Download or read book Advances in the iterative coupling between flow geomechanical simulators written by Yuri Nunes Saraiva and published by Editora Dialética. This book was released on 2022-02-08 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical analysis for reservoir engineering scenarios is necessary due to the importance of predict the consequences and products of water or oil exploitation, as well as the vast quantity of variables that are associated with hydraulic engineering, oil, and rock geomechanics. Due to this, the present work consists to show the relative activities for geomechanical coupling and flux simulation based on paper SPE – 79709 of Dean et al. (2006). This way, the used software for coupling was IMEX (2019), in the explicit iterative coupling, with geomechanics and flux model of the same simulator and, posteriorly, was used the geomechanics simulator FLAC3D 6.0 associated with the flux model of IMEX and programming with MATLAB and FISH to transfer the data between simulators. In addition, the results demonstrate the satisfactory obtention of convergence of the problems proposed by Dean et al. (2006), in IMEX with geomechanics. For iterative coupling between FLAC3D and IMEX was obtained good behavior convergence of problem 1. At the end of the simulations, a reservoir model is elaborated based on this problem with the inclusion of a horizontal fracture near the region of the producing well. This type of coupling allows an accurate study with the highest level of complexity and inclusion of variables to reservoir behavior, as the inclusion of fractures and constitutive models.

Download or read book Advances and Technology Development in Greenhouse Gases Emission Capture and Conversion written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-07-13 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion is a comprehensive seven-volume set of books that discusses the composition and properties of greenhouse gases, and introduces different sources of greenhouse gases emission and the relation between greenhouse gases and global warming. The comprehensive and detailed presentation of common technologies as well as novel research related to all aspects of greenhouse gases makes this work an indispensable encyclopedic resource for researchers in academia and industry.Volume 7 titled Process Modelling and Simulation reviews process modelling and simulation. The book reviews modeling studies of GHGs emissions and surveys the details of carbon capture modelling with several well-developed processes such as absorbers, swing technologies, and microstructures. It addresses modelling of geological and ocean storage, and reviews simulation studies of the chemical conversion of carbon dioxide to any valuable materials. The book summarizes essential information required in the simulation and modelling of the processes which are beneficial in carbon capture, storage, or conversion. - Introduces modeling and simulation methods of carbon and methane emission - Describes modeling and simulation procedures of producing chemicals from carbon as well as methane - Discusses modeling and simulation of various technologies for carbon capture

Download or read book Geomechanics in Reservoir Simulation written by Pascal Longuemare and published by Editions TECHNIP. This book was released on 2002 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Modeling with the MATLAB Reservoir Simulation Toolbox written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2021-11-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many leading experts contribute to this follow-up to An Introduction to Reservoir Simulation using MATLAB/GNU Octave: User Guide for the MATLAB Reservoir Simulation Toolbox (MRST). It introduces more advanced functionality that has been recently added to the open-source MRST software. It is however a self-contained introduction to a variety of modern numerical methods for simulating multiphase flow in porous media, with applications to geothermal energy, chemical enhanced oil recovery (EOR), flow in fractured and unconventional reservoirs, and in the unsaturated zone. The reader will learn how to implement new models and algorithms in a robust, efficient manner. A large number of numerical examples are included, all fully equipped with code and data so that the reader can reproduce the results and use them as a starting point for their own work. Like the original textbook, this book will prove invaluable for researchers, professionals and advanced students using reservoir simulation methods. This title is available as Open Access on Cambridge Core.

Download or read book Study of a reluctance magnetic gearbox for energy storage system application written by Bruno Fensterseifer Dias and published by Editora Dialética. This book was released on 2022-02-11 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study of a magnetic gearbox for energy storage system application. Contains simulation results and tests carried out to verify the behavior of the torque output as a function of geometric and operation parameters. Focused on magnetic gearboxes with gains of 10 times or higher operating at high speed.

