Download or read book X Ray Line Profile Analysis in Materials Science written by Gubicza, Jen? and published by IGI Global. This book was released on 2014-03-31 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray line profile analysis is an effective and non-destructive method for the characterization of the microstructure in crystalline materials. Supporting research in the area of x-ray line profile analysis is necessary in promoting further developments in this field. X-Ray Line Profile Analysis in Materials Science aims to synthesize the existing knowledge of the theory, methodology, and applications of x-ray line profile analysis in real-world settings. This publication presents both the theoretical background and practical implementation of x-ray line profile analysis and serves as a reference source for engineers in various disciplines as well as scholars and upper-level students.
Download or read book Diffraction Analysis of the Microstructure of Materials written by Eric J. Mittemeijer and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of diffraction methods applied to the analysis of the microstructure of materials. Since crystallite size and the presence of lattice defects have a decisive influence on the properties of many engineering materials, information about this microstructure is of vital importance in developing and assessing materials for practical applications. The most powerful and usually non-destructive evaluation techniques available are X-ray and neutron diffraction. The book details, among other things, diffraction-line broadening methods for determining crystallite size and atomic-scale strain due, e.g. to dislocations, and methods for the analysis of residual (macroscale) stress. The book assumes only a basic knowledge of solid-state physics and supplies readers sufficient information to apply the methods themselves.
Download or read book Thin Film Analysis by X Ray Scattering written by Mario Birkholz and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by Paul F. Fewster and Christoph Genzel While X-ray diffraction investigation of powders and polycrystalline matter was at the forefront of materials science in the 1960s and 70s, high-tech applications at the beginning of the 21st century are driven by the materials science of thin films. Very much an interdisciplinary field, chemists, biochemists, materials scientists, physicists and engineers all have a common interest in thin films and their manifold uses and applications. Grain size, porosity, density, preferred orientation and other properties are important to know: whether thin films fulfill their intended function depends crucially on their structure and morphology once a chemical composition has been chosen. Although their backgrounds differ greatly, all the involved specialists a profound understanding of how structural properties may be determined in order to perform their respective tasks in search of new and modern materials, coatings and functions. The author undertakes this in-depth introduction to the field of thin film X-ray characterization in a clear and precise manner.
Download or read book Materials Science and Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-01-11 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Materials Science and Engineering: Concepts, Methodologies, Tools, and Applications is a compendium of the latest academic material on investigations, technologies, and techniques pertaining to analyzing the synthesis and design of new materials. Through its broad and extensive coverage on a variety of crucial topics, such as nanomaterials, biomaterials, and relevant computational methods, this multi-volume work is an essential reference source for engineers, academics, researchers, students, professionals, and practitioners seeking innovative perspectives in the field of materials science and engineering.
Download or read book Defect Structure and Properties of Nanomaterials written by J Gubicza and published by Woodhead Publishing. This book was released on 2017-03-05 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect Structure and Properties of Nanomaterials: Second and Extended Edition covers a wide range of nanomaterials including metals, alloys, ceramics, diamond, carbon nanotubes, and their composites. This new edition is fully revised and updated, covering important advances that have taken place in recent years. Nanostructured materials exhibit unique mechanical and physical properties compared with their coarse-grained counterparts, therefore these materials are currently a major focus in materials science. The production methods of nanomaterials affect the lattice defect structure (vacancies, dislocations, disclinations, stacking faults, twins, and grain boundaries) that has a major influence on their mechanical and physical properties. In this book, the production routes of nanomaterials are described in detail, and the relationships between the processing conditions and the resultant defect structure, as well as the defect-related properties (e.g. mechanical behavior, electrical resistance, diffusion, corrosion resistance, thermal stability, hydrogen storage capability, etc.) are reviewed. In particular, new processing methods of nanomaterials are described in the chapter dealing with the manufacturing procedures of nanostructured materials. New chapters on (i) the experimental methods for the study of lattice defects, (ii) the defect structure in nanodisperse particles, and (iii) the influence of lattice defects on electrical, corrosion, and diffusion properties are included, to further enhance what has become a leading reference for engineering, physics, and materials science audiences. - Provides a detailed overview of processing methods, defect structure, and defect-related mechanical and physical properties of nanomaterials - Covers a wide range of nanomaterials including metals, alloys, ceramics, diamond, carbon nanotubes, and their composites - Includes new chapters covering recent advances in both processing techniques and methods for the study of lattice defects - Provides valuable information that will help materials scientists and engineers highlight lattice defects and the related mechanical and physical properties
