Download or read book Fiber Fracture written by M. Elices and published by Elsevier. This book was released on 2002-11-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book came out of the EURESCO Conference on High Performance Fibers: Euroconference on Fiber Fracture in 2000. Many of the books that are currently available look at different aspects of fiber processing, properties, or applications, but none are focussed on the fracture behaviour of fibers. This book presents the mechancisms and models of fiber fracture currently available for both natural and synthetic fibers, and it is expected that increasingly there will be cross fertilization between the fields, opening new frontiers in academic research and more competitive products for industry. It covers the following areas of fiber fracture: ceramic fibers; glass fibers; carbon filters; metallic fibers and thin wires; polymeric fibers; and carbon nanotubes.
Download or read book Non destructive Testing of Impact Damage in Fiber reinforced Polymer Composites written by Milad Saeedifar and published by Elsevier. This book was released on 2024-08-08 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive Testing of Impact Damage in Fiber-reinforced Polymer Composites: Fundamentals and Applications provides detailed knowledge on the fundamentals and applications of frequently used nondestructive testing (NDT) techniques utilized to assess impact damage in composite structures. This book starts with an introduction to impact damage in composite structures, each subsequent chapter focuses on evaluating damage using specific NDT methods. Chapters 2–4 concentrate on vision-based NDT methods such as visual inspection, digital image correlation, and digital shearography. Following this, Chapters 5–6 delve into ultrasound-based methods, including acoustic emission and phased-array ultrasonic inspection. Radiation-based methods, micro-CT, and thermography are discussed in Chapters 7 and 8, while Chapters 9 and 10 elucidate microwave inspection and electrical impedance tomography. This book is a useful reference for both academia and industry and covers the fundamentals, practical tips, case studies, and applications, as well as current research trends and future possibilities, for each technique. - Insights into the diverse damage levels in composite materials resulting from low-velocity impact, ranging from micro matrix cracks to severe delamination and fiber breakage - Covers a broad range of NDT techniques, including recently developed NDT techniques, suitable for detecting impact damage in composite materials - Serves as a valuable reference for both academia and industry, providing comprehensive coverage of fundamental principles, practical insights, applications, case studies, current research trends, and future prospects for each NDT technique
Download or read book Fracture Mechanics written by National Symposium on Fracture Mechanics and published by ASTM International. This book was released on 1979 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Emission Signal Analysis and Damage Mode Identification of Composite Wind Turbine Blades written by Pengfei Liu and published by Elsevier. This book was released on 2023-05-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission Signal Analysis and Damage Mode Identification of Composite Wind Turbine Blades covers both the underlying theory and various techniques for effective structural monitoring of composite wind turbine blades via acoustic emission signal analysis, helping readers solve critical problems such as noise elimination, defect detection, damage mode identification, and more. Author Pengfei Liu introduces techniques for identifying and analyzing progressive failure under tension, delamination, damage localization, adhesive composite joint failure, and other degradation phenomena, outlining methods such as time-difference, wavelet, machine learning, and more including combined methods. The disadvantages and advantages of using each method are covered as are techniques for different blade-lengths and various blade substructures. Piezoelectric sensors are discussed as is experimental analysis of damage source localization. The book also takes great lengths to let readers know when techniques and concepts discussed can be applied to composite materials and structures beyond just wind turbine blades. - Features fundamental acoustic emission theories and techniques for monitoring the structural integrity of wind turbine blades - Covers sensor arrangements, noise elimination, defect detection, and dominating damage mode identification using acoustic emission techniques - Outlines the wavelet method, the time-difference defect detection method, and damage mode identification techniques using machine learning - Discusses how the techniques covered can be extended and adapted for use in other composite structures under complex loads and in different environments
