Download or read book Martensitic Transformation written by Zenji Nishiyama and published by Elsevier. This book was released on 2012-12-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensitic Transformation examines martensitic transformation based on the known crystallographical data. Topics covered range from the crystallography of martensite to the transformation temperature and rate of martensite formation. The conditions for martensite formation and stabilization of austenite are also discussed, along with the crystallographic theory of martensitic transformations. Comprised of six chapters, this book begins with an introduction to martensite and martensitic transformation, with emphasis on the basic properties of martensite in steels such as carbon steels. The next two chapters deal with the crystallography of martensite and discuss the martensitic transformation behavior of the second-order transition; lattice imperfections in martensite; and close-packed layer structures of martensites produced from ? phase in noble-metal-base alloys. Thermodynamical problems and kinetics are also analysed, together with conditions for the nucleation of martensite and problems concerning stabilization of austenite. The last chapter discusses the theory of the mechanism underlying martensitic transformation. This monograph will be of interest to metallurgists and materials scientists.
Download or read book Martensitic Transformation written by Zenji Nishiyama and published by Academic Press. This book was released on 1978-01-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensitic Transformation examines martensitic transformation based on the known crystallographical data. Topics covered range from the crystallography of martensite to the transformation temperature and rate of martensite formation. The conditions for martensite formation and stabilization of austenite are also discussed, along with the crystallographic theory of martensitic transformations. Comprised of six chapters, this book begins with an introduction to martensite and martensitic transformation, with emphasis on the basic properties of martensite in steels such as carbon steels. The next two chapters deal with the crystallography of martensite and discuss the martensitic transformation behavior of the second-order transition; lattice imperfections in martensite; and close-packed layer structures of martensites produced from ? phase in noble-metal-base alloys. Thermodynamical problems and kinetics are also analysed, together with conditions for the nucleation of martensite and problems concerning stabilization of austenite. The last chapter discusses the theory of the mechanism underlying martensitic transformation. This monograph will be of interest to metallurgists and materials scientists.
Download or read book Phase Transitions in Materials written by Brent Fultz and published by Cambridge University Press. This book was released on 2014-08-14 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, concise and rigorous textbook covering phase transitions in the context of advances in electronic structure and statistical mechanics.
Download or read book Proceedings of the International Conference on Martensitic Transformations Chicago written by Aaron P. Stebner and published by Springer. This book was released on 2018-04-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection is organized around the central theme of “Martensite by Design.” Contributions include design, microstructure, properties, advanced processing and manufacturing, performance, phase transformations, and characterization.
Download or read book IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids written by Qing-Ping Sun and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transition phenomena in solids are of vital interest to physicists, materials scientists, and engineers who need to understand and model the mechanical behavior of solids during various kinds of phase transformations. This volume is a collection of 29 written contributions by distinguished invited speakers from 14 countries to the IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids, the first IUTAM Symposium focusing on this topic. It contains basic theoretical and experimental aspects of the recent advances in the mechanics research of martensitic phase transformations. The main topics include microstructure and interfaces, material instability and its propagation, micromechanics approaches, interaction between plasticity and phase transformation, phase transformation in thin films, single and polycrystalline shape memory alloys, shape memory polymers, TRIP steels, etc. Due to the multidisciplinary nature of the research covered, this volume will be of interest to researchers, graduate students and engineers in the field of theoretical and applied mechanics as well as materials science and technology.
Download or read book International Conference on Martensitic Transformations ICOMAT 2008 written by Gregory Olson and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 1617 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the week of June 29 - July 5, 2008, over 300 scientists and engineers from 30 countries spanning five continents converged at the historic La Fonda Hotel in the city of Santa Fe, New Mexico, USA to participate in the 12th International Conference on Martensitic Transformations (ICOMAT-08) to fathom the peculiar world of certain crystalline materials that undergo structural change when cooled or stressed. Many of these materials can restore their original shape when reheated, thus the name "Shape Memory Alloys". In the spirit of Santa Fe, a central theme of ICOMAT-08 was INTEGRATION across many dimensions.
Download or read book Transformations of Materials written by Dimitri D Vvedensky and published by Morgan & Claypool Publishers. This book was released on 2019-09-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.
