Download or read book Measurement of Engineering Properties of Soils written by E. S. Reddy and published by New Age International. This book was released on 2002 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Highlights The Procedures For 30 Tests Used To Measure The Engineering Properties Of Soil In Both Laboratory And Field Including Dynamic Testing Of Soils. All The Test Procedures Are Based On Indian Standard Practice And Are Very Close To Astm Standards. Features Of This Book Include: * Test Procedures And Tabular Forms For A Maximum Number Of Field And Laboratory Tests. * Classification Of The Soil Tests Based On Type Of Project And Type Of Soil. * A Set Of Questions Is Presented At The End Of Each Chapter For Self Examination. * For Each Test, Theoretical Principles And The Precautions To Be Followed During The Test Are Explained.This Book Will Be Useful To B.Tech./B.E. (Civil Engineering) And M.E./ M.Tech. (Geotechnical Engineering) Students As Laboratory Manual And Reference Book. It Is Hoped That This Book Will Also Be Useful To Field Engineers As Handbook In Soil Mechanics As It Helps In Deciding The Test Programme For A Given Project. Similarly, The Book Will Be Helpful For Quality Control Engineers.
Download or read book Engineering Properties of Soils and Their Measurement written by Joseph E. Bowles and published by McGraw-Hill Companies. This book was released on 1978 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Properties of Soils and Their Measurement written by Joseph E. Bowles and published by . This book was released on 1992 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Properties of Soils and Their Measurement written by Joseph Esmond Bowles and published by . This book was released on 1981 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Properties written by Cheng Liu and published by . This book was released on 2000 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying diskette includes software that allows easy analysis of collected data and information files.
Download or read book Geotechnical Laboratory Measurements for Engineers written by John T. Germaine and published by John Wiley & Sons. This book was released on 2009-06-02 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the most useful geotechnical laboratory measurements Cost effective, high quality testing of geo-materials is possible if you understand the important factors and work with nature wisely. Geotechnical Laboratory Measurements for Engineers guides geotechnical engineers and students in conducting efficient testing without sacrificing the quality of results. Useful as both a lab manual for students and as a reference for the practicing geotechnical engineer, the book covers thirty of the most common soil tests, referencing the ASTM standard procedures while helping readers understand what the test is analyzing and how to interpret the results. Features include: Explanations of both the underlying theory of the tests and the standard testing procedures The most commonly-taught laboratory testing methods, plus additional advanced tests Unique discussions of electronic transducers and computer controlled tests not commonly covered in similar texts A support website at www.wiley.com/college/germaine with blank data sheets you can use in recording the results of your tests as well as Microsoft Excel spreadsheets containing raw data sets supporting the experiments
Download or read book Soil Properties written by Cheng Liu and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Amrican Society for Testing and Materials procedures, the most commonly used methods in civil engineering practice, this laboratory manual has been expanded and updated to include current information. The classification of soils for engineering purposes is covered.
Download or read book Measuring Engineering Properties of Soil written by Warren K. Wray and published by Prentice Hall. This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Engineering in Residual Soils written by Laurence D. Wesley and published by John Wiley & Sons. This book was released on 2010-08-05 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wiley has long held a pre-eminent position as a publisher of books on geotechnical engineering, with a particular strength in soil behavior and soil mechanics, at both the academic and professional level. This reference will be the first book focused entirely on the unique engineering properties of residual soil. Given the predominance of residual soils in the under-developed parts of the United States and the Southern Hemisphere, and the increasing rate of new construction in these regions, the understanding of residual soils is expected to increase in importance in the coming years. This book will be written for the practicing geotechnical engineer working to any degree with residual soils. It will describe the unique properties of residual soil and provide innovative design techniques for building on it safely.The author will draw on his 30 years of practical experience as a practicing geotechnical engineer, imbuing the work with real world examples and practice problems influenced by his work in South America and Southeast Asia.
Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Soil Physical Measurement and Interpretation for Land Evaluation written by Keppel Coughlan and published by CSIRO PUBLISHING. This book was released on 2002-11-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil physical measurements are essential for solving many natural resource management problems. This operational laboratory and field handbook provides, for the first time, a standard set of methods that are cost-effective and well suited to land resource survey. It provides: *practical guidelines on the soil physical measurements across a range of soils, climates and land uses; *straightforward descriptions for each method (including common pitfalls) that can be applied by people with a rudimentary knowledge of soil physics, and *guidelines on the interpretation of results and integration with land resource assessment. Soil Physical Measurement And Interpretation for Land Evaluation begins with an introduction to land evaluation and then outlines procedures for field sampling. Twenty detailed chapters cover pore space relations, water retention, hydraulic conductivity, water table depth, dispersion, aggregation, particle size, shrinkage, Atterburg limits and strength. The book includes procedures for estimating soil physical properties from more readily available data and shows how soil physical data can be integrated into land planning and management decisions.
Download or read book Engineering Properties of Soils and Rocks written by F. G. Bell and published by Elsevier. This book was released on 2013-10-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Properties of Soils and Rocks, Third Edition serves as a guide to the engineering properties and behavior of soils and rocks. The text also complements other texts on rock and soil mechanics. The book covers topics such as the properties and classification of soils such as tills and other kinds of soils related to cold climates, tropical soils, and organic soils such as peat. The text also includes the engineering behavior and properties, classification and description, discontinuities, and weathering of rocks and rock masses. The monograph is recommended for engineers who would like to know about the properties of soils and rocks and the application of their study in the field of engineering.
Download or read book Unsaturated Soil Mechanics in Engineering Practice written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 2012-07-24 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.
Download or read book The Delft Sand Clay and Rock Cutting Model written by S.A. Miedema and published by IOS Press. This book was released on 2014-10-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock. Small blade angles and large blade angles are discussed for each soil type, and for each case considered the equations/model for cutting forces, power and specific energy are given. With models verified by laboratory research, principally from the Delft University of Technology, and data from other recognized sources, this book will prove an invaluable reference for anybody whose work involves major excavations of any kind.
Download or read book Soil as an Engineering Material written by Wesley G. Holtz and published by . This book was released on 1969 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Measuring Soil Health written by Wilfred Otten and published by Burleigh Dodds Agricultural Sc. This book was released on 2020-07-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume begins with a review of advances in measuring soil biological activity. Parts 2 and 3 survey developments in measuring soil physical and chemical properties. The collection concludes by reviewing soil health indicators and decision support systems for improving soil management.
Download or read book Encyclopedia of Engineering Geology written by Peter T. Bobrowsky and published by Springer. This book was released on 2018-08-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the multi-disciplinary topic of engineering geology and the environment, one of the fastest growing, most relevant and applied fields of research and study within the geosciences. It covers the fundamentals of geology and engineering where the two fields overlap and, in addition, highlights specialized topics that address principles, concepts and paradigms of the discipline, including operational terms, materials, tools, techniques and methods as well as processes, procedures and implications. A number of well known and respected international experts contributed to this authoritative volume, thereby ensuring proper geographic representation, professional credibility and reliability. This superb volume provides a dependable and ready source of information on approximately 300 topical entries relevant to all aspects of engineering geology. Extensive illustrations, figures, images, tables and detailed bibliographic citations ensure that the comprehensively defined contributions are broadly and clearly explained. The Encyclopedia of Engineering Geology provides a ready source of reference for several fields of study and practice including civil engineers, geologists, physical geographers, architects, hazards specialists, hydrologists, geotechnicians, geophysicists, geomorphologists, planners, resource explorers, and many others. As a key library reference, this book is an essential technical source for undergraduate and graduate students in their research. Teachers/professors can rely on it as the final authority and the first source of reference on engineering geology related studies as it provides an exceptional resource to train and educate the next generation of practitioners.
