Download or read book Ion Implantation in Diamond Graphite and Related Materials written by M.S. Dresselhaus and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon has always been a unique and intriguing material from a funda mental standpoint and, at the same time, a material with many technological uses. Carbon-based materials, diamond, graphite and their many deriva tives, have attracted much attention in recent years for many reasons. Ion implantation, which has proven to be most useful in modifying the near surface properties of many kinds of materials, in particular semiconductors, has also been applied to carbon-based materials. This has yielded, mainly in the last decade, many scientifically interesting and technologically impor tant results. Reports on these studies have been published in a wide variety of journals and topical conferences, which often have little disciplinary overlap, and which often address very different audiences. The need for a review to cover in an integrated way the various diverse aspects of the field has become increasingly obvious. Such a review should allow the reader to get an overview of the research that has been done thus far, to gain an ap preciation of the common features in the response of the various carbon to ion impact, and to become aware of current research oppor allotropes tunities and unresolved questions waiting to be addressed. Realizing this, and having ourselves both contributed to the field, we decided to write a review paper summarizing the experimental and theoretical status of ion implantation into diamond, graphite and related materials.
Download or read book Diamond and Related Materials Research written by Shôta Shimizu and published by . This book was released on 2008 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research from around the world on diamond materials as well as related materials. These include cubic boron nitride and materials with characteristics and properties approaching or possibly exceeding those of diamond.
Download or read book Novel Aspects of Diamond written by Nianjun Yang and published by Springer. This book was released on 2019-04-02 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is in honor of the contribution of Professor Xin Jiang (Institute of Materials Engineering, University of Siegen, Germany) to diamond. The objective of this book is to familiarize readers with the scientific and engineering aspects of CVD diamond films and to provide experienced researchers, scientists, and engineers in academia and industry with the latest developments and achievements in this rapidly growing field. This 2nd edition consists of 14 chapters, providing an updated, systematic review of diamond research, ranging from its growth, and properties up to applications. The growth of single-crystalline and doped diamond films is included. The physical, chemical, and engineering properties of these films and diamond nanoparticles are discussed from theoretical and experimental aspects. The applications of various diamond films and nanoparticles in the fields of chemistry, biology, medicine, physics, and engineering are presented.
Download or read book Ultrananocrystalline Diamond written by Olga A. Shenderova and published by William Andrew. This book was released on 2012-12-31 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrananocrystalline Diamond: Synthesis, Properties, and Applications is a unique practical reference handbook. Written by the leading experts worldwide it introduces the science of UNCD for both the R&D community and applications developers using UNCD in a diverse range of applications from macro to nanodevices, such as energy-saving ultra-low friction and wear coatings for mechanical pump seals and tools, high-performance MEMS/NEMS-based systems (e.g. in telecommunications), the next generation of high-definition flat panel displays, in-vivo biomedical implants, and biosensors. This work brings together the basic science of nanoscale diamond structures, with detailed information on ultra-nanodiamond synthesis, properties, and applications. The book offers discussion on UNCD in its two forms, as a powder and as a chemical vapor deposited film. Also discussed are the superior mechanical, tribological, transport, electrochemical, and electron emission properties of UNCD for a wide range of applications including MEMS/ NEMS, surface acoustic wave (SAW) devices, electrochemical sensors, coatings for field emission arrays, photonic and RF switching, biosensors, and neural prostheses, etc. Ultrananocrystalline Diamond summarises the most recent developments in the nanodiamond field, and presents them in a way that will be useful to the R&D community in both academic and corporate sectors Coverage of both nanodiamond particles and films make this a valuable resource for both the nanotechnology community and the field of thin films / vacuum deposition Written by the world’s leading experts in nanodiamond, this second edition builds on its predecessor’s reputation as the most up-to-date resource in the field
Download or read book Diamond Based Composites written by Mark A. Prelas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-based composites, with their advantages of hardness, high Young's modulus and the like, have demonstrated new and unusual features, such as stability to high temperatures and pressure shocks and a large internal surface that can be controlled to offer customised electrical, magnetic and optical properties, leading to efficient filters, absorbents, sensors and other tools for environmental control and monitoring. The current book covers the synthesis of materials, their characterization and properties, trends in high pressure and high temperature technologies, low pressure technologies, basic principles of DBC material science, and future developments in electronics, optics, industrial tools and components, biotechnology, and medicine. Wide band-gap materials are considered, ranging from molecular clusters, nanophase materials, growth, processing and synthesis. The processing of composite based materials can be classified into six basic methods: in situ growth, high pressure/high temperature catalytic conversion; mix and sinter (c-BN plus metal-ceramic polymer mix); direct sintering; direct polymorphic conversion; shock detonation; and SHS sintering.
