Download or read book Eco efficiency of Grinding Processes and Systems written by Marius Winter and published by Springer. This book was released on 2015-12-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph aims at presenting an integrated assessment approach to describe, model, evaluate and improve the eco-efficiency of existing and new grinding processes and systems. Various combinations of grinding process parameters and system configurations can be evaluated based on the eco-efficiency. The book presents the novel concept of empirical and physical modeling of technological, economic and environmental impact indicators. This includes the integrated evaluation of different grinding process and system scenarios. The book is a valuable read for research experts and practitioners in the field of eco-efficiency of manufacturing processes but the book may also be beneficial for graduate students.

Download or read book Planning of Eco efficient Process Chains for Automotive Component Manufacturing written by Christopher Schmidt and published by Springer Nature. This book was released on 2021-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the introduction of emerging manufacturing technologies and planning cases with established technologies. The planning of eco-efficient process chains is crucial for manufacturing companies. However, in the state-of-the-art planning, various barriers exist towards the integration of the environmental dimension. Against this background, a concept for the integration of classic lean and environmental criteria into the three planning phases of process chains is presented. During concept planning, the Technology Assessment Tool supports planners in the identification of eco-efficient technologies. During rough planning, the Value Stream Design Tool enables the derivation of a production line based on workpiece characteristics. For detailed planning, tools for eco-efficient machine and process chain configuration are provided. Three case studies from large-scale automotive component manufacturing with established and emerging technologies demonstrate the tool applicability.

Download or read book Energy Efficiency of Manufacturing Processes and Systems written by Konstantinos Salonitis and published by MDPI. This book was released on 2020-11-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the important issue of the energy efficiency of both manufacturing processes and systems. Manufacturing is responsible for one-third of global energy consumption and CO2 emissions. Thus, improving the energy efficiency of production has been the focus of research in recent years. Energy efficiency has begun to be considered as one of the key decision-making attributes for manufacturing. This book includes recent studies on methods for the measurement of energy efficiency, tools and techniques for the analysis and development of improvements with regards to energy consumption, modeling and simulation of energy efficiency, and the integration of green and lean manufacturing. This book presents a breadth of relevant information, material, and knowledge to support research, policy-making, practices, and experience transferability to address the issues of energy efficiency.

Download or read book Model Based Approach for Energy and Resource Efficient Machining Systems written by Nadine Madanchi and published by Springer Nature. This book was released on 2021-11-08 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concept to analyze and increase the energy and resource efficiency of machining systems. Machining systems are widely used to produce workpieces in large quantities and with complex geometrical shapes. These systems, however, are also relevant in terms of energy and resource consumption, which is strongly connected to the choice of cutting fluid strategy. Within the focus of the concept, cutting fluid connects the elements of the machining system and results in interactions between them. Based on this description and an extensive literature review, a modeling approach is developed that comprises the relations between process parameters, cutting fluid strategies, and relevant machining system elements. The performance of the machining system is assessed with regard to environmental, economic as well as technological indicators and improved by various organizational and technical measures. The exemplary application of the developed concept is carried out in the context of two case studies and also indicates the corresponding effects of improvement measures.

Download or read book Resource Efficiency in Manufacturing Value Chains written by Stefan Alexander Blume and published by Springer Nature. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a concept for fostering resource efficient manufacturing. The protection of our environment demands a more responsible use of natural resources, and a higher degree of transparency along manufacturing value chains will be required in order to make significant advances in this context. Industrial decision makers must be provided with adequate methods and tools to simultaneously and systematically pursue technical, economic and environmental targets. Building on established and complementary methods, such as material and energy flow analysis (MEFA), value stream mapping (VSM), life cycle costing (LCC) and environmental life cycle assessment (LCA), this book introduces a concept that allows a holistic modeling and multi-dimensional performance assessment of manufacturing systems on different levels – from processes up to entire value chains and product life cycles. It also demonstrates the application of the concept using two case studies from the metal mechanic industry.

