Download or read book Cyber Physical Threat Intelligence for Critical Infrastructures Security written by John Soldatos and published by . This book was released on 2020-06-30 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern critical infrastructures comprise of many interconnected cyber and physical assets, and as such are large scale cyber-physical systems. Hence, the conventional approach of securing these infrastructures by addressing cyber security and physical security separately is no longer effective. Rather more integrated approaches that address the security of cyber and physical assets at the same time are required. This book presents integrated (i.e. cyber and physical) security approaches and technologies for the critical infrastructures that underpin our societies. Specifically, it introduces advanced techniques for threat detection, risk assessment and security information sharing, based on leading edge technologies like machine learning, security knowledge modelling, IoT security and distributed ledger infrastructures. Likewise, it presets how established security technologies like Security Information and Event Management (SIEM), pen-testing, vulnerability assessment and security data analytics can be used in the context of integrated Critical Infrastructure Protection. The novel methods and techniques of the book are exemplified in case studies involving critical infrastructures in four industrial sectors, namely finance, healthcare, energy and communications. The peculiarities of critical infrastructure protection in each one of these sectors is discussed and addressed based on sector-specific solutions. The advent of the fourth industrial revolution (Industry 4.0) is expected to increase the cyber-physical nature of critical infrastructures as well as their interconnection in the scope of sectorial and cross-sector value chains. Therefore, the demand for solutions that foster the interplay between cyber and physical security, and enable Cyber-Physical Threat Intelligence is likely to explode. In this book, we have shed light on the structure of such integrated security systems, as well as on the technologies that will underpin their operation. We hope that Security and Critical Infrastructure Protection stakeholders will find the book useful when planning their future security strategies.

Download or read book The Complete Guide to Cybersecurity Risks and Controls written by Anne Kohnke and published by CRC Press. This book was released on 2016-03-30 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complete Guide to Cybersecurity Risks and Controls presents the fundamental concepts of information and communication technology (ICT) governance and control. In this book, you will learn how to create a working, practical control structure that will ensure the ongoing, day-to-day trustworthiness of ICT systems and data. The book explains how to establish systematic control functions and timely reporting procedures within a standard organizational framework and how to build auditable trust into the routine assurance of ICT operations. The book is based on the belief that ICT operation is a strategic governance issue rather than a technical concern. With the exponential growth of security breaches and the increasing dependency on external business partners to achieve organizational success, the effective use of ICT governance and enterprise-wide frameworks to guide the implementation of integrated security controls are critical in order to mitigate data theft. Surprisingly, many organizations do not have formal processes or policies to protect their assets from internal or external threats. The ICT governance and control process establishes a complete and correct set of managerial and technical control behaviors that ensures reliable monitoring and control of ICT operations. The body of knowledge for doing that is explained in this text. This body of knowledge process applies to all operational aspects of ICT responsibilities ranging from upper management policy making and planning, all the way down to basic technology operation.

Download or read book The Complete Guide to Physical Security written by Paul R. Baker and published by CRC Press. This book was released on 2016-04-19 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creating a sound security plan involves understanding not only security requirements but also the dynamics of the marketplace, employee issues, and management goals. Emphasizing the marriage of technology and physical hardware, this volume covers intrusion detection, access control, and video surveillance systems-including networked video. It addresses the reasoning behind installations, how to work with contractors, and how to develop a central station for monitoring. It also discusses government regulations Case examples demonstrate the alignment of security program management techniques with not only the core physical security elements and technologies but also operational security practices.

Download or read book Information Security Risk Assessment Toolkit written by Mark Talabis and published by Newnes. This book was released on 2012-10-26 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to protect company's information assets such as sensitive customer records, health care records, etc., the security practitioner first needs to find out: what needs protected, what risks those assets are exposed to, what controls are in place to offset those risks, and where to focus attention for risk treatment. This is the true value and purpose of information security risk assessments. Effective risk assessments are meant to provide a defendable analysis of residual risk associated with your key assets so that risk treatment options can be explored. Information Security Risk Assessment Toolkit gives you the tools and skills to get a quick, reliable, and thorough risk assessment for key stakeholders. Based on authors' experiences of real-world assessments, reports, and presentations Focuses on implementing a process, rather than theory, that allows you to derive a quick and valuable assessment Includes a companion web site with spreadsheets you can utilize to create and maintain the risk assessment

