Download or read book Materials and Contact Characterisation IX written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including papers from the 9th edition of the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the work of selected researchers on the subject. Material and contact characterisation is a rapidly advancing field and this volume contains the latest research. Of particular interest to industry and society is the knowledge of surface treatment and contact mechanics of these materials to determine the in-service behaviour of components subject to contact conditions. Modern society requires systems that operate at conditions that use resources effectively. In terms of components durability, the understanding of surface engineering wear frictional and lubrication dynamics has never been so important. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in the book cover a number of topics, including: Computer methods and simulation; Experimental and measurement techniques; Mechanical characterisation and testing; Materials under extreme conditions; Polymers and plastics; Advances in composites; Micro and macro characterisation; Corrosion and erosion; Damage, fatigue and fracture; Recycled materials; Materials and energy; Surface problems and contact mechanics; Surface modification and treatments; Thick and thin coatings; Tribomechanics and wear mechanics; Biomechanical characterisation; Biomechanical applications and Case studies.

Download or read book Engineering Geology for Society and Territory Volume 2 written by Giorgio Lollino and published by Springer. This book was released on 2014-09-16 with total page 2016 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, run out and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: Climate Change and Engineering Geology. Landslide Processes. River Basins, Reservoir Sedimentation and Water Resources. Marine and Coastal Processes. Urban Geology, Sustainable Planning and Landscape Exploitation. Applied Geology for Major Engineering Projects. Education, Professional Ethics and Public Recognition of Engineering Geology. Preservation of Cultural Heritage.

Download or read book Volcanic Rock Mechanics written by Claudio Olalla and published by CRC Press. This book was released on 2017-06-30 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volcanic Rock Mechanics includes papers and special lectures of the 3rd International Workshop on Volcanic Rocks, Rock Mechanics and Geo-Engineering in Volcanic Environments, which was held within the framework of the Congress Cities on Volcanoes6-Tenerife 2010 (Puerto de la Cruz, Tenerife, Spain, 31 May 4 June 2010). The book is a comprehensiv

Download or read book High Performance Eco Efficient Concrete written by Carlos Thomas and published by MDPI. This book was released on 2021-05-26 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to “High-Performance Eco-Efficient Concrete” and concrete fatigue behavior, more sustainable construction materials, capable of complying with quality standards and current innovation policies, aimed at saving natural resources and reducing global pollution. The development of self-compacting concretes with electric arc furnace slags is a further achievement. In addition, the technical and economic viability of using coarse recycled aggregates from crushed concrete in shotcrete, enhanced quality and reduced on-site construction time are the basic features of prefabricated bridge elements and systems, biomass bottom ash as aluminosilicate precursor and phosphogypsum were discussed. On the other hand, basalt fiber improving the mechanical properties and durability of reactive powder concrete, alkali-activated slag and high-volume fly ash and the potential of phosphogypsum as secondary raw material in construction industry, the effects of fly ash on the diffusion, bonding, and microproperties of chloride penetration in concrete were studied. Increasing amounts of sustainable concretes are being used as society becomes more aware of the environment. Finally, the circular economy as an economic model of production and consumption that involves reusing, repairing, refurbishing, and recycling materials after their service life are presented in this book.

