Download or read book Transmutation and Energy production with High Power Accelerators written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Utilization of Accelerators for Transmutation and Energy Production written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the increased concern over reliable, emission-free power, nuclear power has experienced a resurgence of interest. A sub-critical accelerator driven system (ADS) can drive systems that have either safety constraints (waste transmutation) or reduced fissile content (thorium reactor). The goals of ADS are some or all of the following: (1) to significantly reduce the generation or impacts due to the minor actinides on the packing density and long-term radiotoxicity in the repository design, (2) preserve/use the energy-rich component of used nuclear fuel, and (3) reduce proliferation risk. ADS systems have been actively studied in Europe and Asia over the past two decades and renewed interest is occurring in the U.S. This talk will cover some of the history, possible applicable fuel cycle scenarios, and general issues to be considered in implementing ADS systems.
Download or read book High Power Linear Accelerators for Tritium Production and Transmutation of Nuclear Waste written by G.P. Lawrence and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Power Linear Accelerators for Tritium Production and Transmutation of Nuclear Waste written by and published by . This book was released on 1990 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton linacs driving high-flux spallation neutron sources are being considered for transmutation of nuclear waste and production of tritium. Advances in high-current linac technology have provided a basis for the development of credible designs for the required accelerator, which has a nominal 1.6-GeV energy, and a 250-mA cw current. A beam with these parameters incident on a liquid lead-bismuth (Pb-Bi) target can generate a thermal neutron flux of up to 5 × 1016 n/cm2-s in a cylindrical blanket surrounding the spallation source. This high flux can produce tritium through the 6Li(n, [alpha])T or 3He(n, [gamma])T reactions, or can burn long-lived actinides and fission products from nuclear waste through capture and fission processes. In some system scenarios, waste actinides and/or other fissile materials in the blanket can produce sufficient fission energy to power the accelerator.
Download or read book Apparatus for Nuclear Transmutation and Power Production Using an Intense Accelerator generated Thermal Neutron Flux written by and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux. High thermal neutron fluxes generated from the action of a high power proton accelerator on a spallation target allows the efficient burn-up of higher actinide nuclear waste by a two-step process. Additionally, rapid burn-up of fission product waste for nuclides having small thermal neutron cross sections, and the practicality of small material inventories while achieving significant throughput derive from employment of such high fluxes. Several nuclear technology problems are addressed including 1. nuclear energy production without a waste stream requiring storage on a geological timescale, 2. the burn-up of defense and commercial nuclear waste, and 3. the production of defense nuclear material. The apparatus includes an accelerator, a target for neutron production surrounded by a blanket region for transmutation, a turbine for electric power production, and a chemical processing facility. In all applications, the accelerator power may be generated internally from fission and the waste produced thereby is transmuted internally so that waste management might not be required beyond the human lifespan.
Download or read book Accelerator Technology for Los Alamos Nuclear waste transmutation and Energy production Concepts written by and published by . This book was released on 1991 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powerful proton linacs are being studied at Los Alamos as drivers for high-flux neutron sources that can transmute long-lived fission products and actinides in defense nuclear waste, and also as drivers of advanced fission-energy systems that could generate electric power with no long-term waste legacy. A transmuter fed by an 800-MeV, 140-mA cw conventional copper linac could destroy the accumulated 99Tc and 129I at the DOE's Hanford site within 30 years. A high-efficiency 1200-MeV, 140-mA niobium superconducting linac could drive an energy-producing system generating 1-GWe electric power. Preliminary design concepts for these different high-power linacs are discussed, along with the principal technical issues and the status of the technology base. 9 refs., 5 figs., 4 tabs.
