Download or read book Basic Principles of Nanotechnology written by Wesley C. Sanders and published by CRC Press. This book was released on 2018-07-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book allows the reader to have a basic understanding of the structure and properties of nanoscale materials routinely used in nanotechnology-based research and industries. To add, the book describes the operation of nanoscale transistors and the processes used to fabricate the devices. Additionally, it presents research involving the use of carbon nanotubes, graphene, and molecules to create non-silicon based electronic devices. It aims to provide an understanding of the operation of the most frequently used fabrication and characterization procedures, such as scanning electron microscopy, atomic force microscopy, etch, e-beam lithography, and photolithography. Provides explanations of the common techniques used in nanofabrication. Focuses on nanomaterials that are almost exclusively used in academic research and incorporated in consumer materials, such as carbon nanotubes, graphene, metal nanoparticles, quantum dots, and conductive polymers. Each chapter begins with a list of key objectives describing major content covered. Includes end-of-chapter questions to reinforce chapter content.
Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.
Download or read book Principles of Nanotechnology written by G. Ali Mansoori and published by World Scientific. This book was released on 2005 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Gives unified presentation of many of the major principles in nanotechnology: molecular-based study of condensed matter in small systems. - Authored by an expert in the molecular-based study of matter - Accessible to students, yet of interest to experts - Emphasizes the intrinsic beauty of methods of bottom-up nanotechnology - Includes many full-color figures
Download or read book Plant Nanotechnology written by Chittaranjan Kole and published by Springer. This book was released on 2016-10-13 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the implications of nanotechnology in plant sciences, particularly its potential to improve food and agricultural systems, through innovative, eco-friendly approaches, and as a result to increase plant productivity. Topics include various aspects of nanomaterials: biophysical and biochemical properties; methods of treatment, detection and quantification; methods of quantifying the uptake of nanomaterials and their translocation and accumulation in plants. In addition, the effects on plant growth and development, the role of nanoparticles in changes in gene and protein expression, and delivery of genetic materials for genetic improvement are discussed. It also explores how nanotechnology can improve plant protection and plant nutrition, and addresses concerns about using nanoparticles and their compliances. This book provides a comprehensive overview of the application potential of nanoparticles in plant science and serves as a valuable resource for students, teachers, researchers and professionals working on nanotechnology.
Download or read book Nanotechnology written by Rakesh K. Sindhu and published by CRC Press. This book was released on 2021-05-27 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Is an ideal introduction for scientists, engineers, researchers, and potential readers in nanotechnology • Allows readers to swiftly clench the discoursed concepts through the overviews of various fields of nanotechnology, concise summaries, and future prospects presented in the chapters • Discusses the design, methods of production and applications, and their impression on widespread areas of nanotechnology • Is illustrated throughout with excellent figures and has references accompanying each chapter
Download or read book Cancer Nanotechnology written by Sang Hyun Cho and published by Taylor & Francis. This book was released on 2016-04-19 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid advances in nanotechnology have enabled the fabrication of nanoparticles from various materials with different shapes, sizes, and properties, and efforts are ongoing to exploit these materials for practical clinical applications. Nanotechnology is particularly relevant in the field of oncology, as the leaky and chaotic vasculature of tumors-a
Download or read book Food Nanotechnology written by C. Anandharamakrishnan and published by CRC Press. This book was released on 2019-01-22 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology offers great potential to revolutionize conventional food science and the food industry. The use of nanotechnology in the food industry promises improved taste, flavor, color, texture, and consistency of foodstuffs and increased absorption and bioavailability of nutraceuticals. Food Nanotechnology: Principles and Applications examines the current state of nanoscale phenomena and processes, benefits and risks of nanotechnology. This work contains 18 chapters particularly focused on the design, production, and utilization of nanoparticles, with specific applications for the food industry. Through several studies, it has been proven that nanotechnology can offer distinct advantages over conventional methods in terms of functionality, targeted delivery of food bioactive compounds, improved food quality characteristics like texture, taste, sensory attributes and improved stability in the gastrointestinal tract, and controlled release profiles. Features Offers clear and concise coverage on application of nanotechnology in nutrient delivery, food packaging, and pathogen/pesticide detection Addresses both the technological aspects of delivering nano-based food products and the societal implications that affect take-up Covers broad range of topics including nanoemulsification, electrospraying, nanocomposites, plasma processing, and nanosensors Discusses different formulation and preparation methods for loading food bioactive compounds Exploratory in nature, this book presents the latest of such data on all aspects of applications of nanotechnology in food systems. With its practical focus on the fabrication and application of nanotechnology in food, this book is a valuable resource for students, researchers, food process engineers.
