Download or read book Weldability of Stress Corrosion Resistant Stainless Steels Toughness Properties written by J. Honeycombe and published by . This book was released on 1977 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties of welded joints in three stress corrosion resistant stainless steels have been examined. Butt welds were prepared in plate of 10-13mm thickness using a range of welding processes and consumables.Tensile,
Download or read book Properties of Austenitic Stainless Steels and Their Weld Metals Influence of Slight Chemistry Variations written by C. R. Brinkman and published by ASTM International. This book was released on 1979 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Metallurgy of Stainless Steels written by Erich Folkhard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: When considering the operational performance of stainless steel weldments the most important points to consider are corrosion resistance, weld metal mechanical properties and the integrity ofthe weldedjoint. Mechanical and corrosion resistance properties are greatly influenced by the metallurgical processes that occur during welding or during heat treatment of welded components. This book is aimed, there fore, at providing information on the metallurgical problems that may be encountered during stainless steel welding. In this way we aim to help overcome a certain degree of insecurity that is often encountered in welding shops engaged in the welding of stainless steels and is often the cause of welding problems which may in some instances lead to the premature failure of the welded component. The metallurgical processes that occur during the welding of stainless steel are of a highly intricate nature. The present book focuses in particular on the signif icance of constitution diagrams, on the processes occurring during the solidification of weld metal and on the recrystallization and precipitation phenomena which take place in the area of the welds. There are specific chapters covering the hot cracking resistance during welding and the practical welding of a number of different stainless steel grades. In addition, recommendations are given as to the most suitable procedures to be followed in order to obtain maximum corrosion resistance and mechanical properties from the weldments.
Download or read book Toughness of Ferritic Stainless Steels written by R. A. Lula and published by ASTM International. This book was released on 1980 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Duplex Stainless Steels written by R Gunn and published by Woodhead Publishing. This book was released on 1997-10-21 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands them to bring the topics right up to date. There is new material to cover grades, specifications and standards, and the book is fully cross-references and indexed. The first reference book to be published on the increasingly popular duplex stainless steels, it will be widely welcomed by metallurgists, design and materials engineers, oil and gas engineers and anyone involved in materials development and properties. The first reference book on this relatively new engineering material Based on keynote papers from major international contributors Covers grades, standards and specifications
Download or read book Stainless Steel Information Manual for the Savannah River Plant Properties written by and published by . This book was released on 1964 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.
Download or read book Corrosion of Weldments written by Joseph R. Davis and published by ASM International. This book was released on 2006-01-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion failures of industrial components are commonly associated with welding. The reasons are many and varied. For example, welding may reduce the resistance to corrosion and environmentally assisted cracking by altering composition and microstructure, modifying mechanical properties, introducing residual stress, and creating physical defects. This book details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups--carbon and alloy steels, stainless steels, high-nickel alloys, and nonferrous alloys--describe both general welding characteristics and the metallurgical factors that influence corrosion behavior. Corrosion problems associated with dissimilar metal weldments are also examined. Case histories document corrosion problems unique to specific industries including oil and gas, chemical processing, pulp and paper, and electric power. Special challenges caused by high-temperature environments are discussed. Commonly used methods to monitor weld corrosion and test methods for evaluation of intergranular, pitting, crevice, stress-corrosion cracking, and other forms of corrosion are also reviewed.
Download or read book Austenitic Stainless Steels written by Wojciech Borek and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.
Download or read book Stainless Steels written by Joseph R. Davis and published by ASM International. This book was released on 1994-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASM Specialty Handbook® Stainless Steels The best single-volume reference on the metallurgy, selection, processing, performance, and evaluation of stainless steels, incorporating essential information culled from across the ASM Handbook series. Includes additional data and reference information carefully selected and adapted from other authoritative ASM sources.
Download or read book Advances in the Technology of Stainless Steels and Related Alloys written by and published by ASTM International. This book was released on 1983 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Stainless Steels written by Jonathan Beddoes and published by ASM International(OH). This book was released on 1999 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a basic and introductory reference, this book not only addresses stainless steels in the light of their resistance to corrosion for which they are more commonly recognised, but also explains the wide range of other useful properties attributable to the various and specific categories of these alloys. This book is a concise, easy-to-read introduction to one of the most widely used industrial materials. Each chapter explains an important concept related to the selection, application, processing and use of stainless steels. This book is indexed and includes appendices: (1) Identification of Stainless Steels in Service (2) Toxicity of Stainless Steel (3) Table of Equivalent Designations (this is not intended to be complete, but includes the more commonly used stainless steels and the most widely used designation systems). First published in 1965 and updated in 1986, this third edition is a completely new text.
Download or read book Stress corrosion Cracking of Stainless Steel written by Myra S. Feldman and published by . This book was released on 1962 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Thermal Aging on Stress Corrosion Cracking and Mechanical Properties of Stainless Steel Weld Metals written by Jeff Hixon and published by . This book was released on 2006 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress Corrosion Cracking (SCC) in and around primary loop piping welds in Boiling Water Reactors has been observed worldwide as plants continue to operate at temperatures and pressures near 2880C (5500F) and 6.9 MPa (1000 PSI). An experimental program was designed to explore the effect of thermal aging on the SCC crack growth rate in weld materials for type 316 and 304 stainless steels. An autoclave facility was designed and constructed for the measurement of SCC crack growth rates under BWR conditions and testing was underway at the time of this writing. The effects of composition and thermal aging on mechanical properties (i.e. tensile, micro-hardness, nano-hardness, Jic, and Charpy-impact toughness) was in process and initial results show an increase in yield strength and a decrease in fracture toughness after aging for 1000 hours at 430 and 400 *C. Thermal aging results in no discernable changes to the 6-ferrite morphology when viewed optically at 500 X agnifications and in the scanning electron microscope.
Download or read book Applied Welding Engineering written by Ramesh Singh and published by Elsevier. This book was released on 2011-11-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are several books on market that are designed to serve a company’s daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book’s four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author’s objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author’s own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca). Rules for developing efficient welding designs and fabrication procedures Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK) Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.
Download or read book A Century of Stainless Steels written by Vivekanand Kain and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the completion of one century of discovery of stainless steels, it is appropriate to take stock of the latest trends in wide ranging fields that relate to stainless steels. The book covers advances in all the major aspects related to stainless steels namely melting & refining, fabrication & forming, welding & joining, physical metallurgy, corrosion and its control and experience from use of stainless steels in various industries including newer varieties of stainless steels. The book will be a good source of information regarding various aspects of stainless steels. Volume is indexed by Thomson Reuters CPCI-S (WoS).