Download or read book Proceedings of the Workshop on Applications of High Intensity Proton Accelerators Fermilab Chicago 19 21 October 2009 written by Rajendran Raja and published by World Scientific. This book was released on 2010 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting radiofrequency linac development at Fermilab / S.D. Holmes -- Rare muon decay experiments / Y. Kuno -- Rare kaon decays / D. Bryman -- Muon collider / R.B. Palmer -- Neutrino factories / S. Geer -- ADS and its potential / J.-P. Revol -- ADS history in the USA / R.L. Sheffield and E.J. Pitcher -- Accelerator driven transmutation of waste : high power accelerator for the European ADS demonstrator / J.L. Biarrotte and T. Junquera -- Myrrha, technology development for the realisation of ADS in EU : current status & prospects for realisation / R. Fernandez [und weitere] -- High intensity proton beam production with cyclotrons / J. Grillenberger and M. Seidel -- FFAG for high intensity proton accelerator / Y. Mori -- Kaon yields for 2 to 8 GeV proton beams / K.K. Gudima, N.V. Mokhov and S.I. Striganov -- Pion yield studies for proton driver beams of 2-8 GeV kinetic energy for stopped muon and low-energy muon decay experiments / S.I. Striganov -- J-Parc accelerator status and future plans / H. Kobayashi -- Simulation and verification of DPA in materials / N.V. Mokhov, I.L. Rakhno and S.I. Striganov -- Performance and operational experience of the CNGS facility / E. Gschwendtner -- Particle physics enabled with super-conducting RF technology - summary of working group 1 / D. Jaffe and R. Tschirhart -- Proton beam requirements for a neutrino factory and muon collider / M.S. Zisman -- Proton bunching options / R.B. Palmer -- CW SRF H linac as a proton driver for muon colliders and neutrino factories / M. Popovic, C.M. Ankenbrandt and R.P. Johnson -- Rapid cycling synchrotron option for Project X / W. Chou -- Linac-based proton driver for a neutrino factory / R. Garoby [und weitere] -- Pion production for neutrino factories and muon colliders / N.V. Mokhov [und weitere] -- Proton bunch compression strategies / V. Lebedev -- Accelerator test facility for muon collider and neutrino factory R & D / V. Shiltsev -- The superconducting RF linac for muon collider and neutrino factory - summary of working group 2 / J. Galambos, R. Garoby and S. Geer -- Prospects for a very high power CW SRF linac / R.A. Rimmer -- Indian accelerator program for ADS applications / V.C. Sahni and P. Singh -- Ion accelerator activities at VECC (particularly, operating at low temperature) / R.K. Bhandari -- Chinese efforts in high intensity proton accelerators / S. Fu, J. Wang and S. Fang -- ADSR activity in the UK / R.J. Barlow -- ADS development in Japan / K. Kikuchi -- Project-X, SRF, and very large power stations / C.M. Ankenbrandt, R.P. Johnson and M. Popovic -- Power production and ADS / R. Raja -- Experimental neutron source facility based on accelerator driven system / Y. Gohar -- Transmutation mission / W.S. Yang -- Safety performance and issues / J.E. Cahalan -- Spallation target design for accelerator-driven systems / Y. Gohar -- Design considerations for accelerator transmutation of waste system / W.S. Yang -- Japan ADS program / T. Sasa -- Overview of members states' and IAEA activities in the field of Accelerator Driven Systems (ADS) / A. Stanculescu -- Linac for ADS applications - accelerator technologies / R.W. Garnett and R.L. Sheffield -- SRF linacs and accelerator driven sub-critical systems - summary working groups 3 & 4 / J. Delayen -- Production of Actinium-225 via high energy proton induced spallation of Thorium-232 / J. Harvey [und weitere] -- Search for the electric dipole moment of Radium-225 / R.J. Holt, Z.-T. Lu and R. Mueller -- SRF linac and material science and medicine - summary of working group 5 / J. Nolen, E. Pitcher and H. Kirk
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book Accelerator Physics Technology and Applications written by Alex Chao and published by World Scientific. This book was released on 2004 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally invented for generating the first artificial nuclear reactions, particle accelerators have undergone, during the past 80 years, a fascinating development that is an impressive example of the inventiveness and perseverance of scientists and engineers. Since the early 1980s, accelerator science and technology has been booming. Today, accelerators are the prime tool for high energy physics to probe the structure of matter to an unknown depth. They are also, as synchrotron radiation sources, the most versatile tool for characterizing materials and processes and for producing micro- and nanostructured devices. The determination of the structure of large biomolecules is presently among the best examples of the application of synchrotron radiation. Finally, accelerators have grown more and more important for medicine, which is relying on them for advanced cancer therapy and radio-surgery. And there are more applications, including the generation of neutrons for materials science, the transmutation of nuclear waste with simultaneous production of electrical power, the sterilization of medical supplies and of foodstuff, and the inspection of trucks by customs or security services.This book is meant to provide basic training in modern accelerators for students, teachers, and interested scientists and engineers working in other fields. It is a result of the 3rd International Accelerator School, held in 2002 in Singapore under the auspices of the Overseas Chinese Physics Association (OCPA). Reputable experts, including a recent prize-winner, cover the field of cyclic and linear accelerators from the basic theoretical tools to forefront developments such as the X-ray free electron laser or the latest proton therapy facilities under construction.Accelerators, the art of building them, and the science for understanding their function have become a very exciting field of research. This book conveys the excitement of the experts to the reader.The proceedings have been selected for coverage in: ? Index to Scientific & Technical Proceedings? (ISTP? / ISI Proceedings)? Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)? CC Proceedings ? Engineering & Physical Sciences
Download or read book Status of Accelerator Driven Systems Research and Technology Development written by International Atomic Energy Agency and published by IAEA Tecdoc. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Download or read book Nuclear Science Utilisation and Reliability of High Power Proton Accelerators Workshop Proceedings Mito Japan 13 15 October 1998 written by Nuclear Energy Agency and published by OECD Publishing. This book was released on 2000-03-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this conference proceedings, the use of high power particle accelerators in various areas of applied nuclear science is presented with special emphasis on accelerator driven reactor systems (ADS) for transmutation of nuclear waste.
