Download or read book Dft Dfd written by Nikhil Rahagude and published by LAP Lambert Academic Publishing. This book was released on 2011-02 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: While conventional test point insertions commonly used in design for testability can improve fault coverage, the test points selected may not necessarily be the best candidates to aid silicon diagnosis. This book targets test point insertions to detect more faults as well as to distinguish currently indistinguishable fault-pairs. This is achieved by identifying those points in the circuit, which are not only hard-to-test but also lie on distinguishable frontiers, as Testability-Diagnosability (TD) points. To this end, a novel low-cost metric to identify such TD points is proposed. Further, a new DFT + DFD architecture is developed, which adds just one pin (to identify test/functional mode) and small additional combinational logic to the circuit under test. In the other part, improving diagnosis in BIST environment is targeted. To facilitate diagnosis, researchers have proposed the use of two additional on-chip embedded memories, response memory to store reference responses and fail memory to store failing responses. In this book, a novel architecture is proposed which requires only one additional memory and responses of only a small subset of available test patterns are stored.

Download or read book Understanding Logic Locking written by Kimia Zamiri Azar and published by Springer Nature. This book was released on 2023-10-24 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the breadth and depth of IP protection through logic locking, considering both attacker/adversary and defender/designer perspectives. The authors draw a semi-chronological picture of the evolution of logic locking during the last decade, gathering and describing all the DO’s and DON’Ts in this approach. They describe simple-to-follow scenarios and guide readers to navigate/identify threat models and design/evaluation flow for further studies. Readers will gain a comprehensive understanding of all fundamentals of logic locking.

Download or read book Digital Signal Processing System Design written by Nasser Kehtarnavaz and published by Elsevier. This book was released on 2011-08-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing System Design combines textual and graphical programming to form a hybrid programming approach, enabling a more effective means of building and analyzing DSP systems. The hybrid programming approach allows the use of previously developed textual programming solutions to be integrated into LabVIEW’s highly interactive and visual environment, providing an easier and quicker method for building DSP systems. This book is an ideal introduction for engineers and students seeking to develop DSP systems in quick time. Features: The only DSP laboratory book that combines textual and graphical programming 12 lab experiments that incorporate C/MATLAB code blocks into the LabVIEW graphical programming environment via the MathScripting feature Lab experiments covering basic DSP implementation topics including sampling, digital filtering, fixed-point data representation, frequency domain processing Interesting applications using the hybrid programming approach, such as a software-defined radio system, a 4-QAM Modem, and a cochlear implant simulator The only DSP project book that combines textual and graphical programming 12 Lab projects that incorporate MATLAB code blocks into the LabVIEW graphical programming environment via the MathScripting feature Interesting applications such as the design of a cochlear implant simulator and a software-defined radio system

Download or read book VLSI Test Principles and Architectures written by Laung-Terng Wang and published by Elsevier. This book was released on 2006-08-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. Most up-to-date coverage of design for testability. Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.

Download or read book DIGITAL SIGNAL PROCESSING written by B. SOMANATHAN NAIR and published by PHI Learning Pvt. Ltd.. This book was released on 2004-01-01 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for a one-semester course in Digital Signal Processing and Filter Design is suitable for undergraduate students of Electrical and Electronics Engineering, Electronics and Instrumentation Engineering, Instrumentation and Control Engineering, Electronics and Communication Engineering, Computer Science and Engineering, and Information Technology. Besides, it will also be a useful text for students pursuing applied sciences degree courses in Electronics, Computer Science, Computer Applications, and Information Technology. Though DSP is often treated as a complicated theoretical subject, this book through several worked examples strives to provide a motivating introduction to fundamental concepts, principles and applications of DSP. Building on the basic theory of DSP, the transformations techniques of signals such as Discrete-Time Fourier Transform (DTFT), Discrete Fourier Transform (DFT), Fast-Fourier Transform (FFT), and z-transform are discussed in detail. Several chapters are devoted to design and practical implementation schemes of analog and digital filters. The design of IIR filters using the Butterworth, Chebyshev, and Inverse Chebyshev approximations is illustrated. The design of FIR filters based on the Fourier-series and frequency-sampling methods, is discussed. Owing to their importance in DSP, the differential and difference equations are discussed in the penultimate chapter. The final chapter describes some of the practical applications of DSP.

