Download or read book Gas Turbine Handbook written by Tony Giampaolo and published by CRC Press. This book was released on 2020-11-26 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newly revised, this new fifth edition includes a chapter on waste heat recovery and discusses this technology in detail including a the advantages and barriers to waste heat recovery, environmental restraints, thermodynamics of heat recovery, fluid properties, boiler, condensers, steam turbines, off design behavior and exhaust catalyst. This book shows how microturbine designs rely heavily on the centrifugal compressor and are, in many aspects, similar to the early flight engines and will illustrate how the approach of the microturbine designer is to minimize cost.
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book ASME Technical Papers written by and published by . This book was released on 1995 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper written by and published by . This book was released on 1995 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Methods in Rotor Dynamics written by Andrew D. Dimarogonas and published by Springer Science & Business Media. This book was released on 2013-02-19 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of rotating machinery operating at supercritical speeds was, in the 1920s, an event of revolutionary importance for the then new branch of dynamics known as rotor dynamics. In the 1960s, another revolution occurred: In less than a decade, imposed by operational and economic needs, an increase in the power of turbomachinery by one order of magnitude took place. Dynamic analysis of complex rotor forms became a necessity, while the importance of approximate methods for dynamic analysis was stressed. Finally, the emergence of fracture mechanics, as a new branch of applied mechanics, provided analytical tools to investigate crack influence on the dynamic behavior of rotors. The scope of this book is based on all these developments. No topics related to the well-known classical problems are included, rather the book deals exclusively with modern high-power turbomachinery.
Download or read book Blade Design and Analysis for Steam Turbines written by Murari P. Singh and published by McGraw Hill Professional. This book was released on 2011-03-22 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE LATEST STEAM TURBINE BLADE DESIGN AND ANALYTICAL TECHNIQUES Blade Design and Analysis for Steam Turbines provides a concise reference for practicing engineers involved in the design, specification, and evaluation of industrial steam turbines, particularly critical process compressor drivers. A unified view of blade design concepts and techniques is presented. The book covers advances in modal analysis, fatigue and creep analysis, and aerodynamic theories, along with an overview of commonly used materials and manufacturing processes. This authoritative guide will aid in the design of powerful, efficient, and reliable turbines. COVERAGE INCLUDES: Performance fundamentals and blade loading determination Turbine blade construction, materials, and manufacture System of stress and damage mechanisms Fundamentals of vibration Damping concepts applicable to turbine blades Bladed disk systems Reliability evaluation for blade design Blade life assessment aspects Estimation of risk
Download or read book Mechanika teoretyczna i stosowana written by and published by . This book was released on 1994 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes: Biuletyn informacyjny.
Download or read book Theory and Practice of Decision Making in Regulation Diagnostics and Reliability of Machines written by Paweł Lindstedt and published by CRC Press. This book was released on 2024-12-13 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Practice of Decision Making in Regulation, Diagnostics and Reliability of Machines provides a guide to decision-making in the areas of regulation, diagnostics and reliability of machines. Outlining the theoretical foundations that support decision-making processes and applying them to practical examples, the book provides insight and direction to enable informed decisions leading to optimum system operation. It is difficult to achieve suitable safety and cost-efficiency without decision-making processes in place. Tackling this head-on, this book discusses theoretical foundations of decision-making and how this can impact diagnostics and the reliability of machines. Discussing cybernetics, artificial intelligence, engine control, machine diagnostics and reliability, the book uses practical examples such as turbine blades of aircraft engines and vehicles such as cars and buses. This book will be of interest to students and industry professionals in the fields of mechanical, aerospace and automotive engineering, enabling readers to make informed decisions in their field of work.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2006 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbine Blade Life Estimation written by J. S. Rao and published by Alpha Science Int'l Ltd.. This book was released on 2000 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blade life estimation is a multifaceted technology, involving free and forced vibration forces, that lead to the determination of steady and dynamic stresses at different critical speeds during the startup and shutdown procedures, as well as in the operational speed range. Propagation and unstable fracture are described with practical examples to estimate blade life.
Download or read book 10th International Conference on Vibrations in Rotating Machinery written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-09-11 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines. - Presents latest methods of theoretical, experimental and computational rotordynamics - Covers current issues of concern in the further development of rotating machines
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture Behaviour of Additively Manufactured Mechanical Components written by Roberto Citarella and published by MDPI. This book was released on 2021-02-19 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of additive manufacturing (AM) processes applied to the fabrication of structural components creates the need for design methodologies supporting structural optimization approaches that take into account the specific characteristics of the process. While AM processes enable unprecedented geometrical design freedom, which can result in significant reductions of component weight, on the other hand they have implications in the fatigue and fracture strength due to residual stresses and microstructural features. This is linked to stress concentration effects and anisotropy that still warrant further research. This Special Issue of Applied Sciences brings together papers investigating the features of AM processes relevant to the mechanical behavior of AM structural components, particularly, but not exclusively, from the viewpoints of fatigue and fracture behavior. Although the focus of the issue is on AM problems related to fatigue and fracture, articles dealing with other manufacturing processes with related problems are also be included.
Download or read book Handbook of Case Histories in Failure Analysis Volume 2 written by Khlefa Alarbe Esaklul and published by ASM International. This book was released on 1992-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents more than 120 expert failure analysis case histories from industries including automotive, aerospace, utilities, oil and gas, petrochemical, biomedical, ground transportation, off-highway vehicles, and more. Volume 2 builds on the tremendous acceptance of Volume 1 by the failure analysis community. The two volumes can also be purchased as a set for a special discounted price. Learn how others have investigated and solved failures in various industries involving a wide range of failure modes, materials, and analysis techniques.
Download or read book Vibration of Continuous Systems written by Singiresu S. Rao and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.
Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.
