Download or read book The Physics of Particle Accelerators written by Klaus Wille (prof.) and published by Clarendon Press. This book was released on 2000 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from a historical overview of particle accelerator development and an emphasis on the importance of high energy particles in fundamental research, Wille (physics, U. of Dortmund) surveys many aspects of accelerator physics also relevant to other disciplines and develops relevant formulas step-by-step. Suitable for a senior undergraduate text. The translator is in the physics department at the U. of Bristol. First published in Germany in 1996. c. Book News Inc.

Download or read book Particle Accelerator Physics I written by Helmut Wiedemann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second edition of Particle Accelerator Physics, Vol. 1, is mainly a reprint of the first edition without significant changes in content. The bibliography has been updated to include more recent progress in the field of particle accelerators. With the help of many observant readers a number of misprints and errors could be eliminated. The author would like to express his sincere appreciation to all those who have pointed out such shortcomings and wel comes such information and any other relevant information in the future. The author would also like to express his special thanks to the editor Dr. Helmut Lotsch and his staff for editorial as well as technical advice and support which contributed greatly to the broad acceptance of this text and made a second edition of both volumes necessary. Palo Alto, California Helmut Wiedemann November 1998 VII Preface to the First Edition The purpose of this textbook is to provide a comprehensive introduction into the physics of particle accelerators and particle beam dynamics. Parti cle accelerators have become important research tools in high energy physics as well as sources of incoherent and coherent radiation from the far infra red to hard x-rays for basic and applied research. During years of teaching accelerator physics it became clear that the single most annoying obstacle to get introduced into the field is the absence of a suitable textbook.

Download or read book A Practical Introduction to Beam Physics and Particle Accelerators written by Santiago Bernal and published by Morgan & Claypool Publishers. This book was released on 2018-10-26 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a brief exposition of the principles of beam physics and particle accelerators with an emphasis on numerical examples employing readily available computer tools. However, it avoids detailed derivations, instead inviting the reader to use general high-end languages such as Mathcad and Matlab, as well as specialized particle accelerator codes (e.g. MAD, WinAgile, Elegant, and others) to explore the principles presented. This approach allows readers to readily identify relevant design parameters and their scaling. In addition, the computer input files can serve as templates that can be easily adapted to other related situations. The examples and computer exercises comprise basic lenses and deflectors, fringe fields, lattice and beam functions, synchrotron radiation, beam envelope matching, betatron resonances, and transverse and longitudinal emittance and space charge. The last chapter presents examples of two major types of particle accelerators: radio frequency linear accelerators (RF linacs) and storage rings. Lastly, the appendix gives readers a brief description of the computer tools employed and concise instructions for their installation and use in the most popular computer platforms (Windows, Macintosh and Ubuntu Linux). Hyperlinks to websites containing all relevant files are also included. An essential component of the book is its website (actually part of the author's website at the University of Maryland), which contains the files that reproduce results given in the text as well as additional material such as technical notes and movies.

Download or read book An Introduction to the Physics of Particle Accelerators written by Mario Conte and published by World Scientific. This book was released on 2008 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a concise and coherent introduction to the physics of particle accelerators, with attention being paid to the design of an accelerator for use as an experimental tool. In the second edition, new chapters on spin dynamics of polarized beams as well as instrumentation and measurements are included, with a discussion of frequency spectra and Schottky signals. The additional material also covers quadratic Lie groups and integration highlighting new techniques using Cayley transforms, detailed estimation of collider luminosities, and new problems."--BOOK JACKET.

Download or read book Particle Accelerators Colliders and the Story of High Energy Physics written by Raghavan Jayakumar and published by Springer Science & Business Media. This book was released on 2011-10-27 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes the readers through the science behind particle accelerators, colliders and detectors: the physics principles that each stage of the development of particle accelerators helped to reveal, and the particles they helped to discover. The book culminates with a description of the Large Hadron Collider, one of the world’s largest and most complex machines operating in a 27-km circumference tunnel near Geneva. The book provides the material honestly without misrepresenting the science for the sake of excitement or glossing over difficult notions. The principles behind each type of accelerator is made accessible to the undergraduate student and even to a lay reader with cartoons, illustrations and metaphors. Simultaneously, the book also caters to different levels of reader’s background and provides additional materials for the more interested or diligent reader.

