Download or read book Balancing Techniques for High speed Flexible Rotors written by A. J. Smalley and published by . This book was released on 1978 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Balancing of High Speed Machinery written by Mark S. Darlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern rotating machinery, particularly turbomachinery, is frequently being designed to operate at higher speeds than in the past. Consequently, there is an increased need to balance high-speed rotors. The purpose of this book is to provide the engineering student or practicing engineer with a single, complete reference on high-speed rotor balancing. To this end, a detailed analytical background and practical application procedures are presented for each of the principal high-speed rotor balancing methods, i.e. modal balancing, influence coefficient balancing and the Unified Balancing Approach. This information is supplemented and supported through a presentation of the theoretical development of synchronous rotor vibration and a brief overview of rigid rotor balancing techniques and machines. This is the first time this material is available in a single, concise volume, together with detailed descriptions of application procedures.
Download or read book Development of High speed Balancing Technology written by and published by . This book was released on 1981 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear and Nonlinear Rotordynamics written by Yukio Ishida and published by John Wiley & Sons. This book was released on 2013-03-05 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging treatment of fundamental rotordynamics in order to serve engineers with the necessary knowledge to eliminate various vibration problems. New to this edition are three chapters on highly significant topics: Vibration Suppression - The chapter presents various methods and is a helpful guidance for professional engineers. Magnetic Bearings - The chapter provides fundamental knowledge and enables the reader to realize simple magnetic bearings in the laboratory. Some Practical Rotor Systems - The chapter explains various vibration characteristics of steam turbines and wind turbines. The contents of other chapters on Balancing, Vibrations due to Mechanical Elements, and Cracked Rotors are added to and revised extensively. The authors provide a classification of rotating shaft systems and general coverage of key ideas common to all branches of rotordynamics. They offers a unique analysis of dynamical problems, such as nonlinear rotordynamics, self-excited vibration, nonstationary vibration, and flow-induced oscillations. Nonlinear resonances are discussed in detail, as well as methods for shaft stability and various theoretical derivations and computational methods for analyzing rotors to determine and correct vibrations. This edition also includes case studies and problems.
Download or read book Vibratory Condition Monitoring of Machines written by J. S. Rao and published by CRC Press. This book was released on 2000 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibratory Condition Monitoring of Machines discusses the basic principles applicable in understanding the vibratory phenomena of rotating and reciprocating machines. It also addresses the defects that influence vibratory phenomenon, instruments and analysis procedures for maintenance, vibration related standards, and the expert systems that help ensure good maintenance programs. The author offers a minimal treatment of the mathematical aspects of the subject, focusing instead on imparting a physical understanding to help practicing engineers develop maintenance programs and operate machines efficiently.
Download or read book Experimental Techniques Rotating Machinery and Acoustics Volume 8 written by James De Clerck and published by Springer. This book was released on 2015-04-09 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Techniques, Rotating Machinery & Acoustics, Volume 8: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015, the eighth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Experimental Techniques Processing Modal Data Rotating Machinery Acoustics Adaptive Structures Biodynamics Damping
Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1979 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1979 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotor and Structural Dynamics of Turbomachinery written by Raj Subbiah and published by Springer. This book was released on 2018-01-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists with practical fundamentals for turbomachinery design. It presents a detailed analysis of existing procedures for the analysis of rotor and structure dynamics, while keeping mathematical equations to a minimum. Specific terminologies are used for rotors and structures, respectively, allowing the readers to clearly distinguish between the two. Further, the book describes the essential concepts needed to understand rotor failure modes due to lateral and torsional oscillations. It guides the reader from simple single-degree-of-freedom models to the most complex multi-degree-of-freedom systems, and provides useful information concerning steel pedestal stiffness degradation and other structural issues. Fluid-film bearing types and their dynamical behavior are extensively covered and discussed in the context of various turbomachinery applications. The book also discusses shaft alignment and rotor balancing from a practical point of view, providing readers with essential information to help them solve practical problems. As the main body of the book focuses on the diagnostics and description of case studies addressing the most pressing practical issues, together with their successful solutions, it offers a valuable reference guide, helping field engineers manage day-to-day issues with turbomachinery.
