Download or read book Semiconductor Photocatalysis written by Wenbin Cao and published by BoD – Books on Demand. This book was released on 2016-08-24 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is a hot topic because it is an environmentally friendly approach toward the conversion of light energy into chemical energy at mild reaction environments. Also, it is well applied in several major areas such as water splitting, bacterial inactivation, and pollutants elimination, which is a possible solution to energy shortage and environmental issues. The fundamental knowledge and the frontier research progress in typical photocatalytic materials, such as TiO2-based and non-TiO2-based photocatalysts, are included in this book. Methods to improve the photocatalytic efficiency and to provide a hint for the rational design of the new photocatalysts are covered.

Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.

Download or read book Nanostructured Materials for Visible Light Photocatalysis written by Arpan Kumar Nayak and published by Elsevier. This book was released on 2021-10-10 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Materials for Visible Light Photocatalysis describes the various methods of synthesizing different classes of nanostructured materials that are used as photocatalysts for the degradation of organic hazardous dyes under visible light irradiation. The first three chapters include a general introduction, basic principles, mechanisms, and synthesis methods of nanomaterials for visible light photocatalysis. Recent advances in carbon, bismuth series, transition metal oxide and chalcogenides-based nanostructured materials for visible light photocatalysis are discussed. Later chapters describe the role of phosphides, nitrides, and rare earth-based nanostructured-based materials in visible light photocatalysis, as well as the characteristics, synthesis, and fabrication of photocatalysts. The role of doping, composites, defects, different facets, morphology of nanostructured materials and green technology for efficient dye removal under visible-light irradiation are also explored. Other topics covered include large-scale production of nanostructured materials, the challenges in present photocatalytic research, the future scope of nanostructured materials regarding environmental hazard remediation under visible light, and solar light harvesting. This book is a valuable reference to researchers and enables them to learn more about designing advanced nanostructured materials for wastewater treatment and visible-light irradiation. - Covers all the recent developments of nanostructured photocatalytic materials - Provides a clear overview of the mechanism of visible light photocatalysis and the controlled synthesis of nanostructured materials - Assesses the major challenges of creating visible light photocatalysis systems at the nanoscale

Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.

Download or read book TiO2 Photocatalysis written by Akira Fujishima and published by . This book was released on 1999 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heterogeneous Photocatalysis written by M. Schiavello and published by . This book was released on 1997-10-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is a reaction which is accelerated by light while a heterogeneous reaction consists of two phases ( a solid and a liquid for example). Heterogeneous Photocatalysis is a fast developing science which to date has not been fully detailed in a monograph. This title discusses the basic principles of heterogeneous photocatalysis and describes the bulk and surface properties of semiconductors. Applications of various types of photoreactions are described and the problems related to the modeling and design of photoreactors are covered.

Download or read book Current Developments in Photocatalysis and Photocatalytic Materials written by Xinchen Wang and published by Elsevier. This book was released on 2019-11-29 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalytic materials can improve the efficiency and sustainability of processes and offer novel ways to address issues across a wide range of fields—from sustainable chemistry and energy production to environmental remediation. Current Developments in Photocatalysis and Photocatalytic Materials provides an overview of the latest advances in this field, offering insight into the chemistry and activity of the latest generation of photocatalytic materials.After an introduction to photocatalysis and photocatalytic materials, this book goes on to outline a wide selection of photocatalytic materials, not only covering typical metal oxide photocatalysts such as TiO2 but also exploring newly developed organic semiconducting photocatalysts, such as g-C3N4.Drawing on the experience of an expert team of contributors, Current Developments in Photocatalysis and Photocatalytic Materials highlights the new horizons of photocatalysis, in which photocatalytic materials will come to play an important role in our day-to-day lives. - Reviews developments in both organic- and inorganic-based materials for use in photocatalysis - Presents the fundamental chemistry and activity of a broad range of key photocatalytic materials, including both typical and novel materials - Highlights the role photocatalytic materials can play in sustainable applications