Download or read book Advanced Petroleum Reservoir Simulation written by M. R. Islam and published by John Wiley & Sons. This book was released on 2016-07-20 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the original volume adds significant new innovations for revolutionizing the processes and methods used in petroleum reservoir simulations. With the advent of shale drilling, hydraulic fracturing, and underbalanced drilling has come a virtual renaissance of scientific methodologies in the oil and gas industry. New ways of thinking are being pioneered, and Dr. Islam and his team have, for years now, been at the forefront of these important changes. This book clarifies the underlying mathematics and physics behind reservoir simulation and makes it easy to have a range of simulation results along with their respective probability. This makes the risk analysis based on knowledge rather than guess work. The book offers by far the strongest tool for engineers and managers to back up reservoir simulation predictions with real science. The book adds transparency and ease to the process of reservoir simulation in way never witnessed before. Finally, No other book provides readers complete access to the 3D, 3-phase reservoir simulation software that is available with this text. A must-have for any reservoir engineer or petroleum engineer working upstream, whether in exploration, drilling, or production, this text is also a valuable textbook for advanced students and graduate students in petroleum or chemical engineering departments.

Download or read book Numerical Mathematics and Advanced Applications ENUMATH 2019 written by Fred J. Vermolen and published by Springer Nature. This book was released on 2021-04-30 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the European Conference on Numerical Mathematics and Advanced Applications (ENUMATH 2019). The conference was organized by Delft University of Technology and was held in Egmond aan Zee, the Netherlands, from September 30 to October 4, 2019. Leading experts in the field presented the latest results and ideas regarding the design, implementation and analysis of numerical algorithms, as well as their applications to relevant societal problems. ENUMATH is a series of conferences held every two years to provide a forum for discussing basic aspects and new trends in numerical mathematics and scientific and industrial applications, all examined at the highest level of international expertise. The first ENUMATH was held in Paris in 1995, with successive installments at various sites across Europe, including Heidelberg (1997), Jyvaskyla (1999), lschia Porto (2001), Prague (2003), Santiago de Compostela (2005), Graz (2007), Uppsala (2009), Leicester (2011), Lausanne (2013), Ankara (2015) and Bergen (2017).

Download or read book Integrating Innovations of Rock Mechanics written by R.J. Rocca and published by IOS Press. This book was released on 2015-12-11 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 8th South American Congress on Rock Mechanics (SCRM), the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), and the 6th International Symposium on Deformation Characteristics of Geomaterials, as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy brought together international experts, researchers, academics, professionals and geo-engineering companies in a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 8th South American Congress on Rock Mechanics (SCRM). Topics covered include rock mechanics, rock engineering, natural resources, mining, mechanics, geology and engineering. Approximately 60% of the contributions are in English, and the remaining 40% of the contributions are in either Spanish or Portuguese.

Download or read book Computer Methods and Recent Advances in Geomechanics written by Fusao Oka and published by CRC Press. This book was released on 2014-09-04 with total page 2049 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Methods and Recent Advances in Geomechanics covers computer methods, material modeling and testing, applications to a wide range of geomechanical issues, and recent advances in various areas that may not necessarily involve computer methods, and will be of interest to researchers and engineers involved in geotechnical mechanics and geo-engineering.

Download or read book Numerical Mathematics and Advanced Applications ENUMATH 2015 written by Bülent Karasözen and published by Springer. This book was released on 2016-11-09 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), held every 2 years, provides a forum for discussing recent advances in and aspects of numerical mathematics and scientific and industrial applications. The previous ENUMATH meetings took place in Paris (1995), Heidelberg (1997), Jyvaskyla (1999), Ischia (2001), Prague (2003), Santiago de Compostela (2005), Graz (2007), Uppsala (2009), Leicester (2011) and Lausanne (2013). This book presents a selection of invited and contributed lectures from the ENUMATH 2015 conference, which was organised by the Institute of Applied Mathematics (IAM), Middle East Technical University, Ankara, Turkey, from September 14 to 18, 2015. It offers an overview of central recent developments in numerical analysis, computational mathematics, and applications in the form of contributions by leading experts in the field.

Download or read book Porous Rock Fracture Mechanics written by Amir Shojaei and published by Woodhead Publishing. This book was released on 2017-05-05 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Rock Failure Mechanics: Hydraulic Fracturing, Drilling and Structural Engineering focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. Chapters focus on advanced topics in the field of rock's fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. Each chapter reflects the current state-of-the-art in terms of the modern use of fracture simulation in industrial and academic sectors. Some of the major contributions in this volume include, but are not limited to: anisotropic elasto-plastic deformation mechanisms in fluid saturated porous rocks, dynamics of fluids transport in fractured rocks and simulation techniques, fracture mechanics and simulation techniques in porous rocks, fluid-structure interaction in hydraulic driven fractures, advanced numerical techniques for simulation of progressive fracture, including multiscale modeling, and micromechanical approaches for porous rocks, and quasi-static versus dynamic fractures in porous rocks. This book will serve as an important resource for petroleum, geomechanics, drilling and structural engineers, R&D managers in industry and academia. - Includes a strong editorial team and quality experts as chapter authors - Presents topics identified for individual chapters are current, relevant, and interesting - Focuses on advanced topics, such as fluid coupled fractures, rock's continuum damage mechanics, and multiscale modeling - Provides a 'one-stop' advanced-level reference for a graduate course focusing on rock's mechanics