Download or read book Principles of Nano Optics written by Lukas Novotny and published by Cambridge University Press. This book was released on 2012-09-06 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and in its second edition, this standard reference on nano-optics is ideal for graduate students and researchers alike.
Download or read book Nanotechnology in Oil and Gas Industries written by Tawfik Abdo Saleh and published by Springer. This book was released on 2017-10-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a powerful source to develop new, rapid and highly efficient materials for the application in various fields of oil and gas. It focuses on the synthesis, characterization and applications of various Nanomaterials, presenting the state-of-the-art in developments and innovations in nanocomposites. This book provides the complete practical and theoretical information about the synthesis of nanoparticles with potential use in the field of oil and gas.
Download or read book Bionanotechnology written by Anil Kumar Anal and published by CRC Press. This book was released on 2018-02-02 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a subject of high interest and importance in all sectors, including biomedical, food, agriculture, energy, and environment. Biological systems are essential in nanotechnology, and many new applications are being developed by mimicking the natural systems. Approaching these topics from an engineering perspective, the book offers insight on the details of nanoscale fabrication processes as well as cell biology. The basics of biology and chemistry, with a focus on how to engineer the behavior of molecules at the nanoscale, are also explored and analyzed. The aim of the text is to provide the reader with broader knowledge of biological methods for signal transduction and molecular recognitions systems and how they can be replicated in bio-sensing applications. The reader will learn the basic structures and interactions of biomacromolecules for developing biocompatible and eco-friendly devices.
Download or read book Basic Principles of Nanotechnology written by Wesley C. Sanders and published by CRC Press. This book was released on 2018-07-11 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book allows the reader to have a basic understanding of the structure and properties of nanoscale materials routinely used in nanotechnology-based research and industries. To add, the book describes the operation of nanoscale transistors and the processes used to fabricate the devices. Additionally, it presents research involving the use of carbon nanotubes, graphene, and molecules to create non-silicon based electronic devices. It aims to provide an understanding of the operation of the most frequently used fabrication and characterization procedures, such as scanning electron microscopy, atomic force microscopy, etch, e-beam lithography, and photolithography. Provides explanations of the common techniques used in nanofabrication. Focuses on nanomaterials that are almost exclusively used in academic research and incorporated in consumer materials, such as carbon nanotubes, graphene, metal nanoparticles, quantum dots, and conductive polymers. Each chapter begins with a list of key objectives describing major content covered. Includes end-of-chapter questions to reinforce chapter content.
Download or read book Nanotechnologies written by Union européenne. Direction générale de la recherche and published by . This book was released on 2012 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium has been specifically developed to provide the educational communities with relevant, accurate and updated materials to inform, motivate and inspire young people to know more about nanosciences and nanotechnologies concepts and applications. It has been developed within the context of the European research project Nanoyou, and it has been enriched by the authors with numerous and multifaceted inputs, reflections and insights on societal issues, also provided by the European project TimeforNano. The outcomes from all these efforts have been integrated into a comprehensive and fully referenced book to present a single, balanced compendium about these disciplines. Theory, application, experiments and discussion on the ethical, societal and safety aspects are organised in self-contained modules that offer increased flexibility throughout the development of the course. Also, a case study approach provides educators and teachers with practical applications and examples to discuss in class, supported by online tutor web portals to enable participating in virtual dialogues, experiments and games. The lessons, discussions on applications and hands-on experiments presented in this book have been tested and enriched from 2010 to 2011 by hundreds of teachers, professors and educators from about one thousand schools in 20 countries in Europe and beyond, involving about 40.000 students. This stimulating, challenging and enriching experience enabled us to produce the far-reaching, broadranging and inclusive book you have in your hands. -- Publisher description.
