Download or read book Permeability Properties of Plastics and Elastomers 2nd Ed written by Liesl K. Massey and published by Cambridge University Press. This book was released on 2003 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised and updated second edition of the only data handbook available on the properties of commercial polymeric films details the permeability characteristics of over 125 major plastic and elastomer packaging materials. New to this edition are 92 resin chapters containing textual summary information including: category, general description, processing methods, applications, and general permeability considerations for water vapor, oxygen, and other gases including aroma and flavor. The product data is presented in graphical and tabular format, retaining the familiar format of the first edition and allowing easy comparison between materials and test conditions.
Download or read book Permeability Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2011-09-28 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Permeability properties of plastics and elastomers / Massey, Liesl K. c2003. 2nd ed.
Download or read book Permeability Properties of Plastics and Elastomers written by Liesl K. Massey and published by William Andrew. This book was released on 2003-01-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised and updated second edition of the only data handbook available on the properties of commercial polymeric films details the permeability characteristics of over 125 major plastic and elastomer packaging materials. New to this edition are 92 resin chapters containing textual summary information including: category, general description, processing methods, applications, and general permeability considerations for water vapor, oxygen, and other gases including aroma and flavor. The product data is presented in graphical and tabular format, retaining the familiar format of the first edition and allowing easy comparison between materials and test conditions.
Download or read book Film Properties of Plastics and Elastomers 2nd Edition written by Laurence W. McKeen and published by William Andrew. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised and updated second edition of the only data handbook available on the engineering properties of commercial polymeric films details many physical, mechanical, optical, electrical, and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in the same family as well as materials in different families. Data are presented on the characteristics of 47 major plastic and elastomer packaging materials. New to this edition, the resin chapters each contain textual summary information including category, general description, processing methods, applications, and other facts as appropriate, such as reliability, weatherability, and regulatory approval considerations for use in food and medical packaging. Extensive references are provided. The resin chapter material supplier trade name product data are presented in graphical and tabular format, with results normalized to SI units, retaining the familiar format of the 1st edition and allowing easy comparison between materials and test conditions.
Download or read book Film Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2017-06-16 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Film Properties of Plastics and Elastomers, Fourth Edition is the only data handbook available on the engineering properties of commercial polymeric films. It details many physical, mechanical, optical, electrical and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in both the same and different families. Data is presented on the characteristics of major plastic and elastomer packaging materials, with the data in this edition updated to cover the five years since the previous edition was published. The resin chapters each contain textual summary information, including category, general description, processing methods, applications, reliability, weatherability, and regulatory approval considerations for use in food and medical packaging. Provides an essential reference tool for the workflow of engineers and scientists involved in the plastics industry Details a broad range of film properties, enabling engineers and professionals to compare and select materials Provides a life-of-product approach, with coverage ranging from properties and key concepts, through to production and applications
Download or read book Permeability and Other Film Properties of Plastics and Elastomers written by and published by . This book was released on 1995 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a database reference ranging in coverage from the barrier and film properties of plastics and elastomers to detailed discussions and test results. Data presented details the differences in permeation between generic families of plastic and rubber materials. Also covered are differences within the same generic family due to environmental factors like temperature and humidity or material characteristics, such as sample preparation and material composition. This data serves as an indication of how one material is likely to behave relative to another material or relative to the same material exposed under different conditions. This includes details of test methods, test conditions, penetrant, sample size, material composition and other factors.
Download or read book Film Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2012-04-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- 1. Introduction to Plastics and Polymers -- 2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers -- 3. Production of films -- 4. Markets and Applications for films -- 5. Styrenic Plastics -- 6. Polyesters -- 8. Polyamides (Nylons) -- 9. Polyolefins -- 10. Polyvinyls & Acrylics -- 11. Fluoropolymers -- 12. High Temperature/High Performance Polymers -- 13. Elastomers and rubbers -- 14. Renewable Resource or biodegradable polymers -- Appendices -- Permeation Unit Conversion Factors -- Vapor Transmission rate Conversion factors.
Download or read book Food Packaging written by Gordon L. Robertson and published by CRC Press. This book was released on 2005-09-22 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible textbook, Food Packaging: Principles and Practice, Second Edition presents an integrated approach to understanding the principles underlying food packaging and their applications. Integrating concepts from chemistry, microbiology, and engineering, it continues in the fine tradition of its bestselling predecessor - and has been completely updated to include new, updated, and expanded content. The author divides the book's subject matter into five parts for ease-of-use. The first part addresses the manufacture, properties, and forms of packaging materials, placing emphasis on those properties that influence the quality and shelf life of food. The second part then details the various types of deteriorative reactions that foods undergo, examines the extrinsic factors controlling their reaction rates, and discusses specific factors influencing shelf life and the methodology used to estimate that shelf life. Chapters on the aseptic packaging of foods, active and intelligent packaging, modified atmosphere packaging, and microwavable food packaging are explored in the third part, while the fourth part describes packaging requirements of the major food groups. The final section examines the safety and legislative aspects of food packaging. The book also includes over 300 industry abbreviations, acronyms, and symbols, and an expansive index. What's New in the Second Edition: Includes five new chapters and diagrams that explain recent developments in packaging materials and processes Provides the latest information on new and active packaging technologies Presents new, updated, and expanded references Adhering to the highly organized format that made the first edition so straightforward and informative, this latest edition of Food Packaging: Principles and Practice presents students with the most essential and cutting-edge information available. The author maintains a website with more information.
