Download or read book Handbook of Benzoxazine Resins written by Hatsuo Ishida and published by Elsevier. This book was released on 2011-07-13 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a wide overview of the field, fundamental understanding of the synthetic methods and structure/property correlation, as well as studies related to applications in a wide range of subjects. The handbook also provides 1H and 13C NMR spectra, FTIR spectra, DSC and TGA thermograms to aid in research activities. Additional tables on key NMR and FTIR frequencies unique to benzoxazine, heat of polymerization, Tg, and char yield will greatly aid in the choice of proper benzoxazine for a specific application. - Provides thorough coverage of the chemistry and applications of benzoxazine resins with an evidence-based approach to enable chemists, engineers and material scientists to evaluate effectiveness - Features spectra, which allow researchers to compare results, avoid repetition and save time as well as tables on key NMR frequency, IR frequency, heat of polymerization, of many benzoxazine resins to aid them in selection of materials - Written by the foremost experts in the field

Download or read book Fundamentals of Polymerization written by Broja Mohan Mandal and published by World Scientific. This book was released on 2013 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last twenty years, the field of the chemistry of polymerization witnessed enormous growth through the development of new concepts, catalysts, processes etc. Examples are: non classical living polymerizations (group transfer polymerization, living carbocationic polymerization, living radical polymerization and living ring-opening metathesis polymerization (ROMP)); new catalysts (metallocenes and late transition metal catalysts for stereospecific polymerization, Schrock and Grubbs catalyst for ROMP among others) and new processes such as miniemulsion, microemulsion polymerization and dispersion polymerization (in polar solvents). Apart from the developments in the chemistry of polymerization, methods have been developed for the evaluation of highly reliable rate constants of propagation in radical as well as cationic polymerization. All these have revolutionized the field of synthetic polymer chemistry. In the book, fundamentals of both the new and old polymerization chemistry have been dealt with. The new chemistry has been given nearly equal space along with the old.

Download or read book Handbook of Polymer Science and Technology written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 1989-07-31 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Chemistry of Radical Polymerization written by Graeme Moad and published by Elsevier. This book was released on 2006 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commences with a general introduction outlining the basic concepts of radical polymerization. This is followed by a chapter on radical reactions that is intended to lay the theoretical ground-work for the succeeding chapters on initiation, propagation and termination.

Download or read book Polymer Science and Technology written by Robert O. Ebewele and published by CRC Press. This book was released on 2000-03-23 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your search for the perfect polymers textbook ends here - with Polymer Science and Technology. By incorporating an innovative approach and consolidating in one volume the fundamentals currently covered piecemeal in several books, this efficient text simplifies the learning of polymer science. The book is divided into three main sections: po

Download or read book Handbook of Ring Opening Polymerization written by Philippe Dubois and published by John Wiley & Sons. This book was released on 2009-03-02 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, truly one-stop reference discusses monomers, methods, stereochemistry, industrial applications and more. Chapters written by internationally acclaimed experts in their respective fields cover both basic principles and up-to-date information, ranging from the controlled ring-opening polymerization methods to polymer materials of industrial interest. All main classes of monomers including heterocyclics, cyclic olefins and alkynes, and cycloalkanes, are discussed separately as well as their specificities regarding the ring-opening polymerization techniques, the mechanisms, the degree of control, the properties of the related polymers and their applications. The two last chapters are devoted to the implementation of green chemistry in ring-opening polymerization processes. Of much interest to chemists in academia and industry.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Modern Polyesters written by John Scheirs and published by John Wiley & Sons. This book was released on 2005-09-01 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of the family of polyester polymers which comprise an important group of plastics that span the range of commodity polymers to engineering resins. It describes the preparation, properties and applications of polyesters. Readers will also find details on polyester-based elastomers, biodegradable aliphatic polyester, liquid crystal polyesters and unsaturated polyesters for glass-reinforced composites. Presents an overview of the most recent developments. Explores synthesis, catalysts, processes, properties and applications. Looks at emerging polyester materials as well as existing ones. Written by foremost experts from both academia and industry, ensuring that both fundamentals and practical applications are covered.