Download or read book Energy Efficiency in Manufacturing Systems written by Sebastian Thiede and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

Download or read book Selected paper from 6th International Conference on Renewable Energy Sources ICoRES 2019 written by Marcin Jewiarz and published by MDPI. This book was released on 2020-11-23 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thank you for reaching for this book. It is a summary of the research presented at the 6th International Conference on Renewable Energy Sources (ICORES19), which took place in Krynica, Poland, in June 2019. This event is the most recognizable scientific meeting connected to RES in Poland. From the very beginning, this conference has been a unique occasion for gathering Polish and international researchers’ perspectives on renewable energy sources and balancing them against governmental policy considerations. Accordingly, the conference has also offered panels to discuss best practices and solutions with local entrepreneurs and federal government bodies. The meeting attracts not only scientists but also industry representatives, as well as local and federal government personnel. We are open to new and fresh ideas concerning renewable energy, which is why so many scientists from Central and Eastern Europe visit Krynica to discuss the “Green Future” of this region. In 2019, the conference was organized by the University of Agriculture in Krakow, in cooperation with the AGH University of Science and Technology (Krakow), the State Agrarian and Engineering University in Podilya, the University of Žilina, the International Commission of Agricultural and Biosystems Engineering (CIGR) and the Polish Society of Agricultural Engineering. Honorary auspices were made by the Ministry of Science and Higher Education of the Republic of Poland, the rector of the University of Agriculture in Krakow, the rector of the AGH University of Science and Technology and the rector of the State Agrarian and Engineering University in Podilya.

Download or read book Sustainability in the Mineral and Energy Sectors written by Sheila Devasahayam and published by CRC Press. This book was released on 2016-09-15 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable practices within the mining and energy sectors are assuming greater significance due to uncertainty and change within the global economy and safety, security, and health concerns. This book examines sustainability issues facing the mining and energy sectors by addressing six major themes: Mining and Mineral Processing; Metallurgy and Recycling; Environment; Energy; Socioeconomic and Regulatory; and Sustainable Materials and Fleets. Emphasizing an integrated transdisciplinary approach, it deliberates on optimizing mining productivity and energy efficiency and discusses integrated waste management practices. It discusses risk management, cost cutting, and integration of sustainable practices for long-term business value. It gives a comprehensive outlook for sustainable mineral futures from academic and industry perspectives covering mine to mill optimization, waste, risk and water management, improved efficiencies in mining tools and equipment, and performance indicators for sustainable developments. It covers how innovation and research underpin management of natural resources including sustainable carbon management. •Focuses on mining and mineral processing, metallurgy and recycling, the environment, energy, socioeconomic and regulatory issues, and sustainable materials and fleets. •Describes metallurgy and recycling and uses economic, environmental and social parameter analyses to identify areas for improvement in iron, steel, aluminium, lead, zinc, copper, and gold production. •Discusses current research on mining, performance indicators for sustainable development, sustainability in mining equipment, risk and safety management, and renewable energy resources •Covers alternative and conventional energy sources for the mineral sector as well water treatment and remediation and energy sustainability in mining. •Provides an overview of sustainable carbon management. •Offers an interdisciplinary approach with international focus.

Download or read book Sustainable Manufacturing and Remanufacturing Management written by Weidong Li and published by Springer. This book was released on 2018-06-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest research and applications in the fields of sustainable manufacturing and remanufacturing, as well as process planning and optimization technologies. It introduces innovative algorithms, methodologies, industrial case studies and applications. It focuses on two topics: sustainable manufacturing for machining technologies and remanufacturing of waste electronic equipment, and various methods are covered for each one, including macro process planning, dynamic scheduling, selective disassembly planning and cloud-based disassembly planning. The experimental analysis provided for every method explains the benefits, as well as how they are sustainable for various real-world applications. Further, a theoretical analysis and algorithm design is presented for each, accompanied by the contributors’ relevant research, including: • step-by-step guides; • application scenarios; • relevant literature surveys; • implementation details and case studies; and • critical reviews on the relevant technologies. This book is a valuable resource for researchers in sustainable manufacturing, remanufacturing and product lifecycle management communities, as well as practicing engineers and decision-makers in industry and all those interested in sustainable product development. It is also useful reading material for postgraduates and academics wanting to conduct relevant research, and a reference resource for manufacturing engineers developing innovative tools and methodologies.

Download or read book Eco efficient concrete written by G. Habert and published by Elsevier Inc. Chapters. This book was released on 2013-02-04 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the current focus on sustainability, it is necessary to evaluate cement’s environmental impact properly, especially when developing new ‘green’ concrete types. Therefore, this chapter investigates the available literature on every process concerned during the production of cement. Inventory data on energy use, CO2, PM10, SOx and NOx emissions are collected. Alternatives and improvement are briefly described regarding energy performance and mineralogy changes that it induces for clinker.