Download or read book System on Chip Security written by Farimah Farahmandi and published by Springer Nature. This book was released on 2019-11-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a wide variety of System-on-Chip (SoC) security threats and vulnerabilities, as well as their sources, in each stage of a design life cycle. The authors discuss a wide variety of state-of-the-art security verification and validation approaches such as formal methods and side-channel analysis, as well as simulation-based security and trust validation approaches. This book provides a comprehensive reference for system on chip designers and verification and validation engineers interested in verifying security and trust of heterogeneous SoCs.

Download or read book Information Technology Encyclopedia and Acronyms written by Ejub Kajan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early days of information technology, professionals have developed an extraordinary huge amount of jargon, full of acronyms. This dictionary resolves more than 4,000 broadly used acronyms. It provides concise information, illustrated explanations, and numerous cross-references for the majority of technical terms. Most entries for acronyms that are associated with organizations, corporations, and conferences include Web links. All in all, the book constitutes an encyclopaedic documentation of information and communication technology organized by acronyms. An invaluable reference work for anybody who wants to stay on top of today's fast growing language of information technology.

Download or read book Hardware Security written by Swarup Bhunia and published by Morgan Kaufmann. This book was released on 2018-10-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardware Security: A Hands-On Learning Approach provides a broad, comprehensive and practical overview of hardware security that encompasses all levels of the electronic hardware infrastructure. It covers basic concepts like advanced attack techniques and countermeasures that are illustrated through theory, case studies and well-designed, hands-on laboratory exercises for each key concept. The book is ideal as a textbook for upper-level undergraduate students studying computer engineering, computer science, electrical engineering, and biomedical engineering, but is also a handy reference for graduate students, researchers and industry professionals. For academic courses, the book contains a robust suite of teaching ancillaries. Users will be able to access schematic, layout and design files for a printed circuit board for hardware hacking (i.e. the HaHa board) that can be used by instructors to fabricate boards, a suite of videos that demonstrate different hardware vulnerabilities, hardware attacks and countermeasures, and a detailed description and user manual for companion materials. Provides a thorough overview of computer hardware, including the fundamentals of computer systems and the implications of security risks Includes discussion of the liability, safety and privacy implications of hardware and software security and interaction Gives insights on a wide range of security, trust issues and emerging attacks and protection mechanisms in the electronic hardware lifecycle, from design, fabrication, test, and distribution, straight through to supply chain and deployment in the field

Download or read book System on Chip Test Architectures written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2010-07-28 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics testing has a legacy of more than 40 years. The introduction of new technologies, especially nanometer technologies with 90nm or smaller geometry, has allowed the semiconductor industry to keep pace with the increased performance-capacity demands from consumers. As a result, semiconductor test costs have been growing steadily and typically amount to 40% of today's overall product cost. This book is a comprehensive guide to new VLSI Testing and Design-for-Testability techniques that will allow students, researchers, DFT practitioners, and VLSI designers to master quickly System-on-Chip Test architectures, for test debug and diagnosis of digital, memory, and analog/mixed-signal designs. Emphasizes VLSI Test principles and Design for Testability architectures, with numerous illustrations/examples. Most up-to-date coverage available, including Fault Tolerance, Low-Power Testing, Defect and Error Tolerance, Network-on-Chip (NOC) Testing, Software-Based Self-Testing, FPGA Testing, MEMS Testing, and System-In-Package (SIP) Testing, which are not yet available in any testing book. Covers the entire spectrum of VLSI testing and DFT architectures, from digital and analog, to memory circuits, and fault diagnosis and self-repair from digital to memory circuits. Discusses future nanotechnology test trends and challenges facing the nanometer design era; promising nanotechnology test techniques, including Quantum-Dots, Cellular Automata, Carbon-Nanotubes, and Hybrid Semiconductor/Nanowire/Molecular Computing. Practical problems at the end of each chapter for students.