Download or read book Principles of Nanoscience and Nanotechnology written by M. A. Shah and published by Alpha Science International, Limited. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this book introduces the systematic development of materials and their long journey to nanodimensions and how nano has moved from the world of the future to the world of the present. It also emphasises how the unique properties of nanomaterials have motivated researchers to develop simpler and inexpensive techniques to produce nanostructures of technologically-important materials using both top down approaches which rely on continuous breaking up of the bulk matter and bottom up approaches which build the nanostructures by its constituent units. Both these approaches have been discussed in detail. Part Three of the book introduces the invention and development of sophisticated equipment for the characterization, measurement and manipulation of nanomaterials i.e., Atomic Force Microscope to study the nanomaterials down to atomic scale. The Fourth part describes the significant impact on almost all industries and all areas of society which will offer better built, longer lasting, cleaner, safer and smarter products for home, communication, medicine, transportation, agriculture and for industry in general.
Download or read book Nanotechnology written by Jeremy Ramsden and published by William Andrew. This book was released on 2016-05-11 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology: An Introduction, Second Edition, is ideal for the newcomer to nanotechnology, someone who also brings a strong background in one of the traditional disciplines, such as physics, mechanical or electrical engineering, or chemistry or biology, or someone who has experience working in microelectromechanical systems (MEMS) technology. This book brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field. The book's author, Prof Ramsden, also discusses design, manufacture, and applications and their impact on a wide range of nanotechnology areas. Provides an overview of the rapidly growing and developing field of nanotechnology Focuses on key essentials, and structured around a robust anatomy of the subject Brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field
Download or read book Nanotechnology written by Paresh Chandra Ray and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume explores the emerging science of nanotechnology which deals with the understanding of the fundamental physics, chemistry, biology, material science and technology of nanometer scale objects, which has become a central pillar for the next generation medical challenges such as developing tiny nanodevices, as well as for food technology. There is no doubt that the development of emerging nanotechnology based nanomedicine, nanodevices for diagnostics and therapy, drug delivery systems and other applications are fast growing research areas for chemistry, biology, physics, medicine and different disciplines of engineering. On the other hand, due to the possible use in human health and food technology, the same emerging technology might raise new ethical issues and therefore require careful analysis of ethical aspects. To summarize the recent growth, the first volume in the Nanotechnology: Principles, Applications and Ethical Considerations series discusses the basic science behind the emerging technology, which is necessary to understand how these tiny materials can be used in our daily lives. This book provides a state-of-the-art overview of this rapidly-expanding and fascinating field from the molecular level to possible applications in the medical field. It contains eight chapters written by world renowned experts in this area, covering from basic science to possible nanomedicine designs, which can have numerous applications in our society. This book is unique in its design and content, providing a depth of science for readers that will help them understand the benefits and limitations of nanotechnology as well as its ethical and social implications.
Download or read book Handbook of Industrial Chemistry and Biotechnology written by James A. Kent and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantially revising and updating the classic reference in the field, this handbook offers a valuable overview and myriad details on current chemical processes, products, and practices. No other source offers as much data on the chemistry, engineering, economics, and infrastructure of the industry. The Handbook serves a spectrum of individuals, from those who are directly involved in the chemical industry to others in related industries and activities. It provides not only the underlying science and technology for important industry sectors, but also broad coverage of critical supporting topics. Industrial processes and products can be much enhanced through observing the tenets and applying the methodologies found in chapters on Green Engineering and Chemistry (specifically, biomass conversion), Practical Catalysis, and Environmental Measurements; as well as expanded treatment of Safety, chemistry plant security, and Emergency Preparedness. Understanding these factors allows them to be part of the total process and helps achieve optimum results in, for example, process development, review, and modification. Important topics in the energy field, namely nuclear, coal, natural gas, and petroleum, are covered in individual chapters. Other new chapters include energy conversion, energy storage, emerging nanoscience and technology. Updated sections include more material on biomass conversion, as well as three chapters covering biotechnology topics, namely, Industrial Biotechnology, Industrial Enzymes, and Industrial Production of Therapeutic Proteins.
Download or read book Atomic Layer Deposition written by Tommi Kääriäinen and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition was published in 2008, Atomic Layer Deposition (ALD) has emerged as a powerful, and sometimes preferred, deposition technology. The new edition of this groundbreaking monograph is the first text to review the subject of ALD comprehensively from a practical perspective. It covers ALD's application to microelectronics (MEMS) and nanotechnology; many important new and emerging applications; thermal processes for ALD growth of nanometer thick films of semiconductors, oxides, metals and nitrides; and the formation of organic and hybrid materials.
