Download or read book Proceedings of the 3rd International Conference on Electrical and Information Technologies for Rail Transportation EITRT 2017 written by Limin Jia and published by Springer. This book was released on 2018-03-30 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation. The topics cover novel traction drive technologies of rail transportation, safety technology of rail transportation system, rail transportation information technology, rail transportation operational management technology, rail transportation cutting-edge theory and technology etc. The proceedings can be a valuable reference work for researchers and graduate students working in rail transportation, electrical engineering and information technologies.
Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.
Download or read book Analysis and Simulation of Electrical and Computer Systems written by Lesław Gołębiowski and published by Springer. This book was released on 2014-11-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected results of the XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE) which was held in Rzeszów and Czarna, Poland on September 27-30, 2013. The main aim of the Conference was to provide academia and industry to discuss and present the latest technological advantages and research results and to integrate the new interdisciplinary scientific circle in the field of electrical engineering, electronics and mechatronics. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with Rzeszów University of Technology, the Faculty of Electrical and Computer Engineering and Rzeszów University, the Faculty of Mathematics and Natural Sciences.
Download or read book The Proceedings of the 17th Annual Conference of China Electrotechnical Society written by Qingxin Yang and published by Springer Nature. This book was released on 2023-03-28 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the 17th Annual Conference of China Electrotechnical Society, organized by China Electrotechnical Society (CES), held in Beijing, China, from September 17 to 18, 2022. It covers topics such as electrical technology, power systems, electromagnetic emission technology, and electrical equipment. It introduces the innovative solutions that combine ideas from multiple disciplines. The book is very much helpful and useful for the researchers, engineers, practitioners, research students, and interested readers.
Download or read book Electrical Machines written by Dieter Gerling and published by Springer Science & Business Media. This book was released on 2014-09-17 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Machines and Drives play a vital role in industry with an ever increasing importance. This fact necessitates the understanding of machine and drive principles by engineers of many different disciplines. Therefore, this book is intended to give a comprehensive deduction of these principles. Special attention is given to the precise mathematical deduction of the necessary formulae to calculate machines and drives, and to the discussion of simplifications (if applied) with the associated limits. So the book shows how the different machine topologies can be deduced from general fundamentals, and how they are linked. This book addresses graduate students, researchers and developers of Electrical Machines and Drives, who are interested in getting knowledge about the principles of machine and drive operation and in detecting the mathematical and engineering specialties of the different machine and drive topologies together with their mutual links. The detailed, but compact mathematical deduction, together with a distinct emphasis onto assumptions, simplifications and the associated limits, leads to a clear understanding of Electrical Machine and Drive topologies and characteristics.
Download or read book Mathematical Models for the Design of Electrical Machines written by Frédéric Dubas and published by MDPI. This book was released on 2021-03-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.
Download or read book Proceedings of International Conference on Artificial Intelligence Smart Grid and Smart City Applications written by L. Ashok Kumar and published by Springer Nature. This book was released on 2020-03-12 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the complexity, and heterogeneity of the smart grid and the high volume of information to be processed, artificial intelligence techniques and computational intelligence appear to be some of the enabling technologies for its future development and success. The theme of the book is “Making pathway for the grid of future” with the emphasis on trends in Smart Grid, renewable interconnection issues, planning-operation-control and reliability of grid, real time monitoring and protection, market, distributed generation and power distribution issues, power electronics applications, computer-IT and signal processing applications, power apparatus, power engineering education and industry-institute collaboration. The primary objective of the book is to review the current state of the art of the most relevant artificial intelligence techniques applied to the different issues that arise in the smart grid development.
Download or read book Power System Simulation Control and Optimization written by José Antonio Domínguez-Navarro and published by MDPI. This book was released on 2021-06-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Power System Simulation, Control and Optimization” offers valuable insights into the most recent research developments in these topics. The analysis, operation, and control of power systems are increasingly complex tasks that require advanced simulation models to analyze and control the effects of transformations concerning electricity grids today: Massive integration of renewable energies, progressive implementation of electric vehicles, development of intelligent networks, and progressive evolution of the applications of artificial intelligence.
Download or read book Proceedings of the Second International Conference on Mechatronics and Automatic Control written by Wego Wang and published by Springer. This book was released on 2015-08-03 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the second International Conference on Mechatronics and Automatic Control Systems held in Beijing, China on September 20-21, 2014. Examines how to improve productivity through the latest advanced technologies Covering new systems and techniques in the broad field of mechatronics and automatic control systems
Download or read book Emerging Electric Machines written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the concepts and developments of emerging electric machines, including advances, perspectives, and selected applications. It is a helpful tool for practicing engineers concerned with emerging electric machines and their challenges and potential uses. Chapters cover such topics as electric machines with axial magnetic flux, asynchronous machines with dual power supply, new designs for electrical machines, and more.
Download or read book Soft Magnetic Composites in Novel Designs of Electrical Traction Machines written by Zhang, Bo and published by KIT Scientific Publishing. This book was released on 2017-07-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the manufacturing of electrical machines based on electrical steel laminations has been well established worldwide. Compared with the electrical steel, the soft magnetic composites (SMC) shows magnetic isotropy and lower eddy current losses. Thus, it becomes an important impulse promoting the development of new topologies of electrical machine. The application of SMC in the electrical traction machine for hybrid electrical vehicle or electrical vehicle has been researched in the work.
