Download or read book Predictive Material Modeling written by Mark Kirk and published by ASTM International. This book was released on 2004 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nine papers from a November 2001 American Society for Testing and Materials symposium devoted to prediction of fundamental material behavior and structural response under a range of load conditions are presented by Kirk (U.S. Nuclear and Regulatory Commission) and Natishan (Phoenix Engineering Assoc

Download or read book Fracture Mechanics written by J. P. Gudas and published by ASTM International. This book was released on 1990 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from the 21st National Symposium on Fracture Mechanics, held in Annapolis, Md., June 1988, present new work in elastic-plastic fracture, dynamic fracture, transition fracture in steels, micromechanical aspects of the fracture process, computational mechanics, fracture mechanics testing, and a

Download or read book IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non Homogeneous Materials written by B.L. Karihaloo and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the IUTAM Symposium on "Analytical and Computational Fracture Mechanics of Non-homogeneous Materials", held in Cardiff from 18th to 22nd June 2001. The Symposium was convened to address and place on record topical issues in analytical and computational aspects of the fracture of non-homogeneous materials as they are approached by specialists in mechanics, materials science and related fields. The expertise represented in the Symposium was accordingly very wide, and many of the world's greatest authorities in their respective fields participated. Given the extensive range and scale of non-homogeneous materials, it had to be focussed to enhance the quality and impact of the Symposium. The range of non-homogeneous materials was limited to those that are inhomogeneous at the macroscopic level and/or exhibit strain softening. The issues of micro to macro scaling were not excluded even within this restricted range which covered materials such as rock, concrete, ceramics and composites on the one hand, and, on the other, those metallic materials whose ductile fracture is strongly influenced by the presence of inhomogeneities. The Symposium remained focussed on fundamental research issues of practical significance. These issues have many common features among seemingly disparate non-homogeneous materials.

Download or read book Fracture of Engineering Materials and Structures written by S.H. Teoh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the field of fracture of engineering materials and structures have increasingly indicated its multidisciplinary nature. This area of research now involves scientists and engineers who work in materials science, applied mathematics and mechanics, and also computer scientists. The present volume, which contains the Proceedings of the Joint FEFG/lCF International Conference on Fracture of Engineering Materials and Structures held in Singapore from the 6th to 8th of August 1991, is a testimony of this multidisciplinary nature. This International Conference was the Second Symposium of the Far East Fracture Group (FEFG) and thus provided a unique opportunity for researchers and engineers in the Far East region to exchange and acquire knowledge of new advances and applications in fracture. The Conference was also the Inter-Quadrennial International Conference on Fracture (ICF) for 1991 and thus appealed to researchers in the international arena who wished to take advantage of this meeting to present their findings. The Conference has brought together over 130 participants from more than 24 countries, and they represented government and industrial research laboratories as well as academic institutions. It has thus achieved its objective of bringing together scientists and engineers with different backgrounds and perspectives but with . a common interest in new developments in the fracture of engineering materials and structures. This volume contains 4 keynote papers, 4 invited papers and 130 contributed papers.

Download or read book Advanced Fracture Mechanics and Structural Integrity written by Ashok Saxena and published by CRC Press. This book was released on 2019-02-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fracture Mechanics and Structural Integrity is organized to cover quantitative descriptions of crack growth and fracture phenomena. The mechanics of fracture are explained, emphasizing elastic-plastic and time-dependent fracture mechanics. Applications are presented, using examples from power generation, aerospace, marine, and chemical industries, with focus on predicting the remaining life of structural components and advanced testing metods for structural materials. Numerous examples and end-of-chapter problems are provided, along with references to encourage further study.The book is written for use in an advanced graduate course on fracture mechanics or structural integrity.

Download or read book Nonlinear Fracture Mechanics for Engineers written by Ashok Saxena and published by CRC Press. This book was released on 1998-03-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics is an essential tool for engineers in a number of different engineering disciplines. For example, an engineer in a metals- or plastics-dependent industry might use fracture mechanics to evaluate and characterize materials, while another in aerospace or construction might use fracture mechanics-based methods for product design and service life-time estimation. This balanced treatment, which covers both applied engineering and mathematical aspects of the topic, provides a much-needed multidisciplinary treatment of the field suitable for the many diverse applications of the subject. While texts on linear elastic fracture mechanics abound, no complete treatments of the complex topic of nonlinear fracture mechanics have been available in a textbook format - until now. Written by an author with extensive industry credentials as well as academic experience, Nonlinear Fracture Mechanics for Engineers examines nonlinear fracture mechanics and its applications in mechanics, materials testing, and life prediction of components. The book includes the first-ever complete examination of creep and creep-fatigue crack growth. Examples and problems reinforce the concepts presented. A complete chapter on applications and case studies involving nonlinear fracture mechanics completes this thorough evaluation of this dynamic field of study.

