Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. - Quickly become familiar with the oil and gas offshore industry, including deepwater operations - Understand the full spectrum of the business, including environmental impacts and future challenges - Gain knowledge and exposure on critical standards and real-world case studies
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Global Oil and Gas Industry written by Andrew C. Inkpen and published by . This book was released on 2016 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Profile of the Oil and Gas Industry written by Linda Herkenhoff and published by Business Expert Press. This book was released on 2013-11-30 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas are important to every aspect of our economy, yet the oil and gas industry is distinguished by its combination of increasing demands and decreasing discovery volumes--and it is an industry shrouded in an environment of extremely volatile pricing. Although the profits enjoyed by the oil and gas industry are enormous, the industry remains one of the most capital-intensive in a world where rising expenses continue to threaten to squeeze profit margins. Geopolitics may continue to be the most important variable in maintaining existing assets and in successfully achieving new discoveries and carrying out their subsequent development. But finding new oil and gas reserves is becoming more challenging and the places where hydrocarbons are being found are more remote. Thus technology advances are also a key variable to enable exploration, drilling and development to become economically feasible in some of these more difficult operating environments. For the last century oil and gas additions have exceeded demand but has this industry now reached a "peak oil" situation? Some experts argue we are on the cusp of maximum oil production while others suggest we are still about a decade away. Natural gas demand however, is rising at a slightly faster rate than oil. Natural gas may be the immediate replacement fuel for oil as a source of clean and efficient electric power generation. Three out of the top ten Fortune 500 companies were oil/gas companies in 2011. This short introduction to the oil and gas industry will focus on history, operations, major companies, outside market forces, regulation and the current challenges the industry faces. Such factors as finite natural resources, the environment, economics, geopolitics, and technology will all come into play in the narrative. The book will demonstrate how the leaders of this industry, former champions of progress, are now coming under scrutiny and being depicted as the biggest culprits of environmental degradation. Yet the industry is likely to continue to grow until some form of alternate fuels is developed. The oil and gas industry will continue to have an enormous impact on life on the planet.
Download or read book Integrated Operations in the Oil and Gas Industry Sustainability and Capability Development written by Rosendahl, Tom and published by IGI Global. This book was released on 2012-08-31 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The predicted ICT revolution has gained increasing attention in the oil industry the last few years. It is enabled by the use of ubiquitous real time data, collaborative techniques, and multiple expertises across disciplines, organizations and geographical locations. Integrated Operations in the Oil and Gas Industry: Sustainability and Capability Development covers the capability approach to integrated operations that documents research and development in the oil industry. By capability, we refer to the combined capacity and ability to plan and execute in accordance with business objectives through a designed combination of human skills, work processes, organizational change, and technology. This book will serve as a knowledge base for those who are interested in learning about, and those involved in, Integrated Operations in the Oil and Gas Industry.
Download or read book Project Management for the Oil and Gas Industry written by Adedeji B. Badiru and published by CRC Press. This book was released on 2016-04-19 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project management for oil and gas projects comes with a unique set of challenges that include the management of science, technology, and engineering aspects. Underlining the specific issues involved in projects in this field, Project Management for the Oil and Gas Industry: A World System Approach presents step-by-step application of project manag
Download or read book Risk Management in the Oil and Gas Industry written by Gerardo Portela Da Ponte Jr and published by Gulf Professional Publishing. This book was released on 2021-06-09 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Management in the Oil and Gas Industry: Offshore and Onshore Concepts and Case Studies delivers the concepts, strategies and good practices of offshore and onshore safety engineering that are applicable to petroleum engineering and immediately surrounding industries. Guided by the strategic risk management line, this reference organizes steps in order of importance and priority that should be given to the themes in the practical exercise of risk management activities, from the conceptual and design phase to operational and crisis management situations. Each chapter is packed with practical case studies, lessons learned, exercises, and review questions. The reference also touches on the newest techniques, including liquefied natural gas (cryogenics) operations and computer simulations that contemplate the influence of human behavior. Critical for both the new and experienced engineer, this book gives the best didactic tool to perform operations safely and effectively. - Helps readers by presenting practical case studies and exercises that are included in every chapter - Presents an understanding on how to approach and apply best practices specific to the oil and gas industry, both offshore and onshore - Provides the knowledge needed to gain new techniques in computer simulation and human factors to apply to various sectors of the industry, including subsea and refineries