Download or read book Diamond Electronic Properties and Applications written by Lawrence S. Pan and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diamond for electronic applications is not a new idea. As early as the 1920's diamonds were considered for their use as photoconductive detectors. However limitations in size and control of properties naturally limited the use of diamond to a few specialty applications. With the development of diamond synthesis from the vapor phase has come a more serious interest in developing diamond-based electronic devices. A unique combination of extreme properties makes diamond partiCularly well suited for high speed, high power, and high temperature applications. Vapor phase deposition of diamond allows large area films to be deposited, whose properties can potentially be controlled. Since the process of diamond synthesis was first realized, great progress have been made in understanding the issues important for growing diamond and fabricating electronic devices. The quality of both intrinsic and doped diamond has improved greatly to the point that viable applications are being developed. Our understanding of the properties and limitations has also improved greatly. While a number of excellent references review the general properties of diamond, this volume summarizes the great deal of literature related only to electronic properties and applications of diamond. We concentrate only on diamond; related materials such as diamond-like carbon (DLC) and other wide bandgap semiconductors are not treated here. In the first chapter Profs. C. Y. Fong and B. M. Klein discuss the band structure of single-crystal diamond and its relation to electronic properties.
Download or read book SiC Natural and Synthetic Diamond and Related Materials written by A.A. Gippius and published by Elsevier. This book was released on 1992-04-24 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the burgeoning field of wide band gap materials. The 64 contributed and invited papers will do much to stimulate the well-justified ongoing work, both theoretical and experimental, in this area. The high standard of the papers attests to the significant progress that has been made in this field, as well as reporting on the challenging problems that still remain to be solved.
Download or read book MXenes Fundamentals and Applications written by Abdullah M. Asiri and published by Materials Research Forum LLC. This book was released on 2019-06-20 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the very first book on the highly promising topic of MXenes; focusing on their fundamental characteristics and properties, fabrication techniques and applications. MXenes are two-dimensional materials consisting of few atoms thick layers of transition metal carbides or nitrides. These are characterized by high electrical conductivity, good hydrophilicity, chemical stability, and ultrathin 2D sheet-like morphology. Applications in the energy, environmental, biomedical and electronic industries include catalysis, membrane separation, supercapacitors, hybrid-ion capacitors, batteries, flexible electronics, hydrogen storage, nanoelectronics, and sensors.
Download or read book Some Aspects of Diamonds in Scientific Research and High Technology written by Evgeniy Lipatov and published by BoD – Books on Demand. This book was released on 2020-07-08 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers some aspects of diamond-based technologies: CVD diamond synthesis, application of diamond as a material with high hardness and thermal conductivity, and the investigation of charge carrier transport properties of synthetic diamond and chemical properties of diamond surfaces.
Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry. Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.
Download or read book Physics and Applications of CVD Diamond written by Satoshi Koizumi and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs. Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is essential reading for everyone working in environments that involve conventional electronics, biotechnology, quantum computing, quantum cryptography, superconductivity and light emission from highly excited excitonic systems.
Download or read book Diamond and Related Nanostructures written by Mircea Vasile Diudea and published by Springer Science & Business Media. This book was released on 2013-05-28 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past twenty years, the field of carbon structures has been invigorated by the discovery of fullerenes and carbon nanotubes. These nano-structured carbons have attracted a tremendous interest in the fundamental properties of discrete carbon molecules, leading to the discovery of novel complex crystalline and quasi-crystalline materials. As a consequence, a variety of applications have been developed, including technical and bio-medical materials and miniaturized tools. Diamond and Related Nanostructures focuses on the advances in the area of diamond-like carbon nanostructures (hyper-structures built from fullerenes and/or carbon nanotube junctions) and other related carbon nanostructures. Each chapter contributes to the topic from different fields, ranging from theory to synthesis and properties investigation of these new materials. This volume brings together the major findings in the field and provides a source of inspiration and understanding to advanced undergraduates, graduates, and researchers in the fields of Physics, Graph Theory, Crystallography, Computational and Synthetic Chemistry.