Download or read book The Ultimate SFPC Study Guide Roadmap and Testbank written by J R Haseloff and published by . This book was released on 2019-05-23 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studying for SPeD's Security Fundamentals Professional Certification (SFPC) Certification can be tough. It encompasses a wide breadth of security topics including Information Security, Personnel Security, Physical Security, Industrial Security, and General Security.The SFPC provides a recognized and reliable indication of a security practitioner's understanding of foundational concepts, principles, and practices needed to successfully perform functions, implement programs, and pursue missions to protect DoD assets. The Security Fundamentals Professional Certification was accredited by NCCA in December 2012.But where do you start when studying for the Security Fundamentals Professional Certification?I've developed the Ultimate SFPC Study Guide to ensure you pass the SFPC Certification test on your first try! The Ultimate SFPC Study Guide takes you through all of the topics that will be covered on the test. It will give you some tips and tricks on how to answer some of the more difficult questions.It will also provide you an extensive test bank of questions so that you are familiar with the content of the questions, as well as the basic styles of questions that will be asked. I'll give you pointers on how to dwindle down answers to some of these tougher questions.

Download or read book Principles of Information Security written by Michael E. Whitman and published by Course Technology. This book was released on 2021-06-15 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest trends, developments and technology in information security with Whitman/Mattord's market-leading PRINCIPLES OF INFORMATION SECURITY, 7th Edition. Designed specifically to meet the needs of information systems students like you, this edition's balanced focus addresses all aspects of information security, rather than simply offering a technical control perspective. This overview explores important terms and examines what is needed to manage an effective information security program. A new module details incident response and detection strategies. In addition, current, relevant updates highlight the latest practices in security operations as well as legislative issues, information management toolsets, digital forensics and the most recent policies and guidelines that correspond to federal and international standards. MindTap digital resources offer interactive content to further strength your success as a business decision-maker.

Download or read book Legal Issues in Information Security written by Joanna Lyn Grama and published by Jones & Bartlett Publishers. This book was released on 2014-06-19 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated second edition addresses the area where law and information security concerns intersect. Information systems security and legal compliance are now required to protect critical governmental and corporate infrastructure, intellectual property created by individuals and organizations alike, and information that individuals believe should be protected from unreasonable intrusion. Organizations must build numerous information security and privacy responses into their daily operations to protect the business itself, fully meet legal requirements, and to meet the expectations of employees and customers. --

Download or read book Cyber Security written by David Sutton and published by BCS, The Chartered Institute for IT. This book was released on 2017-07-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive advertising and review coverage in the leading business and IT media, and direct mail campaigns targeting IT professionals, libraries, corporate customers and approximately 70,000 BCS members.

Download or read book Safety and Security of Cyber Physical Systems written by Frank J. Furrer and published by Springer Nature. This book was released on 2022-07-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber-physical systems (CPSs) consist of software-controlled computing devices communicating with each other and interacting with the physical world through sensors and actuators. Because most of the functionality of a CPS is implemented in software, the software is of crucial importance for the safety and security of the CPS. This book presents principle-based engineering for the development and operation of dependable software. The knowledge in this book addresses organizations that want to strengthen their methodologies to build safe and secure software for mission-critical cyber-physical systems. The book: • Presents a successful strategy for the management of vulnerabilities, threats, and failures in mission-critical cyber-physical systems; • Offers deep practical insight into principle-based software development (62 principles are introduced and cataloged into five categories: Business & organization, general principles, safety, security, and risk management principles); • Provides direct guidance on architecting and operating dependable cyber-physical systems for software managers and architects.

