Download or read book Seismic Design Methodologies for the Next Generation of Codes written by P. Fajfar and published by Routledge. This book was released on 2019-09-10 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings, arising from an international workshop, present research results and ideas on issues of importance to seismic risk reduction and the development of future seismic codes.
Download or read book Testing of Metals for Structures written by Federico Mazzolani and published by CRC Press. This book was released on 1991-09-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a pressing need for rationalization and standardization of test procedures for metals for use in all types of structure. This book brings together the latest international research developments, presented at a RILEM workshop held in Naples in May 1990.
Download or read book Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings written by P. Fajfar and published by CRC Press. This book was released on 1992-03-20 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty scientists working in 13 different countries detail in this work the most recent advances in seismic design and performance assessment of reinforced concrete buildings. It is a valuable contribution in the mitigation of natural disasters.
Download or read book Design of Reinforced Concrete Buildings for Seismic Performance written by Mark Aschheim and published by CRC Press. This book was released on 2019-04-05 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The costs of inadequate earthquake engineering are huge, especially for reinforced concrete buildings. This book presents the principles of earthquake-resistant structural engineering, and uses the latest tools and techniques to give practical design guidance to address single or multiple seismic performance levels. It presents an elegant, simple and theoretically coherent design framework. Required strength is determined on the basis of an estimated yield displacement and desired limits of system ductility and drift demands. A simple deterministic approach is presented along with its elaboration into a probabilistic treatment that allows for design to limit annual probabilities of failure. The design method allows the seismic force resisting system to be designed on the basis of elastic analysis results, while nonlinear analysis is used for performance verification. Detailing requirements of ACI 318 and Eurocode 8 are presented. Students will benefit from the coverage of seismology, structural dynamics, reinforced concrete, and capacity design approaches, which allows the book to be used as a foundation text in earthquake engineering.
Download or read book Earthquake Engineering written by Yousef Bozorgnia and published by CRC Press. This book was released on 2004-05-11 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-contributor book provides comprehensive coverage of earthquake engineering problems, an overview of traditional methods, and the scientific background on recent developments. It discusses computer methods on structural analysis and provides access to the recent design methodologies and serves as a reference for both professionals and res
Download or read book Proceedings written by and published by . This book was released on 1995 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Earthquake Engineering written by Junbo Jia and published by Springer. This book was released on 2016-10-01 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses applications of earthquake engineering for both offshore and land-based structures. It is self-contained as a reference work and covers a wide range of topics, including topics related to engineering seismology, geotechnical earthquake engineering, structural engineering, as well as special contents dedicated to design philosophy, determination of ground motions, shock waves, tsunamis, earthquake damage, seismic response of offshore and arctic structures, spatial varied ground motions, simplified and advanced seismic analysis methods, sudden subsidence of offshore platforms, tank liquid impacts during earthquakes, seismic resistance of non-structural elements, and various types of mitigation measures, etc. The target readership includes professionals in offshore and civil engineering, officials and regulators, as well as researchers and students in this field.
Download or read book Preliminary Report on the Principal Geotechnical Aspects of the January 17 1994 Northridge Earthquake written by and published by . This book was released on 1994 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by CRC Press. This book was released on 2009-12-03 with total page 1667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behaviour of Steel Structures in Seismic Areas comprises the latest progress in both theoretical and experimental research on the behaviour of steel structures in seismic areas. The book presents the most recent trends in the field of steel structures in seismic areas, with particular reference to the utilisation of multi-level performance bas
Download or read book Earthquake Engineer 10th World written by and published by Taylor & Francis US. This book was released on 1992-01-01 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Design and Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Resistant Design and Risk Reduction, 2nd edition is based upon global research and development work over the last 50 years or more, and follows the author’s series of three books Earthquake Resistant Design, 1st and 2nd editions (1977 and 1987), and Earthquake Risk Reduction (2003). Many advances have been made since the 2003 edition of Earthquake Risk Reduction, and there is every sign that this rate of progress will continue apace in the years to come. Compiled from the author’s wide design and research experience in earthquake engineering and engineering seismology, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake resistant design and risk reduction. New topics include the creation of low-damage structures and the spatial distribution of ground shaking near large fault ruptures. Sections on guidance for developing countries, response of buildings to differential settlement in liquefaction, performance-based and displacement-based design and the architectural aspects of earthquake resistant design are heavily revised. This book: Outlines individual national weaknesses that contribute to earthquake risk to people and property Calculates the seismic response of soils and structures, using the structural continuum “Subsoil – Substructure – Superstructure – Non–structure” Evaluates the effectiveness of given design and construction procedures for reducing casualties and financial losses Provides guidance on the key issue of choice of structural form Presents earthquake resistant design methods for the main four structural materials – steel, concrete, reinforced masonry and timber – as well as for services equipment, plant and non-structural architectural components Contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment This book is an invaluable reference and guiding tool to practising civil and structural engineers and architects, researchers and postgraduate students in earthquake engineering and engineering seismology, local governments and risk management officials.
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book Earthquake Engineering written by Alberto Bernal and published by CRC Press. This book was released on 1992-01-01 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The official proceedings of the 10th world conference on earthquake engineering in Madrid. Coverage includes damage in recent earthquakes, seismic risk and hazard, site effects, structural analysis and design, seismic codes and standards, urban planning, and expert system application.
Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.
Download or read book Handbook of Structural Engineering written by W.F. Chen and published by CRC Press. This book was released on 1997-10-24 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the broad spectrum of modern structural engineering topics, the Handbook of Structural Engineering is a complete, single-volume reference. It includes the theoretical, practical, and computing aspects of the field, providing practicing engineers, consultants, students, and other interested individuals with a reliable, easy-to-use source of information. Divided into three sections, the handbook covers:
Download or read book Passive and Active Structural Vibration Control in Civil Engineering written by T.T. Soong and published by Springer. This book was released on 2014-05-04 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base isolation, passive energy dissipation and active control represent three innovative technologies for protection of structures under environmental loads. Increasingly, they are being applied to the design of new structures or to the retrofit of existing structures against wind, earthquakes and other external loads. This book, with contributions from leading researchers from Japan, Europe, and the United States, presents a balanced view of current research and world-wide development in this exciting and fast expanding field. Basic principles as well as practical design and implementational issues associated with the application of base isolation systems and passive and active control devices to civil engineering structures are carefully addressed. Examples of structural applications are presented and extensively discussed.
Download or read book Energy Based Seismic Engineering written by Amadeo Benavent-Climent and published by Springer Nature. This book was released on 2021-04-30 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of seismic engineering, as presented by leading researchers and engineers at the 1st International Workshop on Energy-Based Seismic Engineering (IWEBSE), held in Madrid, Spain, on May 24-26, 2021. The contributions cover a diverse range of topics, including energy-based EDPs, damage potential of ground motion, structural modeling in energy-based damage assessment of structures, energy dissipation demand on structural components, innovative structures with energy dissipation systems or seismic isolation, as well as seismic design and analysis. Selected by means of a rigorous peer-review process, they will spur novel research directions and foster future multidisciplinary collaborations.