Download or read book Polymer Science and Technology written by Premamoy Ghosh and published by . This book was released on 2011 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Absorbent Polymer Technology written by L. Brannon-Peppas and published by Elsevier. This book was released on 2012-12-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there has been a veritable explosion of research and development in consumer-oriented fields that utilize polymeric materials which absorb large amounts of water. These fields encompass the preparation, characterization and commercialization of separation systems, pharmaceutical and personal care products such as infant diapers, feminine products, incontinence products and many other related areas. The polymeric materials utilized in these applications are known as absorbent or superabsorbent materials because of their ability to swell rapidly and to retain large volumes of water, urine and other biological fluids.The aim of this book is to introduce the fundamentals of polymer structure and swelling as related to polymers used for these superabsorbent materials. In the field of absorbence, particular attention is given to crosslinked structures which swell to more than fifty times their initial weight in water or electrolytic solutions. The book also provides descriptions of novel applications of superabsorbent materials as well as a detailed analysis of water transport in crosslinked polymers.Absorbent Polymer Technology should be of interest to chemists, polymer scientists, chemical engineers, and industrial scientists working with swellable polymeric systems in personal care, pharmaceutical, agricultural waste treatment and separation industries.

Download or read book Radical Polymerization written by Michael Buback and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from the successful Macromolecular Symposia series presents the contributions from the IUPAC-sponsored International Symposium on "Radical Polymerization: Kinetics and Mechanism", held in Il Ciocco, Italy, in September, 2006. This was the fourth within the series of so-called SML conferences, which are the major scientific forum for addressing kinetic and mechanistic aspects of free-radical polymerization and controlled radical polymerization. SML IV again marked an important step forward toward the better understanding of the kinetics and mechanism of radical polymerization, which is extremely relevant for both conventional and controlled radical polymerization and for people in academia as well as in industry. Here, top international authors, such as K. Matyjaszewski, T. P. Davis and T. Fukuda, present their latest research. The five major themes covered were: Fundamentals of free-radical polymerization, heterogeneous polymerization, controlled radical polymerization, polymer reaction engineering, and polymer characterization.

Download or read book Plasma Polymerization written by H K Yasuda and published by Academic Press. This book was released on 2012-12-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymerization aims to bridge the conceptual gap between the academic and practical approaches to plasma polymerization and highlights the significance of plasma polymerization in materials science and technology. The major topics covered are gas-phase kinetics, ionization of gases, fundamentals of polymerization, mechanism of polymer formation in plasma, competitive aspects of polymer formation and ablation, mechanism of polymer deposition, operational factors of plasma polymerization, and electrical properties of plasma polymers. This book is comprised of 11 chapters and begins with a brief overview of plasma polymerization and its growing importance for the formation of entirely new kinds of materials. The discussion then shifts to a comparison between plasma-state polymerization and plasma-induced polymerization, between plasma polymerization and graft polymerization, and between plasma polymerization and radiation polymerization. The reader is also introduced to fundamental aspects of gas-phase reactions, paying particular attention to the classical kinetic theory of gas, as well as the mechanisms of formation of polymeric materials in plasma, competitive ablation and polymer formation in plasma, and polymer deposition in plasma polymerization. The operational parameters of plasma polymerization are described and a chapter devoted to the electrical properties of plasma-polymerized thin organic films concludes the book. This book will be of interest to students and researchers of material science.

Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.

Download or read book Polymer Process Engineering written by R. Griskey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are ubiquitous and pervasive in industry, science, and technology. These giant molecules have great significance not only in terms of products such as plastics, films, elastomers, fibers, adhesives, and coatings but also less ob viously though none the less importantly in many leading industries (aerospace, electronics, automotive, biomedical, etc.). Well over half the chemists and chem ical engineers who graduate in the United States will at some time work in the polymer industries. If the professionals working with polymers in the other in dustries are taken into account, the overall number swells to a much greater total. It is obvious that knowledge and understanding of polymers is essential for any engineer or scientist whose professional activities involve them with these macromolecules. Not too long ago, formal education relating to polymers was very limited, indeed, almost nonexistent. Speaking from a personal viewpoint, I can recall my first job after completing my Ph.D. The job with E.I. Du Pont de Nemours dealt with polymers, an area in which I had no university training. There were no courses in polymers offered at my alma mater. My experience, incidentally, was the rule and not the exception.