Download or read book Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation written by Limin Jia and published by Springer. This book was released on 2016-03-11 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation. The topics cover intelligent computing, information processing, communication technology, automatic control, and their applications in rail transportation etc. The proceedings can be a valuable reference work for researchers and graduate students working in rail transportation, electrical engineering and information technologies.
Download or read book Energy Efficiency in Electric Devices Machines and Drives written by Gorazd Štumberger and published by MDPI. This book was released on 2020-06-18 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue deals with improvements in the energy efficiency of electric devices, machines, and drives, which are achieved through improvements in the design, modelling, control, and operation of the system. Properly sized and placed coils of a welding transformer can reduce the required iron core size and improve the efficiency of the welding system operation. New structures of the single-phase field excited flux switching machine improve its performance in terms of torque, while having higher back-EMF and unbalanced electromagnetic forces. A properly designed rotor notch reduces the torque ripple and cogging torque of interior permanent magnet motors for the drive platform of electric vehicles, resulting in lower vibrations and noise. In the field of modelling, the torque estimation of a Halbach array surface permanent magnet motor with a non-overlapping winding layout was improved by introducing an analytical two-dimensional subdomain model. A general method for determining the magnetically nonlinear two-axis dynamic models of rotary and linear synchronous reluctance machines and synchronous permanent magnet machines is introduced that considers the effects of slotting, mutual interaction between the slots and permanent magnets, saturation, cross saturation, and end effects. Advanced modern control solutions, such as neural network-based model reference adaptive control, fuzzy control, senseless control, torque/speed tracking control derived from the 3D non-holonomic integrator, including drift terms, maximum torque per ampere, and maximum efficiency characteristics, are applied to improve drive performance and overall system operation.
Download or read book Solar Concentrating Modules With Louvered Heliostats Emerging Research and Opportunities written by Strebkov, Dmitry and published by IGI Global. This book was released on 2020-10-30 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of solar energy is becoming increasingly widespread all over the world. One significant way to reduce the cost of energy generated by solar modules, as well as reduce the need for centralized energy supply, is the use of non-tracking concentrator solar modules integrated into the building structure. As this area of engineering gains interest from all sectors, it is crucial to understand how to increase productivity in order to make solar modules an excellent source of energy. Solar Concentrating Modules With Louvered Heliostats: Emerging Research and Opportunities is an essential publication that formulates a scientifically based approach to the development of non-tracking solar modules with a system of linear louvered heliostats and the selection of the operating mode of the developed modules depending on various requirements of the consumer of thermal or electric energy. The proposed design can solve the problem of the lack of space for placing solar energy facilities in the city, as well as provide heat and electricity to consumers in the residential and public sectors and agricultural enterprises. The research results presented in the book can be used in the development of technological schemes and designs of photovoltaic, thermal, and cogeneration power plants with solar energy concentrators. Highlighting a wide range of topics including economic characteristics, artificial intelligence, and applications, this book is ideally designed for engineers, urban planners, policymakers, academicians, researchers, and students.
Download or read book Integration of Distributed Generation in the Power System written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2011-08-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.
Download or read book Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2021-10-07 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition extensively covers advanced issues/subjects in electric machines, starting from principles, to applications and case studies with ample graphical (numerical) results. This textbook is intended for second (and third) semester courses covering topics such as modeling of transients, control principles, electromagnetic and thermal finite element analysis, and optimal design (dimensioning). Notable recent knowledge with strong industrialization potential has been added to this edition, such as: Orthogonal models of multiphase a.c. machines Thermal Finite Element Analysis of (FEA) electric machines FEA–based–only optimal design of a PM motor case study Line start synchronizing premium efficiency PM induction machines Induction machines (three and single phase), synchronous machines with DC excitation, with PM-excitation, and with magnetically salient rotor and a linear Pm oscillatory motor are all investigated in terms of transients, electromagnetic FEM analysis and control principles. Case studies, numerical examples, and lots of discussion of FEM results for PMSM and IM are included throughout the book. The optimal design is treated in detail using Hooke–Jeeves and GA algorithms with case comparison studies in dedicated chapters for IM and PMSM. Numerous computer simulation programs in MATLAB® and Simulink® are available online that illustrate performance characteristics present in the chapters, and the FEM and optimal design case studies (and codes) may be used as homework to facilitate a deeper understanding of fundamental issues.
Download or read book Impedance Source Power Electronic Converters written by Yushan Liu and published by John Wiley & Sons. This book was released on 2016-10-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well as different industrial applications. Provides an overview of existing challenges, solutions and future trends. Supported by calculation examples, simulation models and results. Highly accessible, this is an invaluable resource for researchers, postgraduate/graduate students studying power electronics and its application in industry and renewable energy conversion as well as practising R&D engineers. Readers will be able to apply the presented material for the future design of the next generation of efficient power electronic converters/inverters.