Download or read book An Introduction to the Physics of High Energy Accelerators written by D. A. Edwards and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first half deals with the motion of a single particle under the influence of electronic and magnetic fields. The basic language of linear and circular accelerators is developed. The principle of phase stability is introduced along with phase oscillations in linear accelerators and synchrotrons. Presents a treatment of betatron oscillations followed by an excursion into nonlinear dynamics and its application to accelerators. The second half discusses intensity dependent effects, particularly space charge and coherent instabilities. Includes tables of parameters for a selection of accelerators which are used in the numerous problems provided at the end of each chapter.

Download or read book An Introduction to Particle Accelerators written by Edward J. N. Wilson and published by Clarendon Press. This book was released on 2001 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the linear accelerators used for cancer therapy in hospitals, to the giant atom smashers at international laboratories, this book provides a simple introduction to particle accelerators.

Download or read book University Physics written by OpenStax and published by . This book was released on 2016-11-04 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is a three-volume collection that meets the scope and sequence requirements for two- and three-semester calculus-based physics courses. Volume 1 covers mechanics, sound, oscillations, and waves. Volume 2 covers thermodynamics, electricity and magnetism, and Volume 3 covers optics and modern physics. This textbook emphasizes connections between between theory and application, making physics concepts interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. Frequent, strong examples focus on how to approach a problem, how to work with the equations, and how to check and generalize the result. The text and images in this textbook are grayscale.

Download or read book Principles of Charged Particle Acceleration written by Stanley Humphries and published by Courier Corporation. This book was released on 2013-09-11 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative text offers a unified, programmed summary of the principles underlying all charged particle accelerators — it also doubles as a reference collection of equations and material essential to accelerator development and beam applications. The only text that covers linear induction accelerators, the work contains straightforward expositions of basic principles rather than detailed theories of specialized areas. 1986 edition.

Download or read book Accelerator Physics Fourth Edition written by Shyh-yuan Lee and published by World Scientific Publishing. This book was released on 2018-11-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development of high energy accelerators began in 1911. Since then, progresses achieved are:The impacts of the accelerator development are evidenced by the many ground-breaking discoveries in particle and nuclear physics, atomic and molecular physics, condensed matter physics, biology, biomedical physics, nuclear medicine, medical therapy, and industrial processing. This book is intended to be used as a graduate or senior undergraduate textbook in accelerator physics and science. It can be used as preparatory course material in graduate accelerator physics thesis research. The text covers historical accelerator development, transverse betatron motion, synchrotron motion, an introduction to linear accelerators, and synchrotron radiation phenomena in low emittance electron storage rings, introduction to special topics such as the free electron laser and the beam-beam interaction. Hamiltonian dynamics is used to understand beam manipulation, instability and nonlinearity. Each section is followed by exercises, which are designed to reinforce the concept discussed and to solve a realistic accelerator design problem.

Download or read book Particle Accelerators From Big Bang Physics to Hadron Therapy written by Ugo Amaldi and published by Springer. This book was released on 2015-01-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rather than focusing on the contributions of theoretical physicists to the understanding of the subatomic world and of the beginning of the universe - as most popular science books on particle physics do - this book is different in that, firstly, the main focus is on machine inventors and builders and, secondly, particle accelerators are not only described as discovery tools but also for their contributions to tumour diagnosis and therapy. The characters of well-known (e.g. Ernest Lawrence) and mostly unknown actors (e.g. Nicholas Christofilos) are outlined, including many colourful quotations. The overall picture supports the author’s motto: “Physics is beautiful and useful”. Advance appraisal: “Accelerators go all the way from the unique and gargantuan Large Hadron Collider to thousands of smaller versions in hospitals and industry. Ugo Amaldi has experience across the range. He has worked at CERN and has for many years been driving the application of accelerators in medicine. This is a must-read introduction to this frontier of modern technology, written beautifully by a world expert.” Frank Close, Professor of Physics at Oxford University author of "The Infinity Puzzle" “This book should be read by school teachers and all those interested in the exploration of the microcosm and its relation to cosmology, and in the use of accelerators for medical applications. With a light hand and without formulae the autho r easily explains complicated matters, spicing up the text with amusing historical anecdotes. His reputation as an outstanding scientist in all the fields treated guarantees high standards.” Herwig Schopper, former CERN Director General author of "LEP - The Lord of the Collider Rings at CERN" “This book tells the story of modern physics with an unusual emphasis on the machine-builders who made it all possible, and their machines. Learning to accelerate particles has enabled physicists to probe the subatomic world and gain a deeper understanding of the cosmos. It has also brought numerous benefits to medicine, from the primitive X-ray machines of over a century ago to today's developments in hadron therapy for cancer. Amaldi tells this story in a most fascinating way.” Edward Witten, Professor of Mathematical Physics at the Institute for Advanced Study in Princeton; Fields Medal (1990)