Download or read book Fractography of Modern Engineering Materials written by John E. Masters and published by ASTM International. This book was released on 1993 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Modeling of Composite Structures written by Pengfei Liu and published by Elsevier. This book was released on 2021-03-10 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage Modeling of Composite Structures: Strength, Fracture, and Finite Element Analysis provides readers with a fundamental overview of the mechanics of composite materials, along with an outline of an array of modeling and numerical techniques used to analyze damage, failure mechanisms and safety tolerance. Strength prediction and finite element analysis of laminated composite structures are both covered, as are modeling techniques for delaminated composites under compression and shear. Viscoelastic cohesive/friction coupled model and finite element analysis for delamination analysis of composites under shear and for laminates under low-velocity impact are all covered at length. A concluding chapter discusses multiscale damage models and finite element analysis of composite structures. - Integrates intralaminar damage and interlaminar delamination under different load patterns, covering intralaminar damage constitutive models, failure criteria, damage evolution laws, and virtual crack closure techniques - Discusses numerical techniques for progressive failure analysis and modeling, as well as numerical convergence and mesh sensitivity, thus allowing for more accurate modeling - Features models and methods that can be seamlessly extended to analyze failure mechanisms and safety tolerance of composites under more complex loads, and in more extreme environments - Demonstrates applications of damage models and numerical methods
Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. - Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites - Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers - Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models
Download or read book Handbook of Multiphase Polymer Systems written by Abderrahim Boudenne and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase polymeric systems include a wide range of materials such as composites, blends, alloys, gels, and interpenetrating polymer networks (IPNs). A one-stop reference on multiphase polymer systems, this book fully covers the preparation, properties, and applications of advanced multiphase systems from macro to nano scales. Edited by well-respected academics in the field of multiphase polymer systems, the book includes contributions from leading international experts. An essential resource for plastic and rubber technologists, filler specialists and researchers in fields studying thermal and electrical properties.
Download or read book Fundamentals of Spun Yarn Technology written by Carl A. Lawrence and published by CRC Press. This book was released on 2003-03-28 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing textbooks covering the subject of yarn manufacture largely concentrate on describing the workings of machines. Fundamentals of Spun Yarn Technology presents complete coverage of yarn manufacture and technology and current research findings on the structure and properties of spun yarns. Written by a well-known and respected authority on textile technology, it not only introduces the subject, but it provides students with an advanced understanding of the various process stages. The book introduces the rudiments of staple yarn technology, covering the manufacturing process, the raw materials, and processes including short staple, worsted, semiworsted and woollen spinning, doubling, and specialty yarn processes. It also covers the more advanced studies in staple yarn technology, including new developments in fiber preparation technology, carding technology, roller drafting, gilling, ring spinning, open-end rotor spinning, air jet spinning and new research on unconventional spinning systems. This extensive range of topics, along with hundreds of tables and illustrations presented in Fundamentals of Spun Yarn Technology make it a comprehensive and up-to-date treatment of the field.
Download or read book Report written by and published by . This book was released on 1948 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of damage mechanisms in weave reinforced materials based on multiscale modeling written by Naake, Dominik Robert and published by KIT Scientific Publishing. This book was released on 2020-09-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A weave reinforced composite material with a thermoplastic matrix is investigated by using a multiscale chain to predict the macroscopic material behavior. A large-strain framework for constitutive modeling with focus on material non-linearities, i.e. plasticity and damage is defined. The ability of the geometric and constitutive models to predict the deformation and failure behavior is demonstrated by means of selected examples.