Download or read book Essentials of Oil and Gas Utilities written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2016-02-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every oil and gas refinery or petrochemical plant requires sufficient utilities support in order to maintain a successful operation. A comprehensive utilities complex must exist to distribute feedstocks, discharge waste streams, and remains an integrated part of the refinery's infrastructure. Essentials of Oil and Gas Utilities explains these support systems and provides essential information on their essential requirements and process design. This guide includes water treatment plants, condensate recovery plants, high pressure steam boilers, induced draft cooling towers, instrumentation/plant air compressors, and units for a refinery fuel gas and oil systems. In addition, the book offers recommendations for equipment and flow line protection against temperature fluctuations and the proper preparation and storage of strong and dilute caustic solutions. Essentials of Oil and Gas Utilities is a go-to resource for engineers and refinery personnel who must consider utility system design parameters and associated processes for the successful operations of their plants. - Discusses gaseous and liquid fuel systems used to provide heat for power generation, steam production and process requirements - Provides a design guide for compressed air systems used to provide air to the various points of application in sufficient quantity and quality and with adequate pressure for efficient operation of air tools or other pneumatic devices. - Explains the water systems utilized in plant operations which include water treatment systems or raw water and plant water system; cooling water circuits for internal combustion engines, reciprocating compressors, inter- cooling and after-cooling facilities; and "Hot Oil" and "Tempered Water" systems
Download or read book Applied Operational Excellence for the Oil Gas and Process Industries written by Dennis P. Nolan and published by Gulf Professional Publishing. This book was released on 2015-08-13 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Operational Excellence for the Oil, Gas, and Process Industries offers a straightforward practical guide for oil and gas companies to understand the comparisons and contrasts between various types of safety management processes, including the standardized structure and ongoing extended benefits that operational excellence can bring to an oil and gas company. The goal of achieving operational excellence is to reduce costs, improve productivity, and enhance efficiency—in other words, operational excellence contributes to the bottom line. Following along with pre-built success in the process industries, many companies in the oil and gas industry appear to use a subset form of operational excellence, yet many are unsure or unaware of all the safety system components that will truly benefit the company holistically, and current literature is only applicable to the process and manufacturing industries. Packed with clear objectives and tools, structure guidelines specific to oil and gas, and guidance for how to imbed your existing safety program under the operational excellence umbrella known as "One-Step Merger," this book will help you establish an overall safety culture vision and challenge your organization to achieve higher levels of safety management and overall company value. - Explores how to solidify a foundational operational excellence program applicable for your oil and gas company - Clarifies the differences and benefits among various programs under operational excellence (OE), such as SHE (safety, health, and environment), PSM (process safety management), and SMS (safety management system) - Explains how to audit and consistently assess how oil and gas OE systems are planned, implemented, and managed, with explanations on cost and time impacts as well as administrative protocols - Includes a glossary, acronym appendix, and additional references for further reading
Download or read book Machine Learning and Data Science in the Oil and Gas Industry written by Patrick Bangert and published by Gulf Professional Publishing. This book was released on 2021-03-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Learning and Data Science in the Oil and Gas Industry explains how machine learning can be specifically tailored to oil and gas use cases. Petroleum engineers will learn when to use machine learning, how it is already used in oil and gas operations, and how to manage the data stream moving forward. Practical in its approach, the book explains all aspects of a data science or machine learning project, including the managerial parts of it that are so often the cause for failure. Several real-life case studies round out the book with topics such as predictive maintenance, soft sensing, and forecasting. Viewed as a guide book, this manual will lead a practitioner through the journey of a data science project in the oil and gas industry circumventing the pitfalls and articulating the business value. - Chart an overview of the techniques and tools of machine learning including all the non-technological aspects necessary to be successful - Gain practical understanding of machine learning used in oil and gas operations through contributed case studies - Learn change management skills that will help gain confidence in pursuing the technology - Understand the workflow of a full-scale project and where machine learning benefits (and where it does not)
Download or read book Operational Aspects of Oil and Gas Well Testing written by S. McAleese and published by Elsevier. This book was released on 2000-03-10 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Testing is recognised by many operating oil and gas companies to be the most hazardous operation they routinely undertake. Therefore, it is of great importance that such operations are extremely well planned and executed.This handbook covers all the major "Operational Aspects of Oil and Gas Well Testing" and uses a structured approach to guide the reader through the steps required to safely and effectively plan a well test operation under just about any circumstances world wide.Safety procedures and well testing recommended practices are rigorously addressed in this book, as are the responsibilities of those persons involved in well testing operations.Perforating equipment, drill stem test equipment and bottom hole pressure gauges are discussed in detail in the book. There is also a very valuable section on sub sea equipment, an area often not well understood even by experienced engineers who may have been primarily involved with land or jackup rigs.A major part of the book is the detailed coverage of the equipment and instrumentation that makes up a surface well testing package. It also covers operational and testing related problems such as, hydrates, wax and sand, and offers the reader some possible solutions.There are useful chapters on sampling, onsite chemistry, coil tubing and nitrogen operations and basic stimulation as they relate to well testing. Finally there is an extensive section of appendices covering useful engineering calculations and there is a complete example of a detailed well testing programme.