Download or read book Advances in X Ray Analysis written by Charles Barrett and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of solid-state detectors of high energy resolution to x-ray spectrometry, and the increasing use of compu ters in both measurement and data evaluation, are giving a new stimulus to x-ray techniques in analytical chemistry. The Twentieth Annual Denver X-ray Conference reflects this renewed interest in several ways. The invited papers, grouped in Session I, review the charac teristics of the detectors used in the measurement of x-rays. One paper is dedicated to the detection of single ions. Although such a subject may appear to be marginal to the purposes of the Denver Conference, we must recognize the affinity of techniques applied to similar purposes. Ion probe mass spectrometry is dedicated to tasks similar to those performed by x-ray spectrometry with the electron probe microanalyzer. Scientists and technologists will see these two techniques discussed in the same meetings. The discussion of automation and programming is not limited to the two invited speakers, but extends to papers presented in more than one session. The matter of fluorescence analysis by isotope- and tube-excitation will also be of great interest to those concerned with the practical applications of x-ray techniques. The communications contained in this volume, and the lively discussions which frequently followed the presentation of papers, attest to the vitality of the subjects which are the concern of the Annual Denver X-ray Conference.
Download or read book X ray Diffraction Procedures written by Harold P. Klug and published by . This book was released on 1959 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Issues in Materials and Manufacturing Research 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Additional Research. The editors have built Issues in Materials and Manufacturing Research: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Additional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Magnesium Technology 2018 written by Dmytro Orlov and published by Springer. This book was released on 2018-01-26 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defect Structure in Nanomaterials written by J Gubicza and published by Elsevier. This book was released on 2012-06-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials exhibit unique mechanical and physical properties compared to their coarse-grained counterparts, and are consequently a major focus of current scientific research. Defect structure in nanomaterials provides a detailed overview of the processing methods, defect structure and defect-related mechanical and physical properties of a wide range of nanomaterials. The book begins with a review of the production methods of nanomaterials, including severe plastic deformation, powder metallurgy and electrodeposition. The lattice defect structures formed during the synthesis of nanomaterials are characterised in detail. Special attention is paid to the lattice defects in low stacking fault energy nanomaterials and metal – carbon nanotube composites. Topics covered in the second part of the book include a discussion of the thermal stability of defect structure in nanomaterials and a study of the influence of lattice defects on mechanical and hydrogen storage properties. - Gives in-depth, physically based explanations for the relationships between the defect structure and mechanical properties of nanomaterials - Covers a wide range of nanomaterials including metals; alloys; ceramics; diamond; carbon nanotubes and their composites - Provides a detailed characterization of the lattice defect structure in nanomaterials
Download or read book Issues in Metal Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Metal Research / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metal Research. The editors have built Issues in Metal Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metal Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Metal Research / 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Nondestructive Evaluation of Materials written by Volker Weiss and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center of Water town, Massachusetts in cooperation with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has conducted the Sagamore Army Materials Research Conference since 1954. The main purpose of these conferences has been to gather together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. This volume NONDESTRUCTIVE EVALUATION OF MATERIALS, addresses the areas of x-ray, ultrasonics and other methods of nondestructive testing. We wish to acknowledge the dedicated assistance of Joseph M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book. Their help is deeply appreciated. Syracuse University Syracuse, New York The Editors Contents SESSION I X-RAY S. Heissman, Moderator H. K. Herglotz, Moderator 1. Overview of X-Ray Diffraction Methods for Nondestructive Testing • • • • • • • ••• 1 L. V. Azaroff 2. Detection of Fatigue Damage by X-Rays 21 S. Taira and K. Kamachi 3. A Historical Example of Fatigue Damage • • • • • • • 55 H. K. Herglotz 4. The Application of X-Ray Topography to Materials Science . . . . . . . . . . . . . . . . . . . . 69 S. Weissman 5.