Download or read book Hardware IP Security and Trust written by Prabhat Mishra and published by Springer. This book was released on 2017-01-02 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of current Intellectual Property (IP) based System-on-Chip (SoC) design methodology and highlights how security of IP can be compromised at various stages in the overall SoC design-fabrication-deployment cycle. Readers will gain a comprehensive understanding of the security vulnerabilities of different types of IPs. This book would enable readers to overcome these vulnerabilities through an efficient combination of proactive countermeasures and design-for-security solutions, as well as a wide variety of IP security and trust assessment and validation techniques. This book serves as a single-source of reference for system designers and practitioners for designing secure, reliable and trustworthy SoCs.

Download or read book Advances in Visual Data Compression and Communication written by Feng Wu and published by CRC Press. This book was released on 2014-07-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual information is one of the richest and most bandwidth-consuming modes of communication. To meet the requirements of emerging applications, powerful data compression and transmission techniques are required to achieve highly efficient communication, even in the presence of growing communication channels that offer increased bandwidth. Presenting the results of the author’s years of research on visual data compression and transmission, Advances in Visual Data Compression and Communication: Meeting the Requirements of New Applications provides a theoretical and technical basis for advanced research on visual data compression and communication. The book studies the drifting problem in scalable video coding, analyzes the reasons causing the problem, and proposes various solutions to the problem. It explores the author’s Barbell-based lifting coding scheme that has been adopted as common software by MPEG. It also proposes a unified framework for deriving a directional transform from the nondirectional counterpart. The structure of the framework and the statistic distribution of coefficients are similar to those of the nondirectional transforms, which facilitates subsequent entropy coding. Exploring the visual correlation that exists in media, the text extends the current coding framework from different aspects, including advanced image synthesis—from description and reconstruction to organizing correlated images as a pseudo sequence. It explains how to apply compressive sensing to solve the data compression problem during transmission and covers novel research on compressive sensor data gathering, random projection codes, and compressive modulation. For analog and digital transmission technologies, the book develops the pseudo-analog transmission for media and explores cutting-edge research on distributed pseudo-analog transmission, denoising in pseudo-analog transmission, and supporting MIMO. It concludes by considering emerging developments of information theory for future applications.

Download or read book Mathematics for Physics written by Michael M. Woolfson and published by Oxford University Press. This book was released on 2007 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics for Physics features both print and online support, with many in-text exercises and end-of-chapter problems, and web-based computer programs, to both stimulate learning and build understanding.

Download or read book Digital Pictures written by Arun Netravali and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: For thousands of years mankind has been creating pictures which attempt to portray real or imagined scenes as perceived by human vision. Cave drawings, paintings and photographs are able to stimulate the visual system and conjure up thoughts of faraway places, imagined situations or pleasant sensations. The art of motion picture creation has advanced to the point where viewers often undergo intense emotional experiences. On-the spot news coverage gives the impression of actually witnessing events as they unfold. Relatively recently, other forms of visual information have been invented which do not, in themselves, stimulate the eye. For example, vol tage variations in an electrical signal, as in television, can represent in analogous fashion the brightness variations in a picture. In this form the visual information can be stored on magnetic tape or transmitted over long distances, and, at least for engineering purposes, it is often much more use ful than other forms which do stimulate human vision. With the evolution of digital techniques for information processing, storage, and transmission, the need arises for digital representation of visual information, that is, the representation of images by a sequence of integer numbers (usually binary). In this form, computer processing and digital circuit techniques can be utilized which were undreamed of only a short time ago. Machine manipulation and interpretation of visual infor mation becomes possible. Sophisticated techniques can be employed for efficient storage of images. And processing methods can be used to significantly reduce the costs of picture transmission.

