Download or read book Ultrathin Metal Transparent Electrodes for the Optoelectronics Industry written by Dhriti Sundar Ghosh and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent electrodes (TEs) are a class of materials that make it possible to bring electrical current or potentials in close proximity to optically active regions without significant loss of optical energy. However, it is a challenge to decouple the electrical and optical properties of a material, as the property of conductivity is strongly coupled to the imaginary part of the refractive index. An ideal TE has high transparency in combination with very low electrical resistivity. The main objective of the thesis was to develop TEs which can replace expensive, scarce and fragile Indium Tin Oxide (ITO), the most widely used TE material in the industry today. The thesis contains original work on ultrathin metal film (UTMF)-based TEs, which are essential elements in a wide range of optoelectronics, consumer electronics and energy devices. It presents new designs and fabrication methods and demonstrates the efficient use of UTMF-TEs in organic light emitting diodes and solar cells, achieving similar levels of efficiency to that of state-of-the-art ITO.
Download or read book Silicon Nanomembranes written by John A. Rogers and published by John Wiley & Sons. This book was released on 2016-08-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by the leaders in the fi eld, with chapters from highly renowned international researchers, this is the fi rst coherent overview of the latest in silicon nanomembrane research. As such, it focuses on the fundamental and applied aspects of silicon nanomembranes, ranging from synthesis and manipulation to manufacturing, device integration and system level applications, including uses in bio-integrated electronics, three-dimensional integrated photonics, solar cells, and transient electronics. The first part describes in detail the fundamental physics and materials science involved, as well as synthetic approaches and assembly and manufacturing strategies, while the second covers the wide range of device applications and system level demonstrators already achieved, with examples taken from electronics and photonics and from biomedicine and energy.
Download or read book Smart Textiles written by Nazire Deniz Yilmaz and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Textiles: Wearable Nanotechnology provides a comprehensive presentation of recent advancements in the area of smart nanotextiles giving specific importance to materials and production processes. Different materials, production routes, performance characteristics, application areas and functionalization mechanisms are covered. The book provides a guideline to students, researchers, academicians and technologists who seek novel solutions in the related area by including groundbreaking advancements in different aspects of the diverse smart nanotextiles fields. This ground-breaking book is expected to spark an inspiration to allow future progress in smart nanotextiles research. The diversity of the topics, as well as the expert subject-matter contributors from all over the world representing various disciplines, ensure comprehensiveness and a broad understanding of smart nanotextiles.
Download or read book Graphene and other Two dimensional Materials in Nanoelectronics and Optoelectronics written by Jie Sun and published by MDPI. This book was released on 2020-12-02 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is probably the most fascinating material discovered in this century. A group of 2D materials can be called graphene derivatives, and these have attracted tremendous interest. This includes materials that are one or a few atoms thick. They have outstanding optical/electrical properties, and, most importantly, they are flat and thin—they can be processed with existing semiconductor technologies. Therefore, they have great potential in nanoelectronics and optoelectronics, playing a revolutionary role in these fields via their integration with other bulk materials. Of course, there are still challenges, such as large-scale production, as well as the mechanical transfer of these atomically thin sheets. These are the fields where scientists are now actively doing research. In this book, some leading scientists in the area share their most recent results on the material growth, device physics/processing, and system integration of 2D materials and devices. This book can serve as a starting point for young students to get familiar with the field, and should also be valuable to established device physicists and engineers who would like to explore the potential applications of 2D materials in electronics.
Download or read book Novel Embedded Metal mesh Transparent Electrodes written by Arshad Khan and published by Springer Nature. This book was released on 2020-01-28 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents fabrication approaches that could be adapted for the high-throughput and low-cost manufacturing of the proposed transparent electrode. It proposes and demonstrates a new type of embedded metal-mesh transparent electrode (EMTE) that offers superior electrical, optical, and mechanical properties. The structure of the EMTE allows thick metal mesh to be used (for high conductivity) without sacrificing surface smoothness. In addition, the embedded structure improves the EMTE’s mechanical stability under high bending stress, as well as its chemical stability in ambient environments. These design aspects are then shown to be suitable for larger electrode areas, narrower metal-mesh line widths, and a wide range of materials, and can easily be adapted to produce flexible and even stretchable devices. In closing, the book explores the practical applications of EMTEs in flexible bifacial dye-sensitized solar cells and transparent thin-film heaters, demonstrating their outstanding performance.
Download or read book Metamaterials and Metasurfaces written by Josep Canet-Ferrer and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metamaterials have provided applications in spectral ranges covering radio frequencies and ultraviolet. However, most applications have been extrapolated to the visible or near-infrared after being developed at the GHz level. This is due to technological reasons since fabrication of microwave antennas is not as demanding as THz resonators or plasmonic nanostructures. Accordingly, this book has been divided into three parts. In the first part, fundamentals of metamaterials and metadevices are discussed, while describing recent advances in the field. In the second part, the discussion is extended to the different spectral ranges focusing on the strategies for enabling the reconfigurability of metadevices. Given the increasing interest in THz applications, these can be found in the third part.