Download or read book Proceedings of the 75th RILEM Annual Week 2021 written by J. Ivan Escalante-Garcia and published by Springer Nature. This book was released on 2023-03-10 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of sustainable construction materials and structures, as presented by leading international researchers and engineers at the 75th RILEM Annual Week (75RW 2021), held in Merida, Mexico on August 29 – September 3, 2021. It covers topics such as supplementary cementitious materials, durability and Life Cycle assessment in urban and marine conditions, additive manufacturing of concrete in construction, structural performance and design, non-Portland cements and Alkali activated cementitious materials and eco-concrete, cultural heritage, non-destructive testing techniques, bituminous materials, and construction materials (polymers, timber, bamboo, recycling and masonry). The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Fifth International PhD Symposium in Civil Engineering written by Joost Walraven and published by Taylor & Francis US. This book was released on 2004 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transforming Construction Advances in Fiber Reinforced Concrete written by Viktor Mechtcherine and published by Springer Nature. This book was released on with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultra High Performance Concrete and Nanotechnology in Construction Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials written by Insert Name Here and published by kassel university press GmbH. This book was released on 2012-01-01 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building for the Future Durable Sustainable Resilient written by Alper Ilki and published by Springer Nature. This book was released on 2023-05-31 with total page 1969 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the fib Symposium “Building for the future: Durable, Sustainable, Resilient”, held in Istanbul, Turkey, on 5–7 June 2023. The book covers topics such as concrete and innovative materials, structural performance and design, construction methods and management, and outstanding structures. fib (The International Federation for Structural Concrete) is a not-for-profit association whose mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic, and environmental performance of concrete construction.

Download or read book Concrete Solutions written by Michael Grantham and published by CRC Press. This book was released on 2016-09-19 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete Solutions contains the contributions from some 30 countries to Concrete Solutions, the 6th International Conference on Concrete Repair (Thessaloniki, Greece, 20-23 June 2016). Strengthening and retrofitting are major themes in this volume, with NDT and electrochemical repair following closely, discussing the latest advances and technologies in concrete repair. The book brings together some interesting and challenging theoretical approaches and questions if we really understand and approach such topics as corrosion monitoring correctly. Concrete Solutions is an essential reference work for those working in the concrete repair field, from engineers to architects and from students to clients. The Concrete Solutions Series of international conferences on concrete repair began in 2003 with a conference held in St. Malo, France in association with INSA Rennes. Subsequent conferences have seen the Series partnering with the University of Padua (Italy) in 2009, with TU Dresden (Germany) in 2011 and with Queen’s University Belfast (Northern Ireland) in 2014. In 2016 Thessaloniki (Greece) hosted the conference, partnering with both Aristotle University of Thessaloniki (AUTH) and Democritus University of Thrace (DUTH). The next conference in the series will be held in 2019 in Istanbul.

Download or read book Proceedings of Italian Concrete Conference 2022 written by Maria Antonietta Aiello and published by Springer Nature. This book was released on 2023-09-14 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best peer-reviewed papers presented at the Italian Concrete Conference, held in Naples, Italy, on October 12-15, 2022. The conference topics encompass the aspects of design, execution, rehabilitation, and control of concrete structures, with particular reference to theory and modeling, applications and realizations, materials and investigations, technology, and construction techniques. The contributions amply demonstrate that today’s structural concrete applications concern not only new constructions, but more and more rehabilitation, conservation, strengthening, and seismic upgrading of existing premises, and that requirements cover new aspects within the frame of sustainability, including environmental friendliness, durability, adaptability, and reuse of works and/or materials. As such, the book represents an invaluable, up-to-the-minute tool, providing an essential overview of structural concrete, as well as all new materials with cementitious matrices.

Download or read book The Structural Integrity of Recycled Aggregate Concrete Produced With Fillers and Pozzolans written by Paul O. Awoyera and published by Woodhead Publishing. This book was released on 2021-12-01 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structural Integrity of Recycled Aggregate Concrete Produced with Fillers and Pozzolans presents a review on the use of by-products, fillers and pozzolanic materials in the development of concrete, with an emphasis on structural integrity. The volume is broken down into key sections, including a review of the types of materials that are used as latent hydraulic supplements, fillers and pozzolans for making recycled aggregate concrete, rheology and hydration phenomenon, the mechanical and microscale nature of concrete, and the impact of fillers and pozzolans on the workability of concrete with case studies. Durability and strength development are also discussed. The final section looks at issues such as performance effect, LCA, environmental impact, sustainability and cost benefit analysis. With detailed case studies throughout, this volume will provide useful information for all stakeholders involved in the built environment, including materials scientists, civil engineers, builders, architects and policymakers. Identifies several potential by-products, fillers and pozzolans for the development of durable concrete Acts as a guidebook for constructors and researchers working in the broad field of material science, engineering and in-situ application Presents the durability properties of concrete made of by-products, fillers and pozzolans