Download or read book Standard Handbook of Petroleum Natural Gas Engineering written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents the mathematics and general engineering and science of petroleum engineering. It also examines the auxiliary equipment and provides coverage of all aspects of drilling and well completion.
Download or read book Optimization and Business Improvement Studies in Upstream Oil and Gas Industry written by Sanjib Chowdhury and published by John Wiley & Sons. This book was released on 2016-08-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delves into the core and functional areas in the upstream oil and gas industry covering a wide range of operations and processes Oil and gas exploration and production (E&P) activities are costly, risky and technology-intensive. With the rise in global demand for oil and fast depletion of easy reserves, the search for oil is directed to more difficult areas – deepwater, arctic region, hostile terrains; and future production is expected to come from increasingly difficult reserves – deeper horizon, low quality crude. All these are making E&P activities even more challenging in terms of operations, technology, cost and risk. Therefore, it is necessary to use scarce resources judiciously and optimize strategies, cost and capital, and improve business performance in all spheres of E&P business. Optimization and Business Improvement Studies in Upstream Oil and Gas Industry contains eleven real-life optimization and business improvement studies that delve into the core E&P activities and functional areas covering a wide range of operations and processes. It uses various quantitative and qualitative techniques, such as Linear Programing, Queuing theory, Critical Path Analysis, Economic analysis, Best Practices Benchmark, Business Process Simplification etc. to optimize Productivity of drilling operations Controllable rig time loss Deepwater exploration strategy Rig move time and activity schedule Offshore supply vessel fleet size Supply chain management system Strategic workforce and human resource productivity Base oil price for a country Standardize consumption of materials Develop uniform safety standards for offshore installations Improve organizational efficiency through business process simplification The book will be of immense interest to practicing managers, professionals and employees at all levels/ disciplines in oil and gas industry. It will also be useful to academicians, scholars, educational institutes, energy research institutes, and consultants dealing with oil and gas. The work can be used as a practical guide to upstream professionals and students in petroleum engineering programs.
Download or read book Project Management in the Oil and Gas Industry written by Mohamed A. El-Reedy and published by John Wiley & Sons. This book was released on 2016-02-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas projects have special characteristics that need a different technique in project management. The development of any country depends on the development of the energy reserve through investing in oil and gas projects through onshore and offshore exploration, drilling, and increasing facility capacities. Therefore, these projects need a sort of management match with their characteristics, and project management is the main tool to achieving a successful project. Written by a veteran project manager who has specialized in oil and gas projects for years, this book focuses on using practical tools and methods that are widely and successfully used in project management for oil and gas projects. Most engineers study all subjects, but focus on project management in housing projects, administration projects, and commercial buildings or other similar projects. However, oil and gas projects have their own requirements and characteristics in management from the owners, engineering offices, and contractors’ side. Not only useful to graduating engineers, new hires, and students, this volume is also an invaluable addition to any veteran project manager’s library as a reference or a helpful go-to guide. Also meant to be a refresher for practicing engineers, it covers all of the project management subjects from an industrial point of view specifically for petroleum projects, making it the perfect desktop manual. Not just for project managers and students, this book is helpful to any engineering discipline or staff in sharing or applying the work of a petroleum project and is a must-have for anyone working in this industry.
Download or read book Fundamentals of Investing in Oil and Gas written by Chris Termeer and published by Chris Termeer. This book was released on 2013 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book is to educate the reader about the vast complexities of the oil and gas industry and to motivate involvement in domestic oil and gas development, production and refinement. Explains the industry in non-technical language for an average person.
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Expanders for Oil and Gas Operations written by Murari Singh and published by McGraw Hill Professional. This book was released on 2014-05-29 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective methods for recovering gas energy using expanders Expanders for Oil and Gas Operations offers in-depth details on different types of expanders, addressing the background, mechanical design features, design and operating requirements, operational processes, and potential problems for each class of expander. The book also discusses rotor dynamics, vibration theory, material strength, life estimation, and probabilistic analysis. The information in this practical, illustrated resource will help you to maintain and improve existing expanders and implement design enhancements for increased expander capacity as well as lifespan and maximum energy reuse. Comprehensive coverage includes: CCU hot gas expanders Nitric acid expanders for chemical applications Turboexpanders/cryogenic turboexpanders Rotor dynamics Bladed disk vibration and reliability Damage in material and life analysis Probabilistic concept and risk assessment
