Download or read book Advanced Control of Turbofan Engines written by Hanz Richter and published by Springer Science & Business Media. This book was released on 2011-10-20 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control of Turbofan Engines describes the operational performance requirements of turbofan (commercial) engines from a controls systems perspective, covering industry-standard methods and research-edge advances. This book allows the reader to design controllers and produce realistic simulations using public-domain software like CMAPSS: Commercial Modular Aero-Propulsion System Simulation, whose versions are released to the public by NASA. The scope of the book is centered on the design of thrust controllers for both steady flight and transient maneuvers. Classical control theory is not dwelled on, but instead an introduction to general undergraduate control techniques is provided. Advanced Control of Turbofan Engines is ideal for graduate students doing research in aircraft engine control and non-aerospace oriented control engineers who need an introduction to the field.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Alfonso Fernandez Del Rincon and published by Springer. This book was released on 2019-02-07 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Download or read book Sliding Mode Control written by C Edwards and published by CRC Press. This book was released on 1998-08-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the formation of any control problem there will be discrepancies between the actual plant and the mathematical model for controller design. Sliding mode control theory seeks to produce controllers to over some such mismatches. This text provides the reader with a grounding in sliding mode control and is appropriate for the graduate with a basic knowledge of classical control theory and some knowledge of state-space methods. From this basis, more advanced theoretical results are developed. Two industrial case studies, which present the results of sliding mode controller implementations, are used to illustrate the successful practical application theory.
Download or read book Advances and Applications in Sliding Mode Control systems written by Ahmad Taher Azar and published by Springer. This book was released on 2014-11-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the advances and applications in Sliding mode control (SMC) which is widely used as a powerful method to tackle uncertain nonlinear systems. The book is organized into 21 chapters which have been organised by the editors to reflect the various themes of sliding mode control. The book provides the reader with a broad range of material from first principles up to the current state of the art in the area of SMC and observation presented in a clear, matter-of-fact style. As such it is appropriate for graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems. The resulting design procedures are emphasized using Matlab/Simulink software.
Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book NASA SP written by and published by . This book was released on 1990 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sliding Mode Control and Observation written by Yuri Shtessel and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control methodology has proven effective in dealing with complex dynamical systems affected by disturbances, uncertainties and unmodeled dynamics. Robust control technology based on this methodology has been applied to many real-world problems, especially in the areas of aerospace control, electric power systems, electromechanical systems, and robotics. Sliding Mode Control and Observation represents the first textbook that starts with classical sliding mode control techniques and progresses toward newly developed higher-order sliding mode control and observation algorithms and their applications. The present volume addresses a range of sliding mode control issues, including: *Conventional sliding mode controller and observer design *Second-order sliding mode controllers and differentiators *Frequency domain analysis of conventional and second-order sliding mode controllers *Higher-order sliding mode controllers and differentiators *Higher-order sliding mode observers *Sliding mode disturbance observer based control *Numerous applications, including reusable launch vehicle and satellite formation control, blood glucose regulation, and car steering control are used as case studies Sliding Mode Control and Observation is aimed at graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems, while being of interest to a wider audience of graduate students in electrical/mechanical/aerospace engineering and applied mathematics, as well as researchers in electrical, computer, chemical, civil, mechanical, aeronautical, and industrial engineering, applied mathematicians, control engineers, and physicists. Sliding Mode Control and Observation provides the necessary tools for graduate students, researchers and engineers to robustly control complex and uncertain nonlinear dynamical systems. Exercises provided at the end of each chapter make this an ideal text for an advanced course taught in control theory.
Download or read book CAD 3D Modeling Engineering Analysis and Prototype Experimentation written by Jeremy Zheng Li and published by Springer. This book was released on 2014-08-26 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products. These efficient tools, deployed for R&D in the laboratory and the field, perform efficiently three-dimensional modeling of finished products, render complex geometrical product designs, facilitate structural analysis and optimal product design, produce graphic and engineering drawings, and generate production documentation. Written with an eye toward green energy installations and novel manufacturing facilities, this concise volume enables scientific researchers and engineering professionals to learn design techniques, control existing and complex issues, proficiently use CAD tools, visualize technical fundamentals, and gain analytic and technical skills. This book also: · Equips practitioners and researchers to handle powerful tools for engineering design and analysis using many detailed illustrations · Emphasizes important engineering design principles in introducing readers to a range of techniques · Includes tutorials providing readers with appropriate scaffolding to accelerate their learning process · Adopts a product development, cost-consideration perspective through the book’s many examples
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Variable Structure Systems Sliding Mode and Nonlinear Control written by K.D. Young and published by Springer. This book was released on 2007-10-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of papers that were first presented at VSS98 (5th International Workshop on Variable Structure Systems) held in Sarasota, Florida. This workshop was the fifth in a series of VSS international workshops, and the first to be held in the United States. Work presented herein on theoretical developments and applications on VSS and Sliding Mode, reflects how trends have advanced beyond the original ideas that are now well documented in a number of books and research monographs. In particular, the concepts of Sliding Sector and Second Order Sliding Mode introduced in this volume, will stimulate discussions and invite further extensions. Also, the focus on Sampled Data systems represents a positive trend towards practical industrial implementations of sliding mode controllers.
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sliding Mode Control In Engineering written by Wilfrid Perruquetti and published by CRC Press. This book was released on 2002-01-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the most recent developments in the theory of non-Archimedean pseudo-differential equations and its application to stochastics and mathematical physics--offering current methods of construction for stochastic processes in the field of p-adic numbers and related structures. Develops a new theory for parabolic equat
Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer. This book was released on 1990-09-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Aircraft Engine Controls written by Link C. Jaw and published by AIAA Education. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of engine control systems -- Engine modeling and simulation -- Model reduction and dynamic analysis -- Design of set-point controllers -- Design of transient and limit controllers -- Control system integration -- Advanced control concepts -- Engine monitoring and health management -- Integrated control and health monitoring -- Appendix A. Fundamentals of automatic control systems -- Appendix B. Gas turbine engine performance and operability.