Download or read book Poromechanics II written by J.L. Auriault and published by CRC Press. This book was released on 2020-12-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings deal with the fundamentals and applications of poromechanics to geomechanics, material sciences, geophysics, acoustics and biomechanics. They discuss the state of the art in such topics as constitutive modelling and upscaling methods.

Download or read book Advances in the Study of Fractured Reservoirs written by G.H. Spence and published by Geological Society of London. This book was released on 2014-08-27 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Naturally fractured reservoirs constitute a substantial percentage of remaining hydrocarbon resources; they create exploration targets in otherwise impermeable rocks, including under-explored crystalline basement; and they can be used as geological stores for anthropogenic carbon dioxide. Their complex behaviour during production has traditionally proved difficult to predict, causing a large degree of uncertainty in reservoir development. The applied study of naturally fractured reservoirs seeks to constrain this uncertainty by developing new understanding, and is necessarily a broad, integrated, interdisciplinary topic. This book addresses some of the challenges and advances in knowledge, approaches, concepts, and methods used to characterize the interplay of rock matrix and fracture networks, relevant to fluid flow and hydrocarbon recovery. Topics include: describing, characterizing and identifying controls on fracture networks from outcrops, cores, geophysical data, digital and numerical models; geomechanical influences on reservoir behaviour; numerical modelling and simulation of fluid flow; and case studies of the exploration and development of carbonate, siliciclastic and metamorphic naturally fractured reservoirs.

Download or read book Unconventional Tight Reservoir Simulation Theory Technology and Practice written by Qiquan Ran and published by Springer Nature. This book was released on 2020-08-14 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces readers to the simulation theory and techniques of multiple media for unconventional tight reservoirs. It summarizes the macro/microscopic heterogeneities; the features of multiscale multiple media; the characteristics of complex fluid properties; the occurrence state of continental tight oil and gas reservoirs in China; and the complex flow characteristics and coupled production mechanism under unconventional development patterns. It also discusses the simulation theory of multiple media for unconventional tight oil and gas reservoirs; mathematic model of flow through discontinuous multiple media; geological modeling of discrete multiscale multiple media; and the simulation of multiscale, multiphase flow regimes and multiple media. In addition to the practical application of simulation and software for unconventional tight oil and gas, it also explores the development trends and prospects of simulation technology. The book is of interest to scientific researchers and technicians engaged in the development of oil and gas reservoirs, and serves as a reference resource for advanced graduate students in fields related to petroleum.

Download or read book Hydraulic Fracture Modeling written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2017-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today's petroleum engineer with an all-inclusive product to characterize and optimize today's more complex reservoirs. - Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods - Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics - Provides today's petroleum engineer with model validation tools backed by real-world case studies

Download or read book Computational Geomechanics and Hydraulic Structures written by Sheng-Hong Chen and published by Springer. This book was released on 2018-06-21 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research into developing and applying computational tools to estimate the performance and safety of hydraulic structures from the planning and construction stage to the service period. Based on the results of a close collaboration between the author and his colleagues, friends, students and field engineers, it shows how to achieve a good correlation between numerical computation and the actual in situ behavior of hydraulic structures. The book’s heuristic and visualized style disseminates the philosophy and road map as well as the findings of the research. The chapters reflect the various aspects of the three typical and practical methods (the finite element method, the block element method, the composite element method) that the author has been working on and made essential contributions to since the 1980s. This book is an advanced continuation of Hydraulic Structures by the same author, published by Springer in 2015.

Download or read book Hydro Mechanical Coupling and Creep Behaviours of Geomaterials written by Yanlin Zhao and published by Frontiers Media SA. This book was released on 2021-03-03 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: