Download or read book Micro turbine Generators written by M. J. Moore and published by John Wiley & Sons. This book was released on 2005-04-22 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, modern precision manufacturing techniques and design methods have substantially improved the performance of micro-turbine generators (MTG). Compared to conventional generators, micro-turbine power sources are much smaller and portable. Microturbine generators are also proving to be more efficient, easier to maintain, and more environmentally friendly with fewer emissions. Although power generators running on microturbines can use various types of energy sources, Micro-turbine Generators brings together a wide range of engineering experience to describe the emergence of micro-turbine technology, its viability and its future potential. COMPLETE CONTENTS: Foreword An introduction to micro-turbine generators Micro-turbine generators – next generation Analysis of micro- and mini-turbine competitive and supply markets in Europe Future potential developments of micro-turbine generators – hybrid cycles and tri-generation Design reliability of micro-turbines Field experience with micro-turbines in Canada Design problems in micro-turbine generators Tip-leakage flow: A comparison between axial and radial turbines
Download or read book Distributed Power Generation written by H. Lee Willis and published by CRC Press. This book was released on 2018-10-03 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the view of many power experts, distributed power generation represents the paradigm of the future. Distributed Power Generation: Planning and Evaluation explores the preparation and analysis of distributed generators (DGs) for residential, commercial and industrial, as well as electric utility applications. It examines distributed generation versus traditional, centralized power systems, power demands, reliability evaluation, planning processes, costs, reciprocating piston engine DGs, gas turbine powered DGs, fuel cell powered DGs, renewable resource DGs, and more. The authors include recommendations and guidelines for DG planners, and numerous case studies illustrate the discussions.
Download or read book Power Generation Technologies written by Paul Breeze and published by Elsevier. This book was released on 2005-02-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form.Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies.Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses.· Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable· Describes the workings and environmental impact of each technology· Evaluates the economic viability of each different power generation system
Download or read book Motors as Generators for Micro Hydro Power written by Nigel Smith and published by . This book was released on 2008 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to the use of induction motors for electricity generation in remote locations. It is written as a practical handbook for engineers and technicians involved in designing and installing small water-power schemes for isolated houses and communities. This revised edition brings in new concepts developed and tested to expand the power range of application of motors as generators, to make this technology safer and more reliable, while keeping costs low and making it accessible to developing countries. It also contains a new chapter on mains-connecting micro-hydro generators. This edition also draws on the practical experience of manufacturers and installers of induction generator units working in village locations in a large number of countries, among them Sri Lanka, Nepal, Peru, Kenya and others.
Download or read book Axial Flux Permanent Magnet Brushless Machines written by Jacek F. Gieras and published by Springer Science & Business Media. This book was released on 2008-03-26 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Axial Flux Permanent Magnet (AFPM) brushless machines are modern electrical machines with a lot of advantages over their conventional counterparts. This timeless and revised second edition deals with the analysis, construction, design, control and applications of AFPM machines. The authors present their own research results, as well as significant research contributions made by others.
Download or read book Microturbine Generator Handbook written by Stephanie Hamilton and published by PennWell Books. This book was released on 2003 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors use a variety of photos to illustrate lessons, allowing readers to size up the structure or conditions depicted and answer questions based on their observations of the photos. The format includes true and false, multiple choice, fill in the blank, and scenario questions.
Download or read book Electromagnetic Fields in Electrical Engineering written by Andrzej Krawczyk and published by IOS Press. This book was released on 2002 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes contributions on: field theory and advanced computational electromagnetics; electrical machines and transformers; optimization and interactive design; electromagnetics in materials; coupled field and electromagnetic components in mechatronics; induction heating systems; bioelectromagnetics; and electromagnetics in education.