Download or read book Materials Properties Handbook written by Gerhard Welsch and published by ASM International. This book was released on 1993-12-31 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive datasheets on more than 60 titanium alloys More than 200 pages on metallurgy and fabrication procedures Input from more than 50 contributors from several countries Careful editorial review for accuracy and usefulness. Materials Properties Handbook: Titanium Alloys provides a data base for information on titanium and its alloys, and the selection of specific alloys for specific applications. The most comprehensive titanium data package ever assembled provides extensive information on applications, physical properties, corrosion, mechanical properties (including design allowances where available), fatigue, fracture properties, and elevated temperature properties. The appropriate specifications for each alloy are included. This international effort has provided a broad information base that has been compiled and reviewed by leading experts within the titanium industry, from several countries, encompassing numerous technology areas. Inputs have been obtained from the titanium industry, fabricators, users, government and academia. This up-to-date package covers information from almost the inception of the titanium industry, in the 1950s, to mid-1992. The information, organized by alloy, makes this exhaustive collection an easy-to-use data base at your fingertips, which generally includes all the product forms for each alloy. The 60-plus data sheets supply not only extensive graphical and tabular information on properties, but the datasheets also describe or illustrate important factors which would aid in the selection of the proper alloy or heat treatment. The datasheets are further supplemented with back-ground information on the metallurgy and fabrication characteristics of titanium alloys. An especially extensive coverage of properties, processing and metallurgy is provided in the datasheet for the workhorse of the titanium industry, Ti-6Al-4V. This compendium includes the newest alloys made public. even those still under development. In many cases, key references are included for further information on a given subject. Comprehensive datasheets provide extensive information on: Applications, Specifications, Corrosion, Mechanical Design Properties, Fatigue and Fracture
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book Theory of Structural Transformations in Solids written by Armen G. Khachaturyan and published by Courier Corporation. This book was released on 2013-12-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing both theoretical and practical aspects of phase transformation in alloys, this text formulates significant aspects of the quantitative metallurgy of phase transformations. It further applies solid-state theoretical concepts to structure problems arising in experimental studies of real alloys. Author Armen G. Khachaturyan, Professor of Materials Science at Rutgers University, ranks among the foremost authorities on this subject. In this volume, he takes a creative approach to examining change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening. Unifying relationships among various fields of solid-state physics are stressed throughout the book. Topics include structure changes in two-phase alloys controlled by the phase transformation elastic strain, in addition to important results in the area of microscopic elasticity regarding problems of elastic interaction in impurity atoms, and strain-induced ordering and decomposition in interstitial solutions. An excellent text for advanced undergraduate and graduate courses in physical metallurgy, solid state physics, solid state chemistry, and materials science, this volume is also a valuable reference for professionals conducting research in phase transformations
Download or read book Kinetics of Isothermal Martensitic Transformation written by Naresh N. Thadhani and published by . This book was released on 1986 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Martensitic Transformation in Ceramics its Role in Transformation Toughening written by Patrick M. Kelly and published by . This book was released on 2002 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by Vadim M. Schastlivtsev and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-02-07 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact overview on physical metallurgy provides a detailed coverage of phase equilibria and phase transformations in metals and alloys. It presents the broad range of topics from processes of crystallization and diffusion mechanisms to plastic deformations and structural transformations especially in iron alloys and steels. As an introductory work it is valuable to Material Scientists and Engineers.
Download or read book Transformation Toughening Of Ceramics written by David J. Green and published by CRC Press. This book was released on 2018-02-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide a coherent and up-to-date discussion of the scientific work concerning the transformation toughening of ceramics. We hope the book is useful to scientists, engineers and students who are new to these materials. It is intended both as a source of learning and information to those who are new to these materials. It is intended both as a source of learning behaviour and microstructural relationships in transformation-toughened ceramics. While it has been our aim to present a book that is current as possible at the time of publication, the subject is still expanding in many areas; so our hope is that the reader will also gain an insight into the direction of future advances.
Download or read book Microstructure of Martensite written by Kaushik Bhattacharya and published by Oxford University Press. This book was released on 2003-11-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensites are crystalline solids that display dazzling patterns at the microscopic scales. This microstructure gives rise to unusual macroscopic properties like the shape-memory effect. Starting with the crystalline structure, this book describes a theoretical framework for studying martensites and uses the theory to explain why these materials form microstructure. The macrostructure consequences of the microstructure are subsequently discussed. Complete with a piece of shape-memory wire and numerous examples from real materials, this book represents a successful case study in multiscale modeling, giving a clear understanding of the link between microstructure and macrostructure properties. Beautifully written, in a most clear and pedagogical manner, it holds appeal for a broad audience. On the one hand, it introduces modern modeling techniques to those trained in materials science, mechanics and physics and shows how these techniques can be used in real-world problems. On the other hand, it introduces physical phenomena to those trained in mathematics, and demonstrates how such phenomena give rise to interesting mathematical problems.
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book Precipitation and Martensitic Transformation in Sputtered Near equiatomic TiNi Films written by Mitchell Harris Brekson and published by . This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
