusability. This book provides a thorough overview of the state of the art in carbon nanomaterials as they are used for adsorption applications in water purifications, as well as addressing their toxicological challenges. This volume primarily explores the fundamentals of adsorption, its mechanical aspects, synthesis and properties of CNMs, and adsorption performances of CNMs and their nanocomposites with organic and inorganic materials. Structural engineering and activation processes produce materials with enhanced adsorptive properties and separation efficiencies. Furthermore, the formation of CNMs with 2D and 3D macro-and microstructures and high porosities is a potential approach to improve adsorption performances and extend CNM use at the industrial level. The book also addresses important issues regarding these adsorbents that potentially affect future research and industrial applications of carbon-based nanoadsorbents in water security. Presents advances in multifunctional 3D superstructures of carbon nanomaterials and their composites for adsorption applications Outlines the fundamentals on synthesis and characterization techniques of carbon-based nanostructures and their composites Assesses the major toxicological challenges in using nanostructured materials as adsorbents for water purification

Download or read book Chemical Properties of Material Surfaces written by Marek Kosmulski and published by CRC Press. This book was released on 2001-07-18 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of the adsorption of inorganics from aqueous solution on inorganic adsorbents. It emphasizes the relationship between adsorption and surface charging, highlighting simple and complex adsorption systems sorted by the adsorbent as well as the adsorbate. The author includes a comprehensive collection of pristine PZC of different materials - covering crystallographic structure, methods of preparation, impurities in the solid, temperature and ionic composition of the solution, experimental methods to determine PZC, and the correlation between zero points and other physical quantities.

Download or read book User s Guide to PHREEQC written by David L. Parkhurst and published by . This book was released on 1995 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physics and Chemistry of Mineral Surfaces written by Patrick V. Brady and published by CRC Press. This book was released on 2020-12-17 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have brought a near exponential increase in the amount known about mineral surfaces. Get a handle on this overwhelming mountain of information with The Physics and Chemistry of Mineral Surfaces. This much-needed text will save you hours of tedious journal searches by providing an excellent condensation and overview of the entire field, including its future direction. Top researchers outline atomistic controls on mineral surface structure and reactions; apply these concepts to explain sorption, mineral corrosion and growth; and ultimately consider the role of surfaces in environmental and geochemical processes. This unique text provides a rich and rigorous treatment of these subjects by combining surface physics and chemistry - highlighting their useful, yet often ignored, complementary nature. Unlike other texts, The Physics and Chemistry of Mineral Surfaces also stresses the linkage between fundamentals of mineral surface science and specific real-world problems. This connection facilitates the application of surface physics and chemistry to macroscopic, global processes, such as the origins of life, global warming, and environment degradation. Nowhere else will you find a text on this topic that combines expansive coverage with clear-cut practical applications. Don't miss out! The Physics and Chemistry of Mineral Surfaces has it all.

Download or read book Interactions at the Soil Colloid written by G.H. Bolt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 20 years ago the emphasis in soil chemistry research switched from studies of problems related to scarcities of plant nutrients to those arising from soil pollutants. The new problems have come about because of the excessive uses of fertilizers, the inputs from farm and industrial wastes, the widespread applications of anthropogenie xenobiotic chemicals, and the deterioration of soil structure resulting from certain modern agriculture practises. The International Society of Soil Science (ISSS) recognized these problems and challenges. A provisional Working Group was set up in 1978 to focus attention on soil colloids with a view to understanding better the interactions wh ich take place at their surfaces. It was recognized that these interactions are fundamental to problems of soil fertility, as weIl as to those of soil pollution. After the group had received the official support of ISSS at its 12th International Congress in New Delhi in 1982 it set as its priority the assembling and evaluation of information, relevant to the soil and environmental sciences, concerning the composition and structure of soil colloids. Prior to that aseries of Position Papers were published in the Bulletin of the International Society of Soil Science (Vol. 61, 1981) outlining the state of knowledge about the composition and properties of soil colloids.

Download or read book Black Sea Oceanography written by E. Izdar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Çesme, Izmir, Turkey, October 23-27, 1989