Download or read book Handbook of Optoelectronics written by John P. Dakin and published by CRC Press. This book was released on 2017-10-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Optoelectronics offers a self-contained reference from the basic science and light sources to devices and modern applications across the entire spectrum of disciplines utilizing optoelectronic technologies. This second edition gives a complete update of the original work with a focus on systems and applications. Volume I covers the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials with brand new chapters on silicon photonics, nanophotonics, and graphene optoelectronics. Volume II addresses the underlying system technologies enabling state-of-the-art communications, imaging, displays, sensing, data processing, energy conversion, and actuation. Volume III is brand new to this edition, focusing on applications in infrastructure, transport, security, surveillance, environmental monitoring, military, industrial, oil and gas, energy generation and distribution, medicine, and free space. No other resource in the field comes close to its breadth and depth, with contributions from leading industrial and academic institutions around the world. Whether used as a reference, research tool, or broad-based introduction to the field, the Handbook offers everything you need to get started. (The previous edition of this title was published as Handbook of Optoelectronics, 9780750306461.) John P. Dakin, PhD, is professor (emeritus) at the Optoelectronics Research Centre, University of Southampton, UK. Robert G. W. Brown, PhD, is chief executive officer of the American Institute of Physics and an adjunct full professor in the Beckman Laser Institute and Medical Clinic at the University of California, Irvine.
Download or read book Graphene Photonics written by Jia-Ming Liu and published by Cambridge University Press. This book was released on 2018-12-13 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is a single-layer crystal of carbon, the thinnest two-dimensional material. It has unique electronic and photonic properties.
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Download or read book Chemical Solution Synthesis for Materials Design and Thin Film Device Applications written by Soumen Das and published by Elsevier. This book was released on 2021-01-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing
Download or read book Metal and Metal Oxides for Energy and Electronics written by Saravanan Rajendran and published by Springer Nature. This book was released on 2020-10-05 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is a key world issue in the context of climate change and increasing population, 'calling for alternative fuels, better energy storage, and energy-saving devices. This books reviews the principles and applications of metals and metal oxides for energy, with focus on batteries, electrodes, nanomaterials, electronics, supercapacitors, biofuels and sensors.
Download or read book Nanocarbons for Advanced Energy Conversion written by Xinliang Feng and published by John Wiley & Sons. This book was released on 2015-08-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second volume in the first book series on nanocarbons for advanced applications the highly renowned series and volume editor has put together a top author team of internationally acclaimed experts on carbon materials. Divided into three major parts, this reference provides a current overview of the design, synthesis, and characterization of nanocarbons, such as carbon nanotubes, fullerenes, graphenes, and porous carbons for energy conversion applications. It covers such varied topics as electrocatalysts for oxygen reduction reactions in the different types of fuel cells, metal-air batteries and electrode materials for photovoltaic devices, as well as photocatalysts, electrocatalysts and photoelectrocatalysts for water splitting. Throughout, the authors highlight the unique aspects of nanocarbon materials in these fields, with a particular focus on the physico-chemical properties which lead to enhanced device performances.
Download or read book OLED Fundamentals written by Daniel J. Gaspar and published by CRC Press. This book was released on 2015-05-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Source for Taking on the Next Stage of OLED R&DOLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes brings together key topics across the field of organic light-emitting diodes (OLEDs), from fundamental chemistry and physics to practical materials science and engineering aspects to design and ma
Download or read book Graphene Materials Advanced Applications written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PV Technology and Manufacturing written by Abdul Hai Alami and published by Springer Nature. This book was released on 2023-06-12 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the manufacturing processes of photovoltaic solar cells, from conventional silicon cells, to thin-film technologies and ending with the cutting-edge technologies of third-generation photovoltaics. The rapid advances in photovoltaic technologies are propelled by the discovery of new materials through innovative routes of synthesis and deposition. For example, the exponential enhancement in efficiencies of perovskite solar cells between years 2015 and 2020 is a direct result of the availability of new materials to capitalize on innovative manufacturing techniques. Currently, efficiencies of up to 25.5% are achieved by perovskite solar cells technologies. This book is intended for scientists and engineers who are keen on having a solid understanding of conventional manufacturing processes of bulk silicon for photovoltaic purposes, as well as advanced processes used to synthesize materials for emerging photovoltaic technologies such as thin-film and third-generation PV. The book is designed to be self-contained to allow the reader to develop knowledge and experience in materials selection as well as a good understanding of pertinent manufacturing process to arrive at best device performance. The technologies presented are also analyzed for its energy and environmental impacts.
Download or read book Thin Film Metal Oxides written by Shriram Ramanathan and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