Download or read book Effect of Temperature and other Factors on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2008-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an update to the first edition compiled and published in 1990 by William Woishnis. A lot has changed in the field since 1990 and a lot has not changed. There are new plastic materials. There has been a huge turnover in ownership of plastics producing companies. There has been a lot of consolidation, which of course means discontinued products. Thus, this update is much more extensive than the usual "next edition."It has been reorganized from a chemistry point of view. Plastics of similar polymer types are grouped into nine chapters. Each of these chapters includes an introduction with a brief explanation of the chemistry of the polymers used in the plastics.An extensive first chapter has been added as an introduction that summarizes the chemistry of making polymers, the formulation of plastics, testing and test methods, and plastic selection.Most plastic products and parts are expected to be used in environments other than room temperature and standard humidity conditions. Chapters 2-10 are a databank that serves as an evaluation of plastics as they are exposed to varying operating conditions at different temperatures, humidity, and other factors. Over 900 graphs for more than 45 generic families of plastics are contained in these chapters.Chapter 11 contains extensive mechanical and electrical data in tabular form. The tables contain data on several thousand plastics. Similarly, Chapter 12 contains thermal data on several thousand plastics. Data from the first edition have only been removed if those products were discontinued, and many products were. Product names and manufacturers have been updated. Detailed introductions of plastics properties, testing procedures, and principles of plastics design The only "databook" available on the effects of temperature and humidity conditions on plastics and elastomers More than 1,000 graphs and tables allow for easy comparison between products Covers more than 70 types of plastics, and summarizes the chemistry of each type
Download or read book Handbook of Plastics Joining written by Michael J. Troughton and published by William Andrew. This book was released on 2008-10-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this bestselling reference provides fully updated and detailed descriptions of plastics joining processes, plus an extensive compilation of data on joining specific materials. The volume is divided into two main parts: processes and materials. The processing section has 18 chapters, each explaining a different joining technique. The materials section has joining information for 25 generic polymer families. Both sections contain data organized according to the joining methods used for that material. A significant and extensive update from experts at The Welding Institute A systematic approach to discussing each joining method including: process, advantages and disadvantages, applications, materials, equipment, joint design, and welding parameters Includes international suppliers’ directory and glossary of key joining terms Includes new techniques such as flash free welding and friction stir welding Covers thermoplastics, thermosets, elastomers, and rubbers.
Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison Provides essential information and guidance for FDA submissions required for new medical devices
Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries
Download or read book Compounding Precipitated Silica in Elastomers written by Norman Hewitt and published by William Andrew. This book was released on 2007-04-24 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable guide to compounding elastomers with precipitated silica covers principles, properties, mixing, testing and formulations from a practical perspective. This handbook and reference manual will serve those who work on part design, elastomer formulation, manufacturing and applications of elastomers. Ample discussion of compound specifications adds to the usefulness of this book to practitioners. Comparisons of carbon black and silica compounds throughout the book allow readers to select the most suitable formulation for applications ranging from tires to electrical insulation to shoe soles. The author has over forty years of experience in the rubber industry highlighted by his 39 years at the PPG Rubber Research laboratories. A highlight of the book is the inclusion of studies conducted by the author which greatly adds to the richness of the contents.
Download or read book The Effect of UV Light and Weather written by Liesl K. Massey and published by William Andrew. This book was released on 2006-09-07 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated, comprehensive databook was created for design and application engineers, scientists, and material producer technical support and research and development personnel. Important weathering characteristics and material properties of plastics and elastomers are presented in discussion, tabular and graphical sections. It provides a ready reference for comparing materials in the same family as well as materials in different families. Data are presented on 80 major plastic and elastomer materials, including biodegradable or organic polymers. New to this edition, the resin chapters each contain textual summary information including category, general description, and weathering properties detailing information of the material's susceptibility or immunity to weathering including discussion of test results. Extensive references are provided. The resin chapter material supplier trade name product data are presented in graphical and tabular format, with results normalized to SI units, retaining the familiar format of the 1st edition and allowing easy comparison between materials and test conditions.
Download or read book Essential Rubber Formulary Formulas for Practitioners written by Chellappa Chandrasekaran and published by William Andrew. This book was released on 2007-03-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author, a seasoned rubber technologist of four decades, provides more than 180 essential rubber formularies, some of which have never been published, that are used by practitioners the world over on a frequent basis. A special feature of the formulations is that they are designed for factory scale applications. The opening chapter of this indispensable book gives practical information on compounding techniques, coloring, ingredients, as well as a whole section on typical rubber testing methods. The book concludes with appendices useful for the technologist that include seven conversion tables and three tables on scorching of rubber, specific gravity and volume cost, equivalent chemical names for trade names. Designing a rubber formula on the factory floor demands knowledge of the whole undertaking, such as the physical nature of ingredients, the interaction of additives and the base rubber during compounding and processing, as well as making sure that the finished product conforms to specification and requirements. This book provides all the necessary knowledge for practitioners and students alike.
Download or read book Fluoroelastomers Handbook written by Albert L. Moore and published by Taylor & Francis. This book was released on 2006-01-14 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a must-have reference for materials scientists and engineers in the automotive, aerospace, chemical, chemical process, and power generation industries. Fluoroelastomers are growing as products of choice for critical components such as O-rings, hoses and seals in hostile fluid and temperature conditions.
Download or read book Fluorinated Ionomers written by Walther Grot and published by William Andrew. This book was released on 2011-08-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- History -- Manufacture -- Properties -- Applications -- Fuel cells and batteries -- Commercial membrane types -- Economic aspects -- Experimental methods -- Heat sealing and repair -- Handling, storage and installation -- Toxicology, safety, and disposal -- Appendices.
