Download or read book Worked Examples in Quantitative Metallography written by Rebecca L. Higginson and published by CRC Press. This book was released on 2003 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The aim of this book is to show examples of the application of these principles to calculate mean values and the confidence intervals for a number of important microstructural features. Knowledge of the accuracy of the experimental values of the microstructural parameters is essential for their valid interpretation and application. It is assumed that the reader is familiar with the application of statistical methods to data analysis, but the essentials are summarised in the Appendix."--BOOK JACKET.
Download or read book Practical Applications of Quantitative Metallography written by J. H. Steele and published by ASTM International. This book was released on 1984 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Stereology written by Ervin E. Underwood and published by Addison-Wesley. This book was released on 1970 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallographic and Materialographic Specimen Preparation Light Microscopy Image Analysis and Hardness Testing written by and published by ASTM International. This book was released on with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Quantitative Microscopy written by University of Florida and published by . This book was released on 1968 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interpretation of Metallographic Structures written by James Dvorak and published by Elsevier. This book was released on 2012-12-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation of Metallographic Structures, Second Edition describes the features of metallographic structures using an optical reflection microscope. This book is divided into six chapters and starts with an examination of the polycrystalline structures, subgrain boundaries, and an overview of cold and hot working, as well as recrystallization and grain growth. The next chapter explores the metallography of fracture, which involves visual inspection, low-power stereoptic light microscopy, polished-section light-reflection microscopy, and the scanning electron microscope. This topic is followed by discussions of the different types of crystallizations, the mechanism of solid-state transformation, and the diffusion and other transport processes. The last chapter involves the measurement aspects in metallography, including measurement of grain and particles sizes, as well as their distribution. This book is intended primarily to metallurgists and researchers.
Download or read book Metallurgical Microscopy written by Helfrid Modin and published by Elsevier. This book was released on 2016-01-22 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Microscopy provides the general principles, methods, and techniques in metallurgical microscopy. The book initially provides the techniques for specimen preparation for macroscopic and microscopic examination. Subsequent chapters are devoted to the discussion of light-optical microscopy and photography, interferometry and contrast-raising methods, and microhardness measurement. Topics on high-temperature microscopy, a brief review of the electron microprobe and its applications, and the construction, properties and applications of the electron microscope are presented as well. Metallurgists and materials scientists will find the book very informative and useful.
Download or read book Interpretation of Metallographic Structures written by William Rostoker and published by Elsevier. This book was released on 2012-12-02 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation of Metallographic Structures, Third Edition, is concerned with metallography as a metallurgical tool. It is an organized presentation of specimen microstructures, each chosen for its clarity of illustration and each or in groups forming the pretext for discussions of the interrelation between physical metallurgy and metallography. The focus is on structures characteristic in a physical metallurgy sense, with the purpose of demonstrating that logical framework of interpretation can supplant mental storage of infinite variations. The book contains seven chapters and begins with a discussion of polycrystalline structures. This is followed by separate chapters on the metallography of fracture; crystallization processes including dendritic crystallization, peritectic crystallization, and metastable crystallization; solid state transformations; diffusion and transport processes; procedures for measuring metallographic features; and energy dispersive spectography. This book is directed toward the senior student as a preview of the scope of his subject and to the practicing metallurgist as a reintroduction.
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Applied Metallography written by Georgee F. Vander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book should be of interest to practising engineers in metallurgy and materials science, mechanical engineers, chemical engineers involved with corrosion and inorganic chemistry, industry engineers in the steel and metal alloy business.
Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.
Download or read book Fifty Years of Progress in Metallographic Techniques written by American Society for Testing and Materials Annual Meeting and published by ASTM International. This book was released on 1968 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Modern Metallographic Techniques written by American Society for Metals and published by ASTM International. This book was released on 1970 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Metallurgist and Materials Technologist written by and published by . This book was released on 1984 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