Download or read book Integration of Alternative Sources of Energy written by Felix A. Farret and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique electrical engineering approach to alternative sources ofenergy Unlike other books that deal with alternative sources of energyfrom a mechanical point of view, Integration of Alternative Sourcesof Energy takes an electrical engineering perspective. Moreover,the authors examine the full spectrum of alternative and renewableenergy with the goal of developing viable methods of integratingenergy sources and storage efficiently. Readers become thoroughlyconversant with the principles, possibilities, and limits ofalternative and renewable energy. The book begins with a general introduction and then reviewsprinciples of thermodynamics. Next, the authors explore both commonand up-and-coming alternative energy sources, including hydro,wind, solar, photovoltaic, thermosolar, fuel cells, and biomass.Following that are discussions of microturbines and inductiongenerators, as well as a special chapter dedicated to energystorage systems. After setting forth the fundamentals, the authorsfocus on how to integrate the various energy sources for electricalpower production. Discussions related to system operation,maintenance, and management, as well as standards forinterconnection, are also set forth. Throughout the book, diagrams are provided to demonstrate theelectrical operation of all the systems that are presented. Inaddition, extensive use of examples helps readers better grasp howintegration of alternative energy sources can beaccomplished. The final chapter gives readers the opportunity to learn about theHOMER Micropower Optimization Model. This computer model, developedby the National Renewable Energy Laboratory (NREL), assists in thedesign of micropower systems and facilitates comparisons of powergeneration techniques. Readers can download the software from theNREL Web site. This book is a must-read for engineers, consultants, regulators,and environmentalists involved in energy production and delivery,helping them evaluate alternative energy sources and integrate theminto an efficient energy delivery system. It is also a superiortextbook for upper-level undergraduates and graduate students.
Download or read book Microturbines written by Claire Soares and published by Elsevier. This book was released on 2011-04-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small-scale gas turbines, known as Microturbines, represent an exciting new development in gas turbine technology. They can run in size from small, human-scale machines down to micro-sized mini-machines that can barely be seen by the naked eye. They also run a great diversity of fuel types, from various types of commercial gases to waste-generated gases. This new book by industry expert Claire Soares will fully describe the various types of microturbines, their applications, and their particular requirements for installation, maintenance and repair. It will explain how a microturbine the size of a refrigerator can power an entire school, hospital or small factory, which is particularly useful for onsite, remote installations. The book will also show how microturbines can be paired with one or more fuel cells to form a hybrid energy source, or can be teamed with any source of distributed power, such as a mall hydro-turbine or a wind turbine. Moreover, the reader will learn how microturbines can run on a variety of fuels that are far cruder than those required by most standard gas turbines; they can be made to run, for instance, using gas from a landfill or biomass source. The reader will find detailed information on costs, specifications, and maintenance and repair guidelines. Ample references and resources will provide the reader with tools for finding manufacturers and product specifications for their own particular needs. - Covers major categories of microturbines, including factors common to their design, installation, operation, optimization, maintenance, and repair - Invaluable guidance on market factors and economics affecting microturbines and their applications, particularly for distributed power generation - Provides current case studies showing microturbines used in hybrid systems with fuel cells and other types of power generation systems
Download or read book Planning and Installing Micro Hydro Systems written by Chris Elliott and published by Routledge. This book was released on 2014-04-16 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: further chapters cover specific aspects of turbine types for hydro, not previously covered thoroughly by published material new title for successful Planning & Installing series
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Gas Turbine Power Generation written by Paul Breeze and published by Academic Press. This book was released on 2016-02-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Turbine Power Generation is a concise, up-to-date, and readable guide providing an introduction to gas turbine power generation technology. It includes detailed descriptions of gas fired generation systems, demystifies the functions of gas fired technology, and explores the economic and environmental risk factors Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide that will help them establish a reliable power supply as they also account for both social and economic objectives. - Provides a concise, up-to-date, and readable guide on gas turbine power generation technology - Focuses on the evolution of gas-fired power generation using gas turbines - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations
Download or read book Power Distribution Planning Reference Book Second Edition written by H. Lee Willis and published by CRC Press. This book was released on 2004-03-01 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing more than twice the content of the original edition, this new edition is the premier source on the selection, development, and provision of safe, high-quality, and cost-effective electric utility distribution systems, and it promises vast improvements in system reliability and layout by spanning every aspect of system planning including load forecasting, scheduling, performance, and economics. Responding to the evolving needs of electric utilities, Power Distribution Planning Reference Book presents an abundance of real-world examples, procedural and managerial issues, and engineering and analytical methodologies that are crucial to efficient and enhanced system performance.
Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
Download or read book Understanding Electric Utilities and De Regulation written by H. Lee Willis and published by CRC Press. This book was released on 2018-10-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power interruptions of the scale of the North American Blackout of 2003 are rare, but they still loom as a possibility. Will the aging infrastructure fail because deregulated monopolies have no financial incentives to upgrade? Is centralized planning becoming subordinate to market forces? Understanding Electric Utilities and De-Regulation, Second Edition provides an updated, non-technical description that sheds light on the nature of the industry and the issues involved in its transition away from a regulated environment. The book begins by broadly surveying the industry, from a regulated utility structure to the major concepts of de-regulation to the history of electricity, the technical aspects, and the business of power. Then, the authors delve into the technologies and functions on which the industry operates; the many ways that power is used; and the various means of power generation, including central generating stations, renewable energy, and single-household size generators. The authors then devote considerable attention to the details of regulation and de-regulation. To conclude, one new chapter examines aging infrastructures and reliability of service, while another explores the causes of blackouts and how they can be prevented. Based on the authors' extensive experience, Understanding Electric Utilities and De-Regulation, Second Edition offers an up-to-date perspective on the major issues impacting the daily operations as well as the long-term future of the electric utilities industry.
Download or read book The Biogas Handbook written by Arthur Wellinger and published by Elsevier. This book was released on 2013-02-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing pressures to utilize wastes effectively and sustainably, biogas production represents one of the most important routes towards reaching renewable energy targets. This comprehensive reference on the development and deployment of biogas supply chains and technology reviews the role of biogas in the energy mix and outlines the range of biomass and waste resources for biogas production. Contributors provide detailed coverage of anaerobic digestion for the production of biogas and review the utilization of biogas for various applications. They consider all aspects in the biogas production chain from the origin of the biomass feedstocks, feedstock selection and preparation, the anaerobic digestion process, biogas plant equipment design and operation, through to utilization of the biogas for energy production and the residue, the digestate, which can be used as a biofertilizer. The book also addresses biogas utilization, and explores environmental impacts and commercial market applications. Table of Contents: Biogas as an energy option: An overview Part 1 Biomass resources, feedstock treatment and biogas production: Biomass resources for biogas production; Analysis and characterisation of biogas feedstocks; Storage and pre-treatment of substrates for biogas production; Fundamental science and engineering of the anaerobic digestion process for biogas production; Optimisation of biogas yields from anaerobic digestion by feedstock type; Anaerobic digestion as a key technology for biomass valorisation: Roles and contribution to the energy balance of biofuel chains Part 2 Plant design, engineering, process optimisation and digestate utilization: Design and engineering of biogas plants; Energy flows in biogas plants: Analysis and implications for plant design; Process control in biogas plants; Methane emissions in biogas production; Biogas digestate quality and utilization; Land application of digestate Part 3 Biogas utilisation: international experience and best practice: Biogas cleaning; Biogas up-grading to biomethane; Biomethane injection into natural gas networks; Generation of heat and power from biogas for stationery applications: Boilers, gas engines and turbines, combined heat and power (CHP) plants and fuel cells; Biomethane for transport applications; Market development and certification schemes for biomethane
Download or read book Dynamic Simulation of Electric Machinery written by Chee-Mun Ong and published by Prentice Hall. This book was released on 1998 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and its accompanying CD-ROM offer a complete treatment from background theory and models to implementation and verification techniques for simulations and linear analysis of frequently studied machine systems. Every chapter of Dynamic Simulation of Electric Machinery includes exercises and projects that can be explored using the accompanying software. A full chapter is devoted to the use of MATLAB and SIMULINK, and an appendix provides a convenient overview of key numerical methods used. Dynamic Simulation of Electric Machinery provides professional engineers and students with a complete toolkit for modeling and analyzing power systems on their desktop computers.
