Download or read book Ultrasonic Measurement of Lubricant Films Generated at the Piston cylinder Interface of Internal Combustion Engines written by Robin S. Mills and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultrasonic Measurement of Lubricant Films Generated at the Piston cylinder Interface of Internal Combustion Engines written by Robin Mills and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines are perhaps the most ubiquitous power source in the modern world. Their heavy use in the vehicle industry and the current impetus to improve efficiency whilst reducing emissions means that OEMs are driving research to provide cleaner and 'greener' engines. Though significant effort is being channelled into teasing out improvements in thermodynamic Efficiency by such methods as pressure boosting and power management. the nature of an engine means many moving parts contribute to parasitic frictional loss. Of these interfaces. the reciprocating contacts between cylinder. piston rings and skirt are arguably subject to the most demanding tribological conditions within an engine. required to seal against the high temperature' combustion gases whilst supporting the large side loading inherent to the system. Given that the piston of an engine may perform this action hundreds of millions of times in its lifespan. the lubrication strategy and component design is of key importance in minimising wear frictional losses. Though the use of numerical simulation tools for improving design has seen significant growth as computational capabilities improve and provide cost advantages to full scale testing. robust validation methods are required to guide the development of the underlying models. The aim of this project was to assess the suitability of an ultrasonic method to monitor the condition of lubrication at the aforementioned contacts by measuring film thickness. Though various techniques involving optical and electrical principles have been employed in the past they generally require the cylinder of the engine to be penetrated and implementation. for the most part. is limited to the test cell. The results of investigations at the piston ring contact have shown that the ultrasonic technique can be used to measure lubricant film thickness and have shown the influence of cylinder pressure and reciprocating speed. Measurements correlate well with work by other authors using the alternative methods mentioned. giving confidence in the robustness of the method. Film measurements at the skirt have been also been successful. not only in quantifying the minimum films present. but also in detailing the profile of the film over its surface and enabling some of the secondary motions of the piston to be deduced. It has been shown that the ultrasonic technique offers the ability and freedom to measure film thickness within an operational engine whilst having the distinct advantage of limiting the degree structural modification required. It shows promise as a research tool and with further development. offers the potential to be incorporated into a lubricant monitoring and control System to help reduce friction losses and emissions.

Download or read book Development of a Novel Ultrasonic Method for Non invasive Measurement of Oil Films in Piston Ring Contacts written by Emin Yusuf Avan and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Piston ring-liner contact in an internal combustion engine highly influences the amount of friction, oil consumption and wear that occurs. Proper lubrication of this contact is, therefore, necessary and is an important research area for the engine manufacturers to improve fuel efficiency and achieve the emission reduction targets proposed by authorities. However, the lubricant film formed in piston ring-liner contact is very thin and its measurement is challenging. Although the computer simulations, a low cost tool, are widely used to estimate the piston ring-liner interactions, they require a robust data for the validation of the mathematical models. In the past several techniques based on optical or electrical characteristics of the lubricant have been developed and applied to measure lubricant film thickness in piston rings, such as capacitance, resistance, eddy current and laser induced fluorescence methods. The main characteristic of these techniques is that they are invasive and require access to the piston ring-liner contact, and so penetrate the cylinder liner. Hence these measurement methods disturb the nature of the contact and influence ring lubrication. This thesis demonstrates the development of a novel ultrasonic method for non-invasive measurement of oil films within the piston ring contacts and the feasibility of the technique on a reciprocating test rig and a fired engine. After successful implementations of ultrasonic technique, the investigation results showed that the ultrasound technique can be used for the piston ring film thickness measurement. The ultrasonically measured film thickness values were consistent with those of other published data in the literature. The effects of load, speed and viscosity on the lubricant film formation were shown in the reciprocator tests. The investigation of the single cylinder engine test showed that the bespoke ultrasonic sensors could survive at high temperature that liner exterior surface experienced. The minimum lubricant films between the compression ring and liner were measured during the engine's power stroke and were typically less than 1 μm at TDC and ~4 μm at mid stroke. It has been shown that the ultrasonic technique demonstrates significant promise as a non-invasive and effective tool to assess the lubricant condition within the ring-liner contact. As being insensitive to test environment and more compact technique compared to the current measurement technologies, the ultrasonic method has a potential to be employed in a test vehicle.

Download or read book Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In Situ written by Michele Schirru and published by Springer. This book was released on 2017-02-21 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a novel ultrasonic instrument for non-invasive and in-situ characterization of journal bearing lubricant viscosity. In particular, the application to journal bearings is described by non-invasively measuring the viscosity and localized power losses throughout operation. This ultrasonic viscometer is based on the reflection of polarized shear waves from a thin resonating coating layer to increase the measurement sensitivity, in comparison to conventional ultrasonic methods. This instrument allows for a full engine oil viscoelastic characterization in-situ. The book investigates the effects of temperature, pressure and shear rate, and describes in detail the ultrasonic setup and method. Further, it demonstrates that the same technique can be applied similarly to monitor the lubrication of other engine components. As such, it offers a unique instrument that can drive the research of oil formulations to improve engine performance and fulfill the requirements of international fuel economy regulations.