Download or read book Heterogeneous Photochemical Electron Transfer written by Michael Gratzel and published by . This book was released on 1989 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Oxide Based Photocatalysis written by Adriana Zaleska-Medynska and published by Elsevier. This book was released on 2018-04-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Photocatalysis: Fundamentals and Prospects for Application explains the principles and fundamentals of metal oxide-based photocatalysis and the requirements necessary for their use in photocatalysis. It also discusses preparation methods for photocatalysis, and the advantages, disadvantages and achievements of the most important metal oxides (TiO2, ZnO, Fe2O3, Ta2O3, CuO, NiO, Cr2O3, RuO2, etc.). The book concludes with the most important photocatalytic applications and an overview of the future. Applications are organized by potential needs and solutions, addressing such areas as water treatment, hydrogen production, air treatment, chemical synthesis, and applications in medicine and construction. - Provides coverage of applications, presenting needs and solutions - Covers essential applications, such as water treatment, hydrogen production, air depollution, medical applications, and much more - Includes the characterization of the most important metal oxides used in heterogeneous photocatalysis

Download or read book Introduction to Photocatalysis written by Yoshio Nosaka and published by Royal Society of Chemistry. This book was released on 2019-03-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the basic science of semiconductor photocatalysis together with the various practical applications, this textbook is ideal for graduate students. It covers fundamental principles and applicable techniques of light, solid state physics, electrochemistry, reaction kinetics, and materials processing. A solid understanding of semiconductor photoelectrochemistry is developed through discussing the basic properties of a representative photocatalytic material, TiO2; the basic science of the light absorption phenomenon and the application to the powder suspension useful for the photocatalytic research; and the electronic state of semiconductors. Following this, the textbook moves on to explore photoelectrochemistry; the mechanism and kinetic analysis of photocatalytic reactions; typical fabrication methods of common photocatalysts and the factors for improving photocatalytic activity; and evaluation methods of photocatalytic activity. The textbook concludes by looking at the future prospects of the applications of photocatalysis. This introductory textbook provides a foundation in photocatalysis to supplement graduate courses in catalysis, environmental science, materials science and chemical engineering.

Download or read book Visible Light Active Photocatalysis written by Srabanti Ghosh and published by John Wiley & Sons. This book was released on 2018-06-11 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and timely overview of this important and hot topic, with special emphasis placed on environmental applications and the potential for solar light harvesting. Following introductory chapters on environmental photocatalysis, water splitting, and applications in synthetic chemistry, further chapters focus on the synthesis and design of photocatalysts, solar energy conversion, and such environmental aspects as the removal of water pollutants, photocatalytic conversion of CO2. Besides metal oxide-based photocatalysts, the authors cover other relevant material classes including carbon-based nanomaterials and novel hybrid materials. Chapters on mechanistic aspects, computational modeling of photocatalysis and Challenges and perspectives of solar reactor design for industrial applications complete this unique survey of the subject. With its in-depth discussions ranging from a comprehensive understanding to the engineering of materials and applied devices, this is an invaluable resource for a range of disciplines.

Download or read book Photocatalytic Systems by Design written by Mohan Sakar and published by Elsevier. This book was released on 2021-08-20 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalytic Systems by Design: Materials, Mechanisms and Applications explores various aspects of photocatalysis, including the photocatalytic phenomenon and process, applications, and the design of photocatalysts via band gap engineering. The book also covers band edge position engineering for multiple photocatalytic applications, such as pollutant degradations, hydrogen production, CO2 reduction into hydrocarbon fuels, antimicrobial disinfections, organic synthesis, N2 fixation, and more. This book is designed to enable beginners to learn the concepts and applications of photocatalysis. Unlike conventional books on photocatalysis, the book provides a 360° perspective into the field of photocatalysis and serves as an informative handbook for all audiences. Addresses all concepts and applications of photocatalysis Covers the fundamentals, including mechanisms of photocatalytic materials Describes the various material systems and engineering of photocatalysts Offers insight into the schemes for photocatalysis of various materials Discusses the application-specific design of photocatalysts

