Download or read book Pipelines for Water Conveyance and Drainage written by Roger W. Beieler and published by Amer Society of Civil Engineers. This book was released on 2013-01-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Pipelines for Water Conveyance and Drainage of the Irrigation Delivery and Drainage Systems Committee of the Irrigation and Drainage Council of the Environmental and Water Resources Institute of the American Society of Civil Engineers. Pipelines for Water Conveyance and Drainage offers a concise listing and description of 11 types of pipe commonly used for water conveyance and drainage. For each type of pipe, 20 characteristics are described, including such physical attributes as material, available sizes, standard lengths, protective linings and coatings, joints, and fittings. Performance characteristics include allowable internal pressure, external load capabilities, hydraulic resistance factor, wave speed, allowable leakage rates, and water quality tolerances. Installation and maintenance criteria include specifications; tapping methods; repair methods; installation, backfill, and protective requirements; and useful life. Information about common standards, industry groups, and reference publications is also included. This Manual of Practice (MOP) pertains to the following types of pipe: concrete, welded steel, ductile iron, polyvinyl chloride (PVC), high-density polyethylene (HDPE) pressure, polyethylene profile wall, PVC and polypropylene profile wall, corrugated polyethylene, fiberglass, corrugated metal, and vitrified clay pipe and clay drain tile. Design engineers, utility managers, planners, and educators will find MOP 125 to be an essential reference for designing, installing, and maintaining pipelines that convey water and drainage.

Download or read book Conveyance of Residuals from Water and Wastewater Treatment written by and published by Amer Society of Civil Engineers. This book was released on 2000-01-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Conveyance Systems written by United States. Bureau of Reclamation and published by . This book was released on 1989 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Klamath Project written by Eric A. Stene and published by . This book was released on 1994 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Distribution System Operation and Maintenance written by Kenneth D. Kerri and published by . This book was released on 2000-02 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rural Water Conveyance Systems and the Federal Land Policy and Management Act of 1976 written by United States. Congress. House. Committee on Interior and Insular Affairs. Subcommittee on Public Lands and published by . This book was released on 1987 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water and Wastewater Conveyance written by Frank R. Spellman and published by CRC Press. This book was released on 2016-08-05 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water and Wastewater Conveyance: Pumping, Hydraulics, Piping, and Valves provides fundamental, basic information on the conveyance of water and wastewater. Written in straight-forward and easy-to-understand language for professionals and non-professionals alike, it provides the techniques to assist water and wastewater operators to better understand basic pump operations and applications, maintenance regimens, and troubleshooting procedures. Addressing a multitude of water quality issues, it provides an introduction to water hydraulics, piping systems, tubes, hoses, and ancillaries as well as valves, and the maintenance requirements of each. It also discusses common operational problems and their appropriate corrective actions. Definitions of key terms and self-examination questions are provided at the end of each chapter.

Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2006-12-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

Download or read book Tunnel Engineering Handbook written by Thomas R. Kuesel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.

Download or read book Practices of Irrigation On farm Water Management Volume 2 written by Hossain Ali and published by Springer Science & Business Media. This book was released on 2011-01-11 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive and compact presentation in this book is the perfect format for a resource/textbook for undergraduate students in the areas of Agricultural Engineering, Biological Systems Engineering, Bio-Science Engineering, Water Resource Engineering, and Civil & Environmental Engineering. This book will also serve as a reference manual for researchers and extension workers in such diverse fields as agricultural engineering, agronomy, ecology, hydrology, and meteorology.

Download or read book Design of Water Supply Pipe Networks written by Prabhata K. Swamee and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative resource consolidates comprehensive information on the analysis and design of water supply systems into one practical, hands-on reference. After an introduction and explanation of the basic principles of pipe flows, it covers topics ranging from cost considerations to optimal water distribution design to various types of systems to writing water distribution programs. With numerous examples and closed-form design equations, this is the definitive reference for civil and environmental engineers, water supply managers and planners, and postgraduate students.

Download or read book The Orland Project written by Robert Autobee and published by . This book was released on 1993 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Measurement Manual written by and published by . This book was released on 2001 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Conservation Reuse and Recycling written by Academy of Sciences of the Islamic Republic of Iran and published by National Academies Press. This book was released on 2005-03-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 2002, a group of specialists on water resources from the United States and Iran met in Tunis, Tunisia, for an interacademy workshop on water resources management, conservation, and recycling. This was the fourth interacademy workshop on a variety of topics held in 2002, the first year of such workshops. Tunis was selected as the location for the workshop because the Tunisian experience in addressing water conservation issues was of interest to the participants from both the United States and Iran. This report includes the agenda for the workshop, all of the papers that were presented, and the list of site visits.

Download or read book Gravity Flow Water Supply written by Santiago Arnalich and published by Arnalich. This book was released on 2010-10 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tackling a Gravity Flow Water Project for the first time? This book is intended to get you on your feet quickly. You'll learn how to select pipe sizes, work out the demand you need to meet, interpret topographic surveys and perform economic calculations to compare different alternatives. Besides producing a sound design, it will help you to get to grips with the materials, put in orders, supervise the building work, and most of what you will need in your quest for access to safe water.

Download or read book Stormwater Conveyance Modeling and Design written by S. Rocky Durrans and published by . This book was released on 2003 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains academic versions of StormCAD Stand-Alone, PondPack, CulvertMaster, and FlowMaster software

Download or read book Water Supply Systems written by Cedo Maksimovic and published by Springer. This book was released on 2011-11-06 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology now affects almost every aspect of Water Supply Management, Operation, Planning and Design; the speed of development means that assessing what is "new" is sometimes difficult. Old ideas can now be applied because of new technology; technology is now revealing problems that were unnoticed 10 years ago. Some emerging technologies promise much but are still underdeveloped for use in real world conditions, while we should always remember that "new" technology depends upon the state of development in respective countries, a point which is particularly relevant to the NATO Advanced Study Institute, for which this book has been produced. Thus our objective in producing the book has been to highlight, in a wide range of technical areas, where and how technology is being applied, what is "new" and what the limitations of these technologies are in the real world. We have also tried to provide an European and American perspective where possible to illustrate how problems are tackled in different cultural environments. It is probably true that "technology" is also somewhat dependent upon the political, economic and organisational climate in different countries and we have included a chapter covering these aspects.