Download or read book Analysis of Lubricant Film Thickness and Distribution Along the Piston ring liner Interface in a Reciprocating Engine written by Steven Michael Casey and published by . This book was released on 1998 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultrasonic Measurements of the Piston Ring Lubricant Film Thickness in Three Different Sized Engines written by Jack Rooke and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Tribology written by Rahnejat Homer and published by World Scientific. This book was released on 1998-10-20 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings -- journal bearings, thrust bearings and externally pressurised bearings -- are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons. The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions. This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Vehicular Engine Design written by Kevin Hoag and published by Springer Science & Business Media. This book was released on 2007-02-05 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical engineering curriculum in most universities includes at least one elective course on the subject of reciprocating piston engines. The majority of these courses today emphasize the application of thermodynamics to engine ef?ciency, performance, combustion, and emissions. There are several very good textbooks that support education in these aspects of engine development. However, in most companies engaged in engine development there are far more engineers working in the areas of design and mechanical development. University studies should include opportunities that prepare engineers desiring to work in these aspects of engine development as well. My colleagues and I have undertaken the development of a series of graduate courses in engine design and mechanical development. In doing so it becomes quickly apparent that no suitable te- book exists in support of such courses. This book was written in the hopes of beginning to address the need for an engineering-based introductory text in engine design and mechanical development. It is of necessity an overview. Its focus is limited to reciprocating-piston internal-combustion engines – both diesel and spa- ignition engines. Emphasis is speci?cally on automobile engines, although much of the discussion applies to larger and smaller engines as well. A further intent of this book is to provide a concise reference volume on engine design and mechanical development processes for engineers serving the engine industry. It is intended to provide basic information and most of the chapters include recent references to guide more in-depth study.

Download or read book Principles of Tribology written by Shizhu Wen and published by John Wiley & Sons. This book was released on 2012-02-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professors Wen and Huang present current developments in tribology research along with tribology fundamentals and applications, including lubrication theory, lubrication design, friction mechanism, wear mechanism, friction control, and their applications. In addition to classical tribology, Wen and Huang cover the research areas of the modern tribology, as well as the regularities and characteristics of tribological phenomena in practice. Furthermore, the authors present the basic theory, numerical analysis methods, and experimental measuring techniques of tribology as well as their applications in engineering. Provides a systematic presentation of tribology fundamentals and their applications Discusses the current states and development trends in tribology research Applies the applications to modern day engineering Computer programs available for download from the book’s companion site Principles of Tribology is aimed at postgraduates and senior-level undergraduates studying tribology, and can be used for courses covering theory and applications. Tribology professionals and students specializing in allied areas of mechanical engineering and materials science will also find the book to be a helpful reference or introduction to the topic. Companion website for the book: www.wiley.com/go/wen/tribology

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. A comprehensive introduction to a system of monitoring critical industrial equipment Optimize the availability of process machinery and greatly reduce the cost of maintenance Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Encyclopedia of Renewable and Sustainable Materials written by and published by Elsevier. This book was released on 2020-01-09 with total page 4238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable and Sustainable Materials, Five Volume Set provides a comprehensive overview, covering research and development on all aspects of renewable, recyclable and sustainable materials. The use of renewable and sustainable materials in building construction, the automotive sector, energy, textiles and others can create markets for agricultural products and additional revenue streams for farmers, as well as significantly reduce carbon dioxide (CO2) emissions, manufacturing energy requirements, manufacturing costs and waste. This book provides researchers, students and professionals in materials science and engineering with tactics and information as they face increasingly complex challenges around the development, selection and use of construction and manufacturing materials. Covers a broad range of topics not available elsewhere in one resource Arranged thematically for ease of navigation Discusses key features on processing, use, application and the environmental benefits of renewable and sustainable materials Contains a special focus on sustainability that will lead to the reduction of carbon emissions and enhance protection of the natural environment with regard to sustainable materials

Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.

Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Download or read book Diesel Engine System Design written by Qianfan Xin and published by Elsevier. This book was released on 2011-05-26 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle. Links everything diesel engineers need to know about engine performance and system design featuring essential topics and techniques to solve practical design problems Focuses on engine performance and system integration including important approaches for modelling and analysis Explores fundamental concepts and generic techniques in diesel engine system design incorporating durability, reliability and optimization theories

Download or read book Springer Handbook of Materials Measurement Methods written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2007-04-13 with total page 1215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook compiles advanced methods for materials measurement and characterization from the macroscopic to the nano-scale. Materials professionals need not only handbooks of materials data but clear guidelines and standards for how to measure the full spectrum of materials characteristics of new materials ans systems. Since materials science forms a bridge between the more traditonal fields of physics, engineering, and chemistry, unifying the varying perspectives and covering the full gamut of properties also serves a useful purpose. This handbook is the first dedicated to these practical and important considerations.