Download or read book Understanding the Physics of Particle Accelerators written by François Méot and published by Springer Nature. This book was released on with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Accelerator Physics and Engineering written by Alex Chao and published by World Scientific. This book was released on 1999 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this handbook focuses on Linacs, Synchrotrons and Storage Rings and is intended as a vade mecum for professional engineers and physicists engaged in these subjects. Here one will find, in addition to the common formulae of previous compilations, hard to find specialized formulae, recipes and material data pooled from the lifetime experiences of many of the world's most able practitioners of the art and science of accelerator building and operation.

Download or read book Accelerator Health Physics written by H. Wade Patterson and published by Elsevier. This book was released on 2012-12-02 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerator Health Physics tackles the importance of health physics in the field of nuclear physics, especially to those involved with the use of particle accelerators. The book first explores concepts in nuclear physics, such as fundamental particles, radiation fields, and the responses of the human body to radiation exposure. The book then shifts to its intended purpose and discusses the uses of particle accelerators and the radiation they emit; the measurement of the radiation fields - radiation detectors, the history, design, and application of accelerator shielding; and measures in the implementation of a health physics program. The text is recommended for health physicists who want to learn more about particle accelerators, their effects, and how these effects can be prevented. The book is also beneficial to physicists whose work involves particle accelerators, as the book aims to educate them about the hazards they face in the workplace.

Download or read book Safety for Particle Accelerators written by Thomas Otto and published by Springer Nature. This book was released on 2020-12-29 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of non-standard technologies such as superconductivity, cryogenics and radiofrequency pose challenges for the safe operation of accelerator facilities that cannot be addressed using only best practice from occupational safety in conventional industry. This book introduces readers to different occupational safety issues at accelerator facilities and is directed to managers, scientists, technical personnel and students working at current or future accelerator facilities. While the focus is on occupational safety – how to protect the people working at these facilities – the book also touches on “machine safety” – how to prevent accelerators from doing structural damage to themselves. This open access book offers a first introduction to safety at accelerator facilities. Presenting an overview of the safety-related aspects of the specific technologies employed in particle accelerators, it highlights the potential hazards at such facilities and current prevention and protection measures. It closes with a review of safety management and organization at accelerator facilities.

Download or read book Measurement and Control of Charged Particle Beams written by Michiko G. Minty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "This book is a very welcome and valuable addition to the accelerator literature. As noted by the authors, there is relatively little material in the book specifically for low-energy machines, but industrial users may still find it useful to read." Cern Courier

Download or read book Hands On Accelerator Physics Using MATLAB written by Volker Ziemann and published by CRC Press. This book was released on 2019-04-29 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Awarded one of BookAuthority's best new Particle Physics books in 2019! Hands-On Accelerator Physics Using MATLAB® provides an introduction into the design and operational issues of a wide range of particle accelerators, from ion-implanters to the Large Hadron Collider at CERN. Many aspects from the design of beam optical systems and magnets, to the subsystems for acceleration, beam diagnostics, and vacuum are covered. Beam dynamics topics ranging from the beam-beam interaction to free-electron lasers are discussed. Theoretical concepts and the design of key components are explained with the help of MATLAB® code. Practical topics, such as beam size measurements, magnet construction and measurements, and radio-frequency measurements are explored in student labs without requiring access to an accelerator. This unique approach provides a look at what goes on 'under the hood' inside modern accelerators and presents readers with the tools to perform their independent investigations on the computer or in student labs. This book will be of interest to graduate students, postgraduate researchers studying accelerator physics, as well as engineers entering the field. Features: Provides insights into both synchrotron light sources and colliders Discusses technical subsystems, including magnets, radio-frequency engineering, instrumentation and diagnostics, correction of imperfections, control, and cryogenics Accompanied by MATLAB® code, including a 3D-modeler to visualize the accelerators, and additional appendices which are available on the CRC Press website MATLAB live-scripts to accompany the book can be found here: https://ziemann.web.cern.ch/ziemann/mybooks/mlx/