Download or read book Effective Physical Security written by Lawrence J. Fennelly and published by Butterworth-Heinemann. This book was released on 2016-11-25 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective Physical Security, Fifth Edition is a best-practices compendium that details the essential elements and latest developments in physical security protection. This new edition is completely updated, with new chapters carefully selected from the author's work that set the standard. This book contains important coverage of environmental design, security surveys, locks, lighting, and CCTV, the latest ISO standards for risk assessment and risk management, physical security planning, network systems infrastructure, and environmental design. - Provides detailed coverage of physical security in an easily accessible format - Presents information that should be required reading for ASIS International's Physical Security Professional (PSP) certification - Incorporates expert contributors in the field of physical security, while maintaining a consistent flow and style - Serves the needs of multiple audiences, as both a textbook and professional desk reference - Blends theory and practice, with a specific focus on today's global business and societal environment, and the associated security, safety, and asset protection challenges - Includes useful information on the various and many aids appearing in the book - Features terminology, references, websites, appendices to chapters, and checklists

Download or read book Applied Network Security Monitoring written by Chris Sanders and published by Elsevier. This book was released on 2013-11-26 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Network Security Monitoring is the essential guide to becoming an NSM analyst from the ground up. This book takes a fundamental approach to NSM, complete with dozens of real-world examples that teach you the key concepts of NSM. Network security monitoring is based on the principle that prevention eventually fails. In the current threat landscape, no matter how much you try, motivated attackers will eventually find their way into your network. At that point, it is your ability to detect and respond to that intrusion that can be the difference between a small incident and a major disaster. The book follows the three stages of the NSM cycle: collection, detection, and analysis. As you progress through each section, you will have access to insights from seasoned NSM professionals while being introduced to relevant, practical scenarios complete with sample data. If you've never performed NSM analysis, Applied Network Security Monitoring will give you an adequate grasp on the core concepts needed to become an effective analyst. If you are already a practicing analyst, this book will allow you to grow your analytic technique to make you more effective at your job. - Discusses the proper methods for data collection, and teaches you how to become a skilled NSM analyst - Provides thorough hands-on coverage of Snort, Suricata, Bro-IDS, SiLK, and Argus - Loaded with practical examples containing real PCAP files you can replay, and uses Security Onion for all its lab examples - Companion website includes up-to-date blogs from the authors about the latest developments in NSM

Download or read book Mobile Device Security written by Stephen Fried and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As each generation of portable electronic devices and storage media becomes smaller, higher in capacity, and easier to transport, it’s becoming increasingly difficult to protect the data on these devices while still enabling their productive use in the workplace. Explaining how mobile devices can create backdoor security threats, Mobile Device Security: A Comprehensive Guide to Securing Your Information in a Moving World specifies immediate actions you can take to defend against these threats. It begins by introducing and defining the concepts essential to understanding the security threats to contemporary mobile devices, and then takes readers through all the policy, process, and technology decisions that must be made to create an effective security strategy. Highlighting the risks inherent when mobilizing data, the text supplies a proven methodology for identifying, analyzing, and evaluating these risks. It examines the various methods used to store and transport mobile data and illustrates how the security of that data changes as it moves from place to place. Addressing the technical, operational, and compliance issues relevant to a comprehensive mobile security policy, the text:Provides methods for modeling the interaction between mobile data and mobile devices—detailing the advantages and disadvantages of eachExplains how to use encryption and access controls to protect your data Describes how to layer different technologies to create a resilient mobile data protection programProvides examples of effective mobile security policies and discusses the implications of different policy approachesHighlights the essential elements of a mobile security business case and provides examples of the information such proposals should containReviews the most common mobile device controls and discusses the options for implementing them in your mobile environmentSecuring your mobile data requires the proper balance between security, user acceptance, technology capabilities, and resource commitment. Supplying real-life examples and authoritative guidance, this complete resource walks you through the process of creating an effective mobile security program and provides the understanding required to develop a customized approach to securing your information.

Download or read book CISM Certified Information Security Manager All in One Exam Guide written by Peter H. Gregory and published by McGraw Hill Professional. This book was released on 2018-03-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. This effective study guide provides 100% coverage of every topic on the latest version of the CISM exam Written by an information security executive consultant, experienced author, and university instructor, this highly effective integrated self-study system enables you to take the challenging CISM exam with complete confidence. CISM Certified Information Security Manager All-in-One Exam Guide covers all four exam domains developed by ISACA. You’ll find learning objectives at the beginning of each chapter, exam tips, practice questions, and in-depth explanations. All questions closely match those on the live test in tone, format, and content. “Note,” “Tip,” and “Caution” sections throughout provide real-world insight and call out potentially harmful situations. Beyond fully preparing you for the exam, the book also serves as a valuable on-the-job reference. Covers all exam domains, including: • Information security governance • Information risk management • Information security program development and management • Information security incident management Electronic content includes: • 400 practice exam questions • Test engine that provides full-length practice exams and customizable quizzes by exam topic • Secured book PDF