Download or read book Nanodiamond written by Oliver A Williams and published by Royal Society of Chemistry. This book was released on 2014-03-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exceptional mechanical, optical, surface and biocompatibility properties of nanodiamond have gained it much interest. Exhibiting the outstanding bulk properties of diamond at the nanoscale in the form of a film or small particle makes it an inexpensive alternative for many applications. Nanodiamond is the first comprehensive book on the subject. The book reviews the state of the art of nanodiamond films and particles covering the fundamentals of growth, purification and spectroscopy and some of its diverse applications such as MEMS, drug delivery and biomarkers and biosensing. Specific chapters include the theory of nanodiamond, diamond nucleation, low temperature growth, diamond nanowires, electrochemistry of nanodiamond, nanodiamond flexible implants, and cell labelling with nanodiamond particles. Edited by a leading expert in nanodiamonds, this is the perfect resource for those new to, and active in, nanodiamond research and those interested in its applications.
Download or read book Engineering Applications of Diamond written by Awadesh Mallik and published by BoD – Books on Demand. This book was released on 2021-08-18 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond offers many advantages over other wide-bandgap materials and thus is a very important material in engineering applications. It can be used in high-speed electronics and response systems as well as high-power laser windows, protective coatings, electrochemical sensors, and more. This book examines the properties, advantages, and potential applications of diamonds in engineering and other fields.
Download or read book Status and Applications of Diamond and Diamond Like Materials written by National Research Council and published by National Academies Press. This book was released on 1990-02-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent discoveries enabling the growth of crystalline diamond by chemical vapor deposition offer the potential for a wide variety of new applications. This new book examines the state of the technology arising from these discoveries in relation to other allied materials, such as high-pressure diamond and cubic boron nitride. Most of the potential defense, space, and commercial applications are related to diamond's hardness, but some utilize its other qualities, such as optical and electronic properties. The authors review growth processes and discuss techniques for characterizing the resulting materials' properties. Crystalline diamond is emphasized, but other diamond-like materials (e.g. silicon carbide and amorphous carbon containing hydrogen) are also examined. In addition, the authors identify scientific, technical, and economic problems that could impede the rapid exploitation of these materials, and present recommendations covering broad areas of research and development.
Download or read book Quantum Information Processing with Diamond written by Steven Prawer and published by Elsevier. This book was released on 2014-05-12 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond nitrogen vacancy (NV) color centers can transform quantum information science into practical quantum information technology, including fast, safe computing. Quantum Information Processing with Diamond looks at the principles of quantum information science, diamond materials, and their applications. Part one provides an introduction to quantum information processing using diamond, as well as its principles and fabrication techniques. Part two outlines experimental demonstrations of quantum information processing using diamond, and the emerging applications of diamond for quantum information science. It contains chapters on quantum key distribution, quantum microscopy, the hybridization of quantum systems, and building quantum optical devices. Part three outlines promising directions and future trends in diamond technologies for quantum information processing and sensing. Quantum Information Processing with Diamond is a key reference for R&D managers in industrial sectors such as conventional electronics, communication engineering, computer science, biotechnology, quantum optics, quantum mechanics, quantum computing, quantum cryptology, and nanotechnology, as well as academics in physics, chemistry, biology, and engineering. Brings together the topics of diamond and quantum information processing Looks at applications such as quantum computing, neural circuits, and in vivo monitoring of processes at the molecular scale
Download or read book Optical Properties of Diamond written by A.M. Zaitsev and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the most comprehensive compilation of data on the optical properties of diamond ever written. It presents a multitude of data previously for the first time in English. The author provides quick access to the most comprehensive information on all aspects of the field.