Download or read book Efficiency of Manufacturing Processes written by Wen Li and published by Springer. This book was released on 2015-06-13 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a reliable methodology for characterising the energy and eco-efficiency of unit manufacturing processes. The Specific Energy Consumption, SEC, will be identified as the key indicator for the energy efficiency of unit processes. An empirical approach will be validated on different machine tools and manufacturing processes to depict the relationship between process parameters and energy consumptions. Statistical results and additional validation runs will corroborate the high level of accuracy in predicting the energy consumption. In relation to the eco-efficiency, the value and the associated environmental impacts of manufacturing processes will also be discussed. The interrelationship between process parameters, process value and the associated environmental impact will be integrated in the evaluation of eco-efficiency. The book concludes with a further investigation of the results in order to develop strategies for further efficiency improvement. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

Download or read book Quantitative Analysis and Optimal Control of Energy Efficiency in Discrete Manufacturing System written by Yan Wang and published by Springer Nature. This book was released on 2020-06-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides energy efficiency quantitative analysis and optimal methods for discrete manufacturing systems from the perspective of global optimization. In order to analyze and optimize energy efficiency for discrete manufacturing systems, it uses real-time access to energy consumption information and models of the energy consumption, and constructs an energy efficiency quantitative index system. Based on the rough set and analytic hierarchy process, it also proposes a principal component quantitative analysis and a combined energy efficiency quantitative analysis. In turn, the book addresses the design and development of quantitative analysis systems. To save energy consumption on the basis of energy efficiency analysis, it presents several optimal control strategies, including one for single-machine equipment, an integrated approach based on RWA-MOPSO, and one for production energy efficiency based on a teaching and learning optimal algorithm. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of discrete manufacturing systems.

Download or read book Maintaining Sustainable Accounting Systems in Small Business written by Carvalho, Luísa Cagica and published by IGI Global. This book was released on 2018-06-15 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accounting systems and sustainability management are vital for company management and performance. This is particularly difficult for small businesses. As such, it is necessary to understand the features and issues of sustainable accounting systems, with a particular focus on small business. Maintaining Sustainable Accounting Systems in Small Business is a critical scholarly resource that explores sustainability accounting systems with small businesses and how the economic, social, and environmental aspects are related to each other in the company’s management and performance. Featuring coverage on a broad range of topics such as management control system, integrated reporting, and small and medium enterprises, this book is geared towards entrepreneurs, business managers, academicians, business professionals, and graduate-level students seeking practical information about the different sustainable accounting systems from strategic, organizational, and accounting perspectives.

Download or read book Re engineering Manufacturing for Sustainability written by Andrew Y. C. Nee and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.

Download or read book Sustainable Design and Manufacturing 2016 written by Rossi Setchi and published by Springer. This book was released on 2016-04-02 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volumes consists of 59 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-16) held in Chania, Crete Greece in April 2016. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. SDM-16 covers a wide range of topics from sustainable product design and service innovation, sustainable process and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of societal impact of sustainability including research for circular economy. Application areas are wide and varied. The book will provide an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Grind Hardening Process written by Konstantinos Salonitis and published by Springer. This book was released on 2015-05-25 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the grind-hardening process and the main studies published since it was introduced in 1990s. The modelling of the various aspects of the process, such as the process forces, temperature profile developed, hardness profiles, residual stresses etc. are described in detail. The book is of interest to the research community working with mathematical modeling and optimization of manufacturing processes.

Download or read book Manufacturing Driving Circular Economy written by Holger Kohl and published by Springer Nature. This book was released on 2023-05-27 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. It gathers the proceedings of the 18th Global Conference on Sustainable Manufacturing, held on October 5-7, 2022, as a hybrid event, in/from Berlin, Germany. With a focus on manufacturing advances and practices driving the circular economy, the chapters selected for this book report on sustainable manufacturing technologies for the mobility, energy and construction sector, and for machines and equipments, covering applications of artificial intelligence and industry 4.0. Moreover, they discuss energy-efficient process, waste reuse, and CO2 neutral production, giving a special emphasis to developing sustainable manufacturing in emerging countries. This book offers extensive and timely information for both researchers and professionals in the field of manufacturing and business development.