Download or read book Low Binder Concrete and Mortars written by Jorge de Brito and published by MDPI. This book was released on 2020-12-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a Special Issue published in Applied Sciences entitled “Low Binder Concrete and Mortars". The main aim of this work is to highlight practical approaches that facilitate the production of low binder content concrete and mortar with an acceptable level of technical performance (e.g., mechanical and durability) and environmental impacts (e.g., ecotoxicological and global warming). Its contents are organized in the following sections: Developing Zero-Cement Binder; Ecotoxicological and Chemical Characteristics of the Non-conventional Materials Used to Replace Cement and Natural Aggregates; Reduce the Environmental Impacts and Resources Use of Binders; Modify the Characteristics of the Cement-Based Materials; Low Binder Concrete On-Site Application; Sustainable Cement-Based Materials in Road Engineering.

Download or read book Nanotechnology in Construction written by Zdenek Bittnar and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd International Symposium on Nanotechnology in Construction (NICOM 3) follows the highly successful NICOM 1 (Paisley, UK 2003) and NICOM 2 (Bilbao, Spain 2005) Symposia. The NICOM3 symposium was held in Prague, Czech Republic from May 31 to June 2, 2009 under the auspices of the Czech Technical University in Prague. It was a cross-disciplinary event, bringing together R&D experts and users from different fields all with interest in nanotechnology and construction. The conference was aimed at: Understanding of internal structures of existing construction materials at nano-scale Modification at nano-scale of existing construction materials. Production and properties of nanoparticulate materials, nanotubes and novel polymers. Modeling and simulation of nanostructures. Instrumentation, techniques and metrology at nano-scale. Health and safety issues and environmental impacts related to nanotechnology during research, manufacture and product use. Review of current legislation. Societal and commercial impacts of nanotechnology in construction, their predictions and analysis.

Download or read book Renewable Energy in Circular Economy written by Suhaib A. Bandh and published by Springer Nature. This book was released on 2023-10-09 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive overview of the technologies and processes involved in renewable energy generation, with a specific focus on their role in improving the circular economy. It offers all the necessary information and tools to help readers select the most sustainable renewable energy solution for different conditions. Exploring real-life examples, the book delves into the practical applications of the circular economy in the renewable energy sector. It takes a multi-faceted approach, examining the circular economy from various perspectives and incorporating methods such as lifecycle assessment, sustainability assessment, multi-criteria decision-making, and multi-objective optimization modes. Furthermore, the book explores the concept of blockchain, hybrid renewable energy models, technologies, and implementation. It also investigates the critical factors and key enablers that influence sustainable development in this field. By doing so, it not only facilitates the transition to a circular economy but also highlights the shift in recent research, trends, and attitudes towards a more scientifically grounded approach. The primary objective of this book is to compile research specifically focused on the circular economy in renewable energy. By providing researchers and policymakers in the energy sector with the necessary scientific methodology and metrics, it enables the development of strategies for a sustainable transition. This book serves as a valuable resource for students, researchers, and practitioners seeking to deepen their understanding of energy planning and the current and future trends of biofuel as an alternative fuel.

Download or read book Waste and Byproducts in Cement Based Materials written by Jorge de Brito and published by Woodhead Publishing. This book was released on 2021-06-03 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more. Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM. Favors the institution of the circular economy in the construction industry by eliminating the barriers that currently prevent industrial waste from being valorized by its inclusion in CBM design Features an in-depth exploration of the strengths and weaknesses of new raw materials and their application to CBMs Features real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others Presents current, state-of-the-art, and future-prospects for the use of industrial waste in CBMs

Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.