Download or read book Environmentally Benign Photocatalysts written by Masakazu Anpo and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, mankind has observed an unprecedented and remarkable growth in industry, resulting in a more prosperous lifestyle for peoples of many countries. In developing countries, however, explosive industrial growth is just now beginning to raise the living standards of the people. Most industries, especially in these developing countries, are still powered by the burning of fossil fuels; con- quently, a lack of clean energy resources has caused environmental pollution on an unprecedented large and global scale. Toxic wastes have been relentlessly released into the air and water leading to serious and devastating environmental and health problems while endangering the planet and life itself with the effects of global warming. To address these urgent environmental issues, new catalytic and photocatalytic processes as well as open-atmospheric systems are presently being developed that can operate at room temperature while being totally clean and ef?cient and thus environmentally harmonious. Essential to technologies harnessing the abundant solar energy that reaches the earth are the highly functional photocatalytic proce- es that can utilize not only UV light, but also visible light.

Download or read book Photocatalytic Semiconductors written by Aracely Hernández-Ramírez and published by Springer. This book was released on 2014-11-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical volume examines the different methods used for the synthesis of a great number of photocatalysts, including TiO2, ZnO and other modified semiconductors, as well as characterization techniques used for determining the optical, structural and morphological properties of the semiconducting materials. Additionally, the authors discuss photoelectrochemical methods for determining the light activity of the photocatalytic semiconductors by means of measurement of properties such as band gap energy, flat band potential and kinetics of hole and electron transfer. Photocatalytic Semiconductors: Synthesis, Characterization and Environmental Applications provide an overview of the semiconductor materials from first- to third-generation photocatalysts and their applications in wastewater treatment and water disinfection. The book further presents economic and toxicological aspects in the production and application of photocatalytic materials.

Download or read book Nanocomposites for Visible Light induced Photocatalysis written by Mohammad Mansoob Khan and published by Springer. This book was released on 2017-09-07 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the chemistry of visible light-induced photocatalysis using different classes of nanocomposites. Starting with a general introduction and explanation of basic principles and mechanisms of (visible) light-induced photocatalysis in the first two chapters (not omitting a plaidoyer for furthering research and development in this promising field), the following chapters detail the different types and classes of nanocomposites currently used in light-induced photocatalytic applications, including e.g. metal and mixed metal-oxide nanoparticles and –composites, nanoporous materials, polymeric and carbon-based nanocomposites. They explain the characteristics and importance of the different types of nanocomposites, as well as their synthesis and fabrication.In the end of the book an outlook on the unique applications of novel nanocomposites is offered, for example in water treatment and disinfection and removal of pollutants from wastewater, self-cleaning window panes based on photoactive materials, and many more. The book also addresses the challenges in present photocatalytic research, and therefore is a must-read for everybody interested in the developing field of nanocomposites and visible light-induced photocatalysis.

Download or read book Nanostructured Photocatalysts written by Hiromi Yamashita and published by Springer. This book was released on 2016-05-03 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on semiconductor TiO2 photocatalysis are legion, nanostructured controlled photocatalysts are attractive beyond standard semiconductors, and this book is devoted to the many novel uses of advanced TiO2 and MOF-based photocatalysts. Details on synthesis, characterization, and reaction applications of nanostructured photocatalysts are summarized. Other new materials discussed in this book are Bi- W- oxides, metal complexes, and unique porous materials. This book contains methods of preparation and characterization of unique nanostructured photocatalysts, and details about their catalytic action. Contributors to this volume are leading Asian researchers in Photocatalysis. It will appeal to researchers wishing to know how to design new types of photocatalysts with controlled nanostructures.

Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.