Download or read book Reciprocating Machinery Dynamics written by Abdulla S. Rangwala and published by New Age International. This book was released on 2006 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Primarily Written To Meet The Needs Of Practicing Engineers In A Large Variety Of Industries Where Reciprocating Machines Are Used, Although All Of The Material Is Suitable For College Undergraduate Level Design Engineering Courses. It Is Expected That The Reader Is Familiar With Basic To Medium Level Calculus Offered At The College Undergraduate Level.The First Chapter Of The Book Deals With Classical Vibration Theory, Starting With A Single Degree Of Freedom System, To Develop Concepts Of Damping, Response And Unbalance. The Second Chapter Deals With Types And Classification Of Reciprocating Machines, While The Third Chapter Discusses Detail-Design Aspects Of Machine Components. The Fourth Chapter Introduces The Dynamics Of Slider And Cranks Mechanism, And Provides Explanation Of The Purpose And Motion Of Various Components.The Fifth Chapter Looks Into Dynamic Forces Created In The System, And Methods To Balance Gas Pressure And Inertia Loads. The Sixth Chapter Explains The Torsional Vibration Theory And Looks At The Different Variables Associated With It. Chapter Seven Analyzes Flexural Vibrations And Lateral Critical Speed Concepts, Together With Journal Bearings And Their Impact On A Rotating System. Advanced Analytical Techniques To Determine Dynamic Characteristics Of All Major Components Of Reciprocating Machinery Are Presented In Chapter Eight. Methods To Mitigate Torsional Vibrations In A Crankshaft Using Absorbers Are Analyzed In Close Detail. Various Mechanisms Of Flexural Excitation Sources And Their Response On A Rotor-Bearing System Are Explored. Stability Of A Rotor And Different Destabilizing Mechanisms Are Also Included In This Chapter.Techniques In Vibration Measurement And Balancing Of Reciprocating And Rotating Systems Are Presented In Chapter Nine. Chapter Ten Looks At Computational Fluid Dynamics Aspects Of Flow Through Intake And Exhaust Manifolds, As Well As Fluid Flow Induced Component Vibrations. Chapter Eleven Extends This Discussion To Pressure Pulsations In Piping Attached To Reciprocating Pumps And Compressors. Chapter Twelve Considers The Interaction Between The Structural Dynamics Of Components And Noise, Together With Methods To Improve Sound Quality. Optimized Design Of Components Of Reciprocating Machinery For Specified Parameters And Set Target Values Is Investigated At Length In Chapter Thirteen. Practicing Engineers Interested In Applying The Theoretical Model To Their Own Operating System Will Find Case Histories Shown In Chapter FourteenUseful.
Download or read book Shock and Vibration Monograph Series written by and published by . This book was released on 1986 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Engineering and Technology of Machinery Volume I written by Rajiv Tiwari and published by Springer Nature. This book was released on 2023-12-26 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021). It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.
Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.
Download or read book Case Histories in Vibration Analysis and Metal Fatigue for the Practicing Engineer written by Anthony Sofronas and published by John Wiley & Sons. This book was released on 2012-07-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly accessible book provides analytical methods and guidelines for solving vibration problems in industrial plants and demonstrates their practical use through case histories from the author's personal experience in the mechanical engineering industry. It takes a simple, analytical approach to the subject, placing emphasis on practical applicability over theory, and covers both fixed and rotating equipment, as well as pressure vessels. It is an ideal guide for readers with diverse experience, ranging from undergraduate students to mechanics and professional engineers.
Download or read book 10th International Conference on Vibrations in Rotating Machinery written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-09-11 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines. - Presents latest methods of theoretical, experimental and computational rotordynamics - Covers current issues of concern in the further development of rotating machines