Download or read book Two dimensional X ray Diffraction written by Bob B. He and published by John Wiley & Sons. This book was released on 2018-06-26 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable resource for researchers and students in materials science, chemistry, physics, and pharmaceuticals Written by one of the pioneers of 2D X-Ray Diffraction, this updated and expanded edition of the definitive text in the field provides comprehensive coverage of the fundamentals of that analytical method, as well as state-of-the art experimental methods and applications. Geometry convention, x-ray source and optics, two-dimensional detectors, diffraction data interpretation, and configurations for various applications, such as phase identification, texture, stress, microstructure analysis, crystallinity, thin film analysis, and combinatorial screening are all covered in detail. Numerous experimental examples in materials research, manufacture, and pharmaceuticals are provided throughout. Two-dimensional x-ray diffraction is the ideal, non-destructive analytical method for examining samples of all kinds including metals, polymers, ceramics, semiconductors, thin films, coatings, paints, biomaterials, composites, and more. Two-Dimensional X-Ray Diffraction, Second Edition is an up-to-date resource for understanding how the latest 2D detectors are integrated into diffractometers, how to get the best data using the 2D detector for diffraction, and how to interpret this data. All those desirous of setting up a 2D diffraction in their own laboratories will find the author’s coverage of the physical principles, projection geometry, and mathematical derivations extremely helpful. Features new contents in all chapters with most figures in full color to reveal more details in illustrations and diffraction patterns Covers the recent advances in detector technology and 2D data collection strategies that have led to dramatic increases in the use of two-dimensional detectors for x-ray diffraction Provides in-depth coverage of new innovations in x-ray sources, optics, system configurations, applications and data evaluation algorithms Contains new methods and experimental examples in stress, texture, crystal size, crystal orientation and thin film analysis Two-Dimensional X-Ray Diffraction, Second Edition is an important working resource for industrial and academic researchers and developers in materials science, chemistry, physics, pharmaceuticals, and all those who use x-ray diffraction as a characterization method. Users of all levels, instrument technicians and X-ray laboratory managers, as well as instrument developers, will want to have it on hand.
Download or read book TMS 2014 143rd Annual Meeting and Exhibition written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2014-01-13 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers present advancements in all aspects of high temperature electrochemistry, from the fundamental to the empirical and from the theoretical to the applied. Topics involving the application of electrochemistry to the nuclear fuel cycle, chemical sensors, energy storage, materials synthesis, refractory metals and their alloys, and alkali and alkaline earth metals are included. Also included are papers that discuss various technical, economic, and environmental issues associated with plant operations and industrial practices.
Download or read book Advanced X ray Techniques in Research and Industry written by Ashok Kumar Singh and published by IOS Press. This book was released on 2005 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the seminar held in Defence Metallurgical Research Laboratory, Hyderabad India in 2003.
Download or read book Research Anthology on Synthesis Characterization and Applications of Nanomaterials written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-03-19 with total page 1917 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanotechnologies continues to grow, as nanomaterials have proven their versatility and use in many different fields and industries within the scientific profession. Using nanotechnology, materials can be made lighter, more durable, more reactive, and more efficient leading nanoscale materials to enhance many everyday products and processes. With many different sizes, shapes, and internal structures, the applications are endless. These uses range from pharmaceutics to materials such as cement or cloth, electronics, environmental sustainability, and more. Therefore, there has been a recent surge of research focused on the synthesis and characterizations of these nanomaterials to better understand how they can be used, their applications, and the many different types. The Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials seeks to address not only how nanomaterials are created, used, or characterized, but also to apply this knowledge to the multidimensional industries, fields, and applications of nanomaterials and nanoscience. This includes topics such as both natural and manmade nanomaterials; the size, shape, reactivity, and other essential characteristics of nanomaterials; challenges and potential effects of using nanomaterials; and the advantages of nanomaterials with multidisciplinary uses. This book is ideally designed for researchers, engineers, practitioners, industrialists, educators, strategists, policymakers, scientists, and students working in fields that include materials engineering, engineering science, nanotechnology, biotechnology, microbiology, drug design and delivery, medicine, and more.