Download or read book SAS Programming for Researchers and Social Scientists written by Paul E. Spector and published by SAGE. This book was released on 2001-04-20 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second Edition SAS® PROGRAMMING FOR RESEARCHERS AND SOCIAL SCIENTISTS By PAUL E. SPECTOR, University of South Florida University of South Florida "Just what the novice SAS programmer needs, particularly those who have no real programming experience. For example, branching is one of the more difficult programming commands for students to implement and the author does an excellent job of explaining this topic clearly and at a basic level. A big plus is the Common Errors section since students will definitely encounter errors." a?Robert Pavur, Management Science, University of North Texas The book that won accolades from thousands has been completely revised! Taking a problem solving approach that focuses on common programming tasks that social scientists encounter in doing data analysis, Spector uses sample programs and examples from social science problems to show readers how to write orderly programs and avoid excessive and disorganized branching. He provides readers with a three-step approach (preplanning, writing the program, and debugging) and tips about helpful features and practices as well as how to avoid certain pitfalls. "Spector has done an excellent job in explaining a somewhat difficult topic in a clear and concise manner. I like the fact that screen captures are included. It allows students to better follow what is being described in the book in relation to what is on the screen." a?Philip Craiger, Computer Science, University of Nebraska, Omaha ThisA bookA provides readers with even more practical tips and advice. New features in this edition include: *New sections on debugging in each chapter that provide advice about common errors *End of chapter Debugging Exercises that offer readers the chance to practice spotting the errors in the sample programs *New section in Chapter 1 on how to use the interface, including how to work with three separate windows, where to write the program, executing the program, managing the program files, and using the F key *Five new appendices, including a Glossary of Programming Terms, A Summary of SAS Language Statements, A Summary of SAS PROCs, Information Sources for SAS PROCs, and Corrections for the Debugging Exercises *Plus, a link to Spector's online SAS course! Appropriate for readers with little or no knowledge of the SAS language, this book will enable readers to run each example, adapt the examples to real problems that the reader may have, and create a program. "A solid introduction to programming in SAS, with a good, brief explanation of how that process differs from the usual point-and-click of Windows-based software such as SPSS and a spreadsheet. Even uninformed students can use it as a guide to creating SAS datasets, manipulating them, and writing programs in the SAS language that will produce all manner of statistical results." a?James P. Whittenburg, History, College of William & Mary A "Bridges the gap between programming syntax and programming applications. In contrast to other books on SAS programming, this book combines a clear explanation of the SAS language with a problem-solving approach to writing a SAS program. It provides the novice programmer with a useful and meaningful model for solving the types of programming problems encountered by re

Download or read book Digital Systems Design with FPGAs and CPLDs written by Ian Grout and published by Elsevier. This book was released on 2011-04-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Systems Design with FPGAs and CPLDs explains how to design and develop digital electronic systems using programmable logic devices (PLDs). Totally practical in nature, the book features numerous (quantify when known) case study designs using a variety of Field Programmable Gate Array (FPGA) and Complex Programmable Logic Devices (CPLD), for a range of applications from control and instrumentation to semiconductor automatic test equipment.Key features include:* Case studies that provide a walk through of the design process, highlighting the trade-offs involved.* Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.With this book engineers will be able to:* Use PLD technology to develop digital and mixed signal electronic systems* Develop PLD based designs using both schematic capture and VHDL synthesis techniques* Interface a PLD to digital and mixed-signal systems* Undertake complete design exercises from design concept through to the build and test of PLD based electronic hardwareThis book will be ideal for electronic and computer engineering students taking a practical or Lab based course on digital systems development using PLDs and for engineers in industry looking for concrete advice on developing a digital system using a FPGA or CPLD as its core. Case studies that provide a walk through of the design process, highlighting the trade-offs involved. Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.

Download or read book Z39 50 Implementation Experiences written by Paul Over and published by . This book was released on 1995 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design for Testability Debug and Reliability written by Sebastian Huhn and published by Springer Nature. This book was released on 2021-04-19 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several novel approaches to pave the way for the next generation of integrated circuits, which can be successfully and reliably integrated, even in safety-critical applications. The authors describe new measures to address the rising challenges in the field of design for testability, debug, and reliability, as strictly required for state-of-the-art circuit designs. In particular, this book combines formal techniques, such as the Satisfiability (SAT) problem and the Bounded Model Checking (BMC), to address the arising challenges concerning the increase in test data volume, as well as test application time and the required reliability. All methods are discussed in detail and evaluated extensively, while considering industry-relevant benchmark candidates. All measures have been integrated into a common framework, which implements standardized software/hardware interfaces.