Download or read book Design and Evaluation of Physical Protection Systems written by Mary Lynn Garcia and published by Elsevier. This book was released on 2007-09-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Evaluation of Physical Security Systems, Second Edition, includes updated references to security expectations and changes since 9/11. The threat chapter includes references to new threat capabilities in Weapons of Mass Destruction, and a new figure on hate crime groups in the US. All the technology chapters have been reviewed and updated to include technology in use since 2001, when the first edition was published. Garcia has also added a new chapter that shows how the methodology described in the book is applied in transportation systems. College faculty who have adopted this text have suggested improvements and these have been incorporated as well. This second edition also includes some references to the author's recent book on Vulnerability Assessment, to link the two volumes at a high level. - New chapter on transportation systems - Extensively updated chapter on threat definition - Major changes to response chapter

Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.

Download or read book Cybersecurity For Dummies written by Joseph Steinberg and published by John Wiley & Sons. This book was released on 2019-10-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protect your business and family against cyber attacks Cybersecurity is the protection against the unauthorized or criminal use of electronic data and the practice of ensuring the integrity, confidentiality, and availability of information. Being "cyber-secure" means that a person or organization has both protected itself against attacks by cyber criminals and other online scoundrels, and ensured that it has the ability to recover if it is attacked. If keeping your business or your family safe from cybersecurity threats is on your to-do list, Cybersecurity For Dummies will introduce you to the basics of becoming cyber-secure! You’ll learn what threats exist, and how to identify, protect against, detect, and respond to these threats, as well as how to recover if you have been breached! The who and why of cybersecurity threats Basic cybersecurity concepts What to do to be cyber-secure Cybersecurity careers What to think about to stay cybersecure in the future Now is the time to identify vulnerabilities that may make you a victim of cyber-crime — and to defend yourself before it is too late.

Download or read book Safety and Health for Engineers written by Roger L. Brauer and published by John Wiley & Sons. This book was released on 2022-08-18 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAFETY AND HEALTH FOR ENGINEERS A comprehensive resource for making products, facilities, processes, and operations safe for workers, users, and the public Ensuring the health and safety of individuals in the workplace is vital on an interpersonal level but is also crucial to limiting the liability of companies in the event of an onsite injury. The Bureau of Labor Statistics reported over 4,700 fatal work injuries in the United States in 2020, most frequently in transportation-related incidents. The same year, approximately 2.7 million workplace injuries and illnesses were reported by private industry employers. According to the National Safety Council, the cost in lost wages, productivity, medical and administrative costs is close to 1.2 trillion dollars in the US alone. It is imperative—by law and ethics—for engineers and safety and health professionals to drive down these statistics by creating a safe workplace and safe products, as well as maintaining a safe environment. Safety and Health for Engineers is considered the gold standard for engineers in all specialties, teaching an understanding of many components necessary to achieve safe workplaces, products, facilities, and methods to secure safety for workers, users, and the public. Each chapter offers information relevant to help safety professionals and engineers in the achievement of the first canon of professional ethics: to protect the health, safety, and welfare of the public. The textbook examines the fundamentals of safety, legal aspects, hazard recognition and control, the human element, and techniques to manage safety decisions. In doing so, it covers the primary safety essentials necessary for certification examinations for practitioners. Readers of the fourth edition of Safety and Health for Engineers readers will also find: Updates to all chapters, informed by research and references gathered since the last publication The most up-to-date information on current policy, certifications, regulations, agency standards, and the impact of new technologies, such as wearable technology, automation in transportation, and artificial intelligence New international information, including U.S. and foreign standards agencies, professional societies, and other organizations worldwide Expanded sections with real-world applications, exercises, and 164 case studies An extensive list of references to help readers find more detail on chapter contents A solution manual available to qualified instructors Safety and Health for Engineers is an ideal textbook for courses in safety engineering around the world in undergraduate or graduate studies, or in professional development learning. It also is a useful reference for professionals in engineering, safety, health, and associated fields who are preparing for credentialing examinations in safety and health.