Download or read book Multiscale Phenomena in Plasticity From Experiments to Phenomenology Modelling and Materials Engineering written by Joël Lépinoux and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A profusion of research and results on the mechanical behaviour of crystalline solids has followed the discovery of dislocations in the early thirties. This trend has been enhanced by the development of powerful experimental techniques. particularly X ray diffraction. transmission and scanning electron microscopy. microanalysis. The technological advancement has given rise to the study of various and complex materials. not to speak of those recently invented. whose mechanical properties need to be mastered. either for their lise as structural materials. or more simply for detenllining their fonnability processes. As is often the case this fast growth has been diverted both by the burial of early fundamental results which are rediscovered more or less accurately. and by the too fast publication of inaccurate results. which propagate widely. and are accepted without criticism. Examples of these statements abound. and will not be quoted here for the sake of dispassionateness. Understanding the mechanical properties of materials implies the use of various experimental techniques. combined with a good theoretical knowledge of elasticity. thermodynamics and solid state physics. The recent development of various computer techniques (simulation. ab initio calculations) has added to the difficulty of gathering the experimental information. and mastering the theoretical understanding. No laboratory is equipped with all the possible experimental settings. almost no scientist masters all this theoretical kno\vledge. Therefore. cooperation between scientists is needed more than even before.

Download or read book Shallow Crack Fracture Mechanics Toughness Tests and Applications written by Gyoujin Cho and published by Elsevier. This book was released on 1992-01-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last decade there has been an increasing awareness that use of standards deeply notched fracture mechanics test specimens can result in substantial over-or-under-assessments of the real fracture toughness associated with shallow surface cracks.

Download or read book Mechanisms and Mechanics of Fracture written by John Frederick Knott and published by Minerals, Metals, & Materials Society. This book was released on 2002 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable guide for researchers and industrial engineers in the study of fracture mechanics, as well as for individuals performing failure analysis. Scientists and engineers from around the world have contributed experimental and theoretical papers on the fracture of materials to provide comprehensive coverage of the complete range of fracture, from fundamentals to applications. This volume includes sections on fundamentals of fracture, fracture mechanics, probabilistic approaches to fracture, and advanced materials. It also includes coverage of brittle fracture, ductile fracture, fatigue, statistical approaches, advanced materials, and structural life prediction.

Download or read book Fatigue and Fracture Mechanics written by John H. Underwood and published by ASTM International. This book was released on 1997 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and Phase Transformations in Engineering Materials written by Stephen D. Antolovich and published by . This book was released on 1986 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Random and Multiscale Microstructures written by Dominique Jeulin and published by Springer. This book was released on 2014-05-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews recent theoretical, computational and experimental developments in mechanics of random and multiscale solid materials. The aim is to provide tools for better understanding and prediction of the effects of stochastic (non-periodic) microstructures on materials’ mesoscopic and macroscopic properties. Particular topics involve a review of experimental techniques for the microstructure description, a survey of key methods of probability theory applied to the description and representation of microstructures by random modes, static and dynamic elasticity and non-linear problems in random media via variational principles, stochastic wave propagation, Monte Carlo simulation of random continuous and discrete media, fracture statistics models, and computational micromechanics.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.

Download or read book Topics in Fracture and Fatigue written by A.S. Argon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture in structural materials remains a vital consideration in engineering systems, affecting the reliability of machines throughout their lives. Impressive advances in both the theoretical understanding of fracture mechanisms and practical developments that offer possibilities of control have re-shaped the subject over the past four decades. The contributors to this volume, including some of the most prominent researchers in the field, give their long-range perspectives of the research on the fracture of solids and its achievements. The subjects covered in this volume include: statistics of brittle fracture, transition of fracture from brittle to ductile, mechanics and mechanisms of ductile separation of heterogenous solids, the crack tip environment in ductile fracture, and mechanisms and mechanics of fatigue. Materials considered range from the usual structural solids to composites. The chapters include both theoretical points of view and discussions of key experiments. Contributors include: from MIT, A.S. Argon, D.M. Parks; from Cambridge, M.F. Ashby; from U.C. Santa Barbara, A.G. Evans, R. McMeeking; from Glasgow, J. Hancock; from Harvard, J.W. Hutchinson, J.R. Rice; from Sheffield, K.J. Miller; from Brown, A. Needleman; from the Ecole des Mines, A. Pineau; from U.C. Berkeley, R. O. Ritchie; and from Copenhagen, V. Tvergaard.

Download or read book Introduction to Fracture Mechanics written by Robert O. Ritchie and published by Elsevier. This book was released on 2021-05-27 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fracture Mechanics presents an introduction to the origins, formulation and application of fracture mechanics for the design, safe operation and life prediction in structural materials and components. The book introduces and informs the reader on how fracture mechanics works and how it is so different from other forms of analysis that are used to characterize mechanical properties. Chapters cover foundational topics and the use of linear-elastic fracture mechanics, involving both K-based characterizing parameter and G-based energy approaches, and how to characterize the fracture toughness of materials under plane-strain and non plane-strain conditions using the