Download or read book Advances in Polymer Latex Technology written by Vikas Mittal and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The polymer latex technology by emulsion polymerisation offers significant advantages as compared to bulk and solution polymerisation technologies owing to the better control of heat and viscosity of the medium along with the possibility of increasing the molecular weight of the polymer chains without affecting the rate of polymerisation. These emulsion polymerisation methods have undergone significant advances in the recent years and now a days, synthesis of structured latexes with well defined morphologies and properties has been possible. The development of miniemulsion polymerisation has helped to polymerise very hydrophobic and very hydrophilic monomers, which otherwise are difficult to be polymerised with the conventional emulsion polymerisation. The combination of controlled living polymerisation methods like nitroxide mediated polymerisation, atom transfer radical polymerisation as well as reversible addition fragmentation chain transfer with the emulsion and miniemulsion polymerisation methods has resulted into the synthesis of functional block copolymer chains, graft copolymer chains and star or multi arm copolymer chains in the polymer particles. Apart from that, specific surface modifications on the surface of the emulsion particles have been achieved which have expended the area of application of such polymer particles. The kinetics and mechanism of particle generation with the living polymerisation in emulsion and miniemulsion are very complex, however, the recent advances have helped to understand these systems more clearly, thus, allowing to steer them to the advantage. Therefore, these recent advances in the latex technology need to be brought into a cumulative text in order to provide insight into the various possibilities of achieving the optimum latexes.

Download or read book Template Polymerization written by Stefan Polowinski and published by ChemTec Publishing. This book was released on 1997 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Template polymerization is a new field in polymer synthesis but common practice in the biosynthesis since DNA is the most popular template or matrix on which proteins are built by living species. This field is relevant to the synthesis of polymers of controlled structure but its application goes beyond the synthesis. Materials are formulated in complex mixtures always containing components which can be regarded as templates on which other materials are formed, modified, or are interacted with. In the new product development the relevance of these phenomena is controlled by the order of addition which affects probabilities and preferences of interaction. The current publication outlines mechanisms of template polymerization, polycondensation, and copolymerization. These mechanisms, illustrated with numerous examples, indicate a range of possibilities which can be encountered in materials and utilized to modify their properties. Orientation of substrates on template and their effect on modification of their reactivity and properties such as, for example, absorption of light or water are also discussed. Several chapters contain information on these studies discussed with sufficient detail to give reader comprehensive understanding of the methods used in various research laboratories and their findings."--Publisher's description.

Download or read book Aspen Plus written by Kamal I. M. Al-Malah and published by John Wiley & Sons. This book was released on 2022-10-12 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASPEN PLUS® Comprehensive resource covering Aspen Plus V12.1 and demonstrating how to implement the program in versatile chemical process industries Aspen Plus®: Chemical Engineering Applications facilitates the process of learning and later mastering Aspen Plus®, the market-leading chemical process modeling software, with step-by-step examples and succinct explanations. The text enables readers to identify solutions to various process engineering problems via screenshots of the Aspen Plus® platforms in parallel with the related text. To aid in information retention, the text includes end-of-chapter problems and term project problems, online exam and quiz problems for instructors that are parametrized (i.e., adjustable) so that each student will have a standalone version, and extra online material for students, such as Aspen Plus®-related files, that are used in the working tutorials throughout the entire textbook. The second edition of Aspen Plus®: Chemical Engineering Applications includes information on: Various new features that were embedded into Aspen Plus V12.1 and existing features which have been modified Aspen Custom Modeler (ACM), covering basic features to show how to merge customized models into Aspen Plus simulator New updates to process dynamics and control and process economic analysis since the first edition was published Vital areas of interest in relation to the software, such as polymerization, drug solubility, solids handling, safety measures, and energy saving For chemical engineering students and industry professionals, the second edition of Aspen Plus®: Chemical Engineering Applications is a key resource for understanding Aspen Plus and the new features that were added in version 12.1 of the software. Many supplementary learning resources help aid the reader with information retention.