Download or read book Verification of the Enhanced Integrated Climatic Module Soil Subgrade Input Parameters in the MEPDG written by Alain El Howayek and published by . This book was released on 2016-11-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: At the beginning of 2009, INDOT adopted the Mechanistic-Empirical Pavement Design Guide (MEPDG) method to study the tong-term pavement performance. The implementation of this new design approach led to difficulties for the pavement to pass the INDOT performance criteria; in particular pavement roughness (IRI) when A-6 or A-7-6 soils were considered as subgrade. This study focuses on investigating the influence of the soil input parameters in the Enhanced Integrated Climatic Model (EICM) on the prediction of the soil resilient modulus (MR) in the MEPDG. A total of four sites located around the state of Indiana are used to propose/validate the observations and conclusions made in the research.The study shows that (1) for the climatic conditions existing in Indiana, the location of the water table does not affect the value that the MEPDG uses for the subgrade MR; (2) the gravimetric water content is the most influential parameter on the EICM since it is directly related to the optimum degree of saturation of the subgrade; and (3) For A-7-6 soils, the overall deformation of the pavement structure is controlled by the subgrade (~80% of total deformation).In order to properly model the pavement structure, the MR input into the MEPDG for the subgrade should represent the optimum condition. This value will then be reduced within the EICM to reflect actual site conditions; and the MR input into the MEPDG for the treated layer should be a constant (i.e. not affected by EICM) and with PI and P200 values that are representative of the soil after treatment, given that the fines content and plasticity of a chemically-treated soil tend to decrease with treatment.
Download or read book Mechanistic empirical Pavement Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Integrated Materials and Construction Practices for Concrete Pavement written by and published by . This book was released on 2006 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of integrated material and construction practices for concrete pavements.
Download or read book Water in Road Structures written by Andrew Dawson and published by Springer Science & Business Media. This book was released on 2008-10-21 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Only book world-wide addressing this topic. The principal output of the European co-operative Action on "Water Movements in Road Pavements & Embankments". Provides unique guidance on assessing water condition and its affects on road performance. Provides unique guidance on assessing and ameliorating contaminant movement in pavement groundwater. Written by leading experts in Europe.
Download or read book Eleventh International Conference on the Bearing Capacity of Roads Railways and Airfields written by Inge Hoff and published by . This book was released on 2022 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Road, Railway and Airfield Bearing Capacity - Volume 1 comprises the first part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
Download or read book Asphalt Pavements written by Y. Richard Kim and published by CRC Press. This book was released on 2014-11-06 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements contains the proceedings of the International Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June 2014), and discusses recent advances in theory and practice in asphalt materials and pavements. The contributions cover a wide range of topics:- Environmental protection and socio-economic impacts- Additives and mo
Download or read book Precast Concrete Pavement Technology written by Shiraz D. Tayabji and published by . This book was released on 2013 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's second Strategic Highway Research Program (SHRP 2) Report S2-R05-RR-1: Precast Concrete Pavement Technology reviews the available precast concrete pavement (PCP) systems; summarizes PCP applications; and offers suggested guidelines for the design, fabrication, installation, and selection of PCP systems. " -- Publisher's description.
Download or read book Transportation Research written by Tom V. Mathew and published by Springer Nature. This book was released on 2019-10-24 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 4th Conference of the Transportation Research Group of India. It provides a comprehensive analysis of themes spanning the field of transportation encompassing economics, financial management, social equity, green technologies, operations research, big data analysis, econometrics and structural mechanics. This volume will be of interest to researchers, educators, practitioners, managers, and policy-makers world-wide.
Download or read book Pavement Engineering written by Rajib B. Mallick and published by CRC Press. This book was released on 2017-10-16 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavement Engineering will cover the entire range of pavement construction, from soil preparation to structural design and life-cycle costing and analysis. It will link the concepts of mix and structural design, while also placing emphasis on pavement evaluation and rehabilitation techniques. State-of-the-art content will introduce the latest concepts and techniques, including ground-penetrating radar and seismic testing. This new edition will be fully updated, and add a new chapter on systems approaches to pavement engineering, with an emphasis on sustainability, as well as all new downloadable models and simulations.
Download or read book The Aggregates Handbook Second Edition written by National Stone, Sand & Gravel Association and published by . This book was released on 2013-03-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Improvement and Ground Modification Methods written by Peter G. Nicholson and published by Butterworth-Heinemann. This book was released on 2014-08-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with more than 25 years of field and academic experience, Soil Improvement and Ground Modification Methods explains ground improvement technologies for converting marginal soil into soil that will support all types of structures. Soil improvement is the alteration of any property of a soil to improve its engineering performance. Some sort of soil improvement must happen on every construction site. This combined with rapid urbanization and the industrial growth presents a huge dilemma to providing a solid structure at a competitive price. The perfect guide for new or practicing engineers, this reference covers projects involving soil stabilization and soil admixtures, including utilization of industrial waste and by-products, commercially available soil admixtures, conventional soil improvement techniques, and state-of-the-art testing methods. Conventional soil improvement techniques and state-of-the-art testing methods Methods for mitigating or removing the risk of liquefaction in the event of major vibrations Structural elements for stabilization of new or existing construction industrial waste/by-products, commercially available soil Innovative techniques for drainage, filtration, dewatering, stabilization of waste, and contaminant control and removal
Download or read book Geo frontiers 2011 written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide for the Local Calibration of the Mechanistic empirical Pavement Design Guide written by and published by AASHTO. This book was released on 2010 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide provides guidance to calibrate the Mechanistic-Empirical Pavement Design Guide (MEPDG) software to local conditions, policies, and materials. It provides the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures, based on mechanistic-empirical (M-E) principles. The design procedure calculates pavement responses (stresses, strains, and deflections) and uses those responses to compute incremental damage over time. The procedure empirically relates the cumulative damage to observed pavement distresses.
Download or read book Concrete Pavement Design Construction and Performance written by Norbert Delatte and published by CRC Press. This book was released on 2007-09-12 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the interactions between the different design and construction variables and techniques this book illustrates best practices for constructing economical, long life concrete pavements. The book proceeds in much the same way as a pavement construction project. First, different alternatives for concrete pavement solutions are outlined. The desired performance and behaviour parameters are identified. Next, appropriate materials are outlined and the most suitable concrete proportions determined. The design can be completed, and then the necessary construction steps for translating the design into a durable facility are carried out. Although the focus reflects highways as the most common application, special features of airport, industrial, and light duty pavements are also addressed. Use is made of modeling and performance tools such as HIPERPAV and LTPP to illustrate behavior and performance, along with some case studies. As concrete pavements are more complex than they seem, and the costs of mistakes or of over-design can be high, this is a valuable book for engineers in both the public and private sectors.
Download or read book Modeling and Design of Flexible Pavements and Materials written by Dallas N. Little and published by Springer. This book was released on 2017-09-25 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook lays out the state of the art for modeling of asphalt concrete as the major structural component of flexible pavements. The text adopts a pedagogy in which a scientific approach, based on materials science and continuum mechanics, predicts the performance of any configuration of flexible roadways subjected to cyclic loadings. The authors incorporate state-of the-art computational mechanics to predict the evolution of material properties, stresses and strains, and roadway deterioration. Designed specifically for both students and practitioners, the book presents fundamentally complex concepts in a clear and concise way that aids the roadway design community to assimilate the tools for designing sustainable roadways using both traditional and innovative technologies.
Download or read book Effects of Heavy vehicle Characteristics on Pavement Response and Performance written by Thomas D. Gillespie and published by Transportation Research Board. This book was released on 1993 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