Download or read book Reviews Of Accelerator Science And Technology Volume 8 Accelerator Applications In Energy And Security written by Alexander Wu Chao and published by World Scientific. This book was released on 2016-03-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: As accelerator science and technology progressed over the past several decades, the accelerators themselves have undergone major improvements in multiple performance factors: beam energy, beam power, and beam brightness. As a consequence, accelerators have found applications in a wide range of fields in our life and in our society. The current volume is dedicated to applications in energy and security, two of the most important and urgent topics in today's world.This volume makes an effort to provide a review as complete and up to date as possible of this broad and challenging subject. It contains overviews on each of the two topics and a series of articles for in-depth discussions including heavy ion accelerator driven inertial fusion, linear accelerator-based ADS systems, circular accelerator-based ADS systems, accelerator-reactor interface, accelerators for fusion material testing, cargo inspection, proton radiography, compact neutron generators and detectors. It also has a review article on accelerator science and technology in Canada with a focus on the TRIUMF laboratory, and an article on the life of Bruno Touschek, a renowned accelerator physicist.
Download or read book Nuclear Data for Science and Technology written by Syed M. Qaim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the Proceedings of the International Conference on Nuclear Data for Science and Technology held at Jillich in May 1991. The conference was in a series of application oriented nuclear data conferences organized in the past under the auspices of the Nuclear Energy Agency-Nuclear Data Committee (NEANDC) and with the support of the Nuclear Energy Agency-Committee on Reactor Physics (NEACRP). It was the fIrst international conference on nuclear data held in Germany, with the scientific responsibility entrusted to the Institute of Nuclear Chemistry of the Research Centre Jillich. The scientific programme was established by the International Programme Committee in consultation with the International Advisers, and the NEA and IAEA cooperated in the organization. A total of 328 persons from 37 countries and fIve international organizations participated. The scope of these Proceedings extends to a wide range of interdisciplinary topics dealing with measu rement, calculation, evaluation and application of nuclear data, with a major emphasis on numerical data. Both energy and non-energy related applications are considered and due attention is given to some fundamental aspects relevant to the understanding of nuclear data.
Download or read book Radioactive Waste Management written by and published by . This book was released on 1981 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book European Particle Accelerator Conference Epac 94 In 3 Volumes written by Christine Petit-jean-genaz and published by World Scientific. This book was released on 1994-11-26 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings aim to provide a comprehensive overview of research, technology and applications in the field of accelerators. Contributions from the entire field of accelerators are presented, including low and high energy machines, and medical and industrial accelerators.
Download or read book Nuclear Wastes written by National Research Council and published by National Academies Press. This book was released on 1996-02-23 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disposal of radioactive waste from nuclear weapons production and power generation has caused public outcry and political consternation. Nuclear Wastes presents a critical review of some waste management and disposal alternatives to the current national policy of direct disposal of light water reactor spent fuel. The book offers clearcut conclusions for what the nation should do today and what solutions should be explored for tomorrow. The committee examines the currently used "once-through" fuel cycle versus different alternatives of separations and transmutation technology systems, by which hazardous radionuclides are converted to nuclides that are either stable or radioactive with short half-lives. The volume provides detailed findings and conclusions about the status and feasibility of plutonium extraction and more advanced separations technologies, as well as three principal transmutation concepts for commercial reactor spent fuel. The book discusses nuclear proliferation; the U.S. nuclear regulatory structure; issues of health, safety and transportation; the proposed sale of electrical energy as a means of paying for the transmutation system; and other key issues.
Download or read book The Future of Nuclear Power written by John N Lillington and published by Elsevier. This book was released on 2004-10-27 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last century, nuclear power has been established as a reliable source of energy in the major industrialised countries. It has recently enjoyed a revival in attention and research due to the environmental concerns surrounding current conventional energy sources. Issues of regulation and safety are at the forefront of all discussions involving nuclear power, and will govern its place in the future. The Future of Nuclear Power takes a technical and comprehensive look at the current and future status of nuclear power throughout the world. The 17 chapters are divided into two main sections: a review of all current generation plants, and concepts for new advanced reactor design and safety. The broad-ranging topics covered by this publication, coupled with the current revival of interest in nuclear energy, make it a timely reference for all nuclear scientists. - Reviews the issues surrounding the future operation of existing commercial nuclear plants - Several chapters dedicated to the extensive research programs in place concerning safe and reliable operation - Compares nuclear and non-nuclear options for energy needs in the future; evaluating the benefits and risks of both