Download or read book Thermoplastic Polymer Composites written by Sodagudi Francis Xavier and published by John Wiley & Sons. This book was released on 2022-12-01 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: THERMOPLASTIC POLYMER COMPOSITES The monograph represents a life-long career in industry and academia and creates an exhaustive and comprehensive narrative that gives a complete understanding of important and state-of-the-art aspects of polymer composites including processing, properties, performance, applications & recyclability. Based on 40 years’ experience in both industry and academia, the author’s goal is to make a comprehensive and up-to-date account that gives a complete understanding of various aspects of polymer composites covering processing, properties, performance, applications & recyclability. Divided into 8 main chapters, the book treats thermoplastics vs. thermosets and the processing of thermoplastics; filled polymer composites; short fiber reinforced composites; long fiber reinforced composites; continuous fiber reinforced composites; nanocomposites; applications; and recycling polymer composites. Readers can have confidence that: Thermoplastic Polymer Composites (TPC) gives a comprehensive understanding of polymer composites’ processing, properties, applications, and their recyclability; Provides a complete understanding of man-made as well as natural fiber reinforced polymer (FRP) composites and explores in depth how short fiber, long fiber, and continuous fiber can transform the entire domain of composites’ processing and properties; Provides a deep understanding of nanocomposites with more than 50 examples covering both commodities as well as engineering thermoplastics. It presents conducting composites and several bio-medical applications of composites that are already passed through laboratories. Audience This unique reference book will be of great value to researchers and postgraduate students in materials science, polymer science, as well industry engineers in plastics manufacturing. Those working in product development laboratories of polymer and allied industries will also find it helpful.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2093 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at University of San Diego, San Diego, CA, on July 27 to August 1, 1997. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the National Institute of Standards and Technology, the Federal Aviation Administration, and the National Science Foundation IndustrylUniversity Cooperative Research Centers. This year's Review of Progress in QNDE was attended by approximately 370 participants from the US and many foreign countries who presented a total of approximately 350 papers. As usual, the meeting was divided into 36 sessions with four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications and inspection systems, and methods of inspection science from acoustics to x-rays. The Review continues to experience some fluctuations in size, mostly under pressure from a decrease in funding for NDE research at the US Federal level, but increased participation from foreign laboratories has more than made up the difference. The Review is ideally sized to permit a full-scale overview of the latest developments in a collegial atmosphere that most participants favor. The opening plenary session this year concentrated on advances in imaging technologies and methodologies that have been made in recent years. Dr. K.
Download or read book Fracture Mechanics written by Thomas A. Cruse and published by ASTM International. This book was released on 1988 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites written by Sanjay Mavinkere Rangappa and published by Springer Nature. This book was released on 2021-04-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified approach to fracture behavior of natural and synthetic fiber-reinforced polymer composites on the basis of fiber orientation, the addition of fillers, characterization, properties and applications. In addition, the book contains an extensive survey of recent improvements in the research and development of fracture analysis of FRP composites that are used to make higher fracture toughness composites in various applications.The FRP composites are an emerging area in polymer science with many structural applications. The rise in materials failure by fracture has forced scientists and researchers to develop new higher strength materials for obtaining higher fracture toughness. Therefore, further knowledge and insight into the different modes of fracture behavior of FRP composites are critical to expanding the range of their application.
Download or read book Failure Analysis of Composite Materials with Manufacturing Defects written by Ramesh Talreja and published by CRC Press. This book was released on 2024-02-16 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to metals, a composite material acquires an internal structure where the imprint of its manufacturing process history is a significant part of the internal structure’s makeup and in many cases determines how the material responds to external impulses. The performance for which a composite material is designed must therefore be assessed with due consideration to the manufacturing-induced features in the material volume. Failure theories based on homogenized composites cannot deliver reliable methodologies for performance assessment. This book details approaches that depart from traditional treatments by accounting for manufacturing defects in composite materials. It discusses how manufacturing defects are produced and how they affect the performance of composite materials. Serves as the only book to bring knowledge on manufacturing and failure modeling together in a coherent manner. Guides readers on mechanisms-based modeling with a focus on defects. Treats statistical simulation of microstructure with defects aimed at physical modeling. Covers manufacturing methods for polymer matrix composites. Describes failure modes in unidirectional composites and laminates in the presence of defects. Discusses fatigue damage in the presence of defects. This book is aimed at researchers in industry and academia in aerospace engineering, mechanical engineering, and materials science and engineering. It also serves as a reference for students taking advanced courses in composite materials.
Download or read book NASA Technical Paper written by and published by . This book was released on 1990 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
