Download or read book Advances in Ultra low Emission Control Technologies for Coal Fired Power Plants written by Yongsheng Zhang and published by Woodhead Publishing. This book was released on 2019-07-12 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ultra-low Emission Control Technologies for Coal-Fired Power Plants discusses the emissions standards of dust, SO2, NOx and mercury pollution, also presenting the key technologies available to control emissions in coal-fired power plants. The practical effects of ultra-low emissions projects included help the reader understand related implications in plants. Emphasis is placed on 300MW subcritical, 600MW subcritical, 660MW supercritical and 1000MW ultra-supercritical coal-fired units. The influence of different pollutant control units, such as wet electrostatic precipitator, desulfurization equipment and the electrostatic precipitator are also analyzed, and the pollutant levels before and after retrofitted ultra-low emissions are compared throughout. - Provides a unique analysis of advanced technologies, such as dust-removal, desulfurization and denitrification used for ultra-low emissions in coal-fired power plants - Introduces emission standards for dust, SO2, NOx and Mercury pollution from coal-fired power plants in China, the US and Europe - Provides solutions to reducing emissions based on technological advances in China - Analyzes the environmental and economic effects of these technologies

Download or read book Flue Gas Desulfurization and Industrial Minerals written by M. Michael Miller and published by . This book was released on 1993 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 4,101 references on FGD [Flue Gas Desulfurization] ... primarily from 1982 through June 1993. Complements the "Flue Gas Desulfurization and Denitrification" bibliography published by the U.S. Dept. of Energy in Jan. 1985. References were located on the Energy, Science and Technology, Pollution Abstracts, and Environmental Bibliography databases. Primarily covers FGD and the use of industrial minerals in the desulfurization process or in by-product utilization and disposal. Emphasizes post-combustion removal of sulfur dioxide through processes such as in-duct injection and wet and dry scrubbing.

Download or read book Clean Air Act Mercury Control Technologies at Coal Fired Power Plants Have Achieved Substantial Emissions Reductions written by and published by DIANE Publishing. This book was released on with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Plant Engineering written by Larry Drbal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume provides a complete, authoritative, up-to-date reference for all aspects of power plant engineering. Coverage ranges from engineering economics to coal and limestone handling, from design processes to plant thermal heat balances. Both theory and practical applications are covered, giving engineers the information needed to plan, design, construct, upgrade, and operate power plants. Power Plant Engineering is the culmination of experience of hundreds of engineers from Black & Veatch, a leading firm in the field for more than 80 years. The authors review all major power generating technologies, giving particular emphasis to current approaches. Special features of the book include: * More than 1000 figures and lines drawings that illustrate all aspects of the subject. * Coverage of related components and systems in power plants such as turbine-generators, feedwater heaters, condenser, and cooling towers. * Definitions and analyses of the features of various plant systems. * Discussions of promising future technologies. Power Plant Engineering will be the standard reference in the professional engineer's library as the source of information on steam power plant generation. In addition, the clear presentation of the material will make this book suitable for use by students preparing to enter the field.

Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture

Download or read book Electrostatic Precipitation written by Keping Yan and published by Springer Science & Business Media. This book was released on 2010-07-19 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electrostatic Precipitation" includes selected papers presented at the 11th International Conference on Electrostatic Precipitation. It presents the newest developments in electrostatic precipitation, flue gas desulphurization (FGD), selective catalytic reduction (SCR), and non-thermal plasma techniques for multi-pollutants emission control. Almost all outstanding scientists and engineers world-wide in the field will report their on-going researches. The book will be a useful reference for scientists and engineers to keep abreast of the latest developments in environmental science and engineering.

Download or read book Fossil Energy Update written by and published by . This book was released on 1978 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CLEAN POWER ACT HEARINGS S HRG 107 570 COMMITTEE ON ENVIRONMENT PUBLIC WORKS UNITED STATES SENATE 107TH CONGRESS 1ST 2ND written by and published by . This book was released on 2003 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pulse Jet Filtration an Effective Way to Control Industrial Pollution written by Arunangshu Mukhopadhyay and published by Routledge. This book was released on 2019-03-15 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental concept of design and development of pulse-jet filters under varied situations. It discusses technical and commercial solutions for successful operation of textile industries integrated with pollution control equipment maintaining clean air requirements.

Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration

Download or read book Gas Cleaning in Demanding Applications written by J.P. Seville and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, interest in the technology of gas cleaning has grown, driven partly by environmental legislation, but also by demands for increases in process efficiency and intensity - notable for power generation and waste incineration. This book, which leads on from our successful Gas Cleaning at High Temperatures, describes the present state of the art and its industrial applications.

Download or read book Clean Power Act written by United States. Congress. Senate. Committee on Environment and Public Works. Subcommittee on Clean Air, Wetlands, and Climate Change and published by . This book was released on 2002 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Waste Treatment Handbook written by Frank Woodard and published by Elsevier. This book was released on 2001-09-11 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: All industries produce waste products that unless treated or mitigated in some way will be harmful to the human or natural environment. These waste products will generally need to be identified according to the industrial process in question, neutralized or rendered less harmful and finally disposed of into the surrounding land, air or watercourses. It is therefore of vital importance to every environmental, pollution or plant manager or engineer that these processes be fully understood and implemented or the cost to either the company or the environment can be catastrophic.With increasing government regulation of pollution, as well as willingness to levy punitive fines for transgressions, and the ever-present financial imperative to carry out these activities in the most efficient and cost-effective manner it is the responsibility of the professionals in question to ensure that they have the most up-to-date information available at their disposal. This book provides not only that, but the only available methodology for identifying which waste types are produced from which industrial processes, and how they can be treated. This unique feature makes this book one that every environmental, industrial and plant manager, engineer and consultant will want to have on their bookshelf.Essential aspect of, and requirement for, all manufacturing industryThe only up-to-date book on this subject area availableTakes a practical applications standpoint, not a theoretical approach

Download or read book Coal Fired Power Generation Handbook written by James G. Speight and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal accounts for approximately one quarter of world energy consumption and of the coal produced worldwide approximately 65% is shipped to electricity producers and 33% to industrial consumers, with most of the remainder going to consumers in the residential and commercial sectors. The total share of total world energy consumption by coal is expected to increase to almost 30% in 2035. This book describes the challenges and steps by which electricity is produced form coal and deals with the challenges for removing the environmental objections to the use of coal in future power plants. New technologies are described that could virtually eliminate the sulfur, nitrogen, and mercury pollutants that are released when coal is burned for electricity generation. In addition, technologies for the capture greenhouse gases emitted from coal-fired power plants are described and the means of preventing such emissions from contributing to global warming concerns. Written by one of the world’s leading energy experts, this volume is a must-have for any engineer, scientist, or student working in this field, providing a valuable reference and guide in a quickly changing field.

Download or read book Numerical Simulation for Next Generation Thermal Power Plants written by Falah Alobaid and published by Springer. This book was released on 2018-03-29 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides highly specialized researchers and practitioners with a major contribution to mathematical models’ developments for energy systems. First, dynamic process simulation models based on mixture flow and two-fluid models are developed for combined-cycle power plants, pulverised coal-fired power plants, concentrated solar power plant and municipal waste incineration. Operation data, obtained from different power stations, are used to investigate the capability of dynamic models to predict the behaviour of real processes and to analyse the influence of modeling assumptions on simulation results. Then, a computational fluid dynamics (CFD) simulation programme, so-called DEMEST, is developed. Here, the fluid-solid, particle-particle and particle-wall interactions are modeled by tracking all individual particles. To this purpose, the deterministic Euler-Lagrange/Discrete Element Method (DEM) is applied and further improved. An emphasis is given to the determination of inter-phase values, such as volumetric void fraction, momentum and heat transfers, using a new procedure known as the offset-method and to the particle-grid method allowing the refinement of the grid resolution independently from particle size. Model validation is described in detail. Moreover, thermochemical reaction models for solid fuel combustion are developed based on quasi-single-phase, two-fluid and Euler-Lagrange/MP-PIC models. Measurements obtained from actual power plants are used for validation and comparison of the developed numerical models.

Download or read book EPA Journal written by and published by . This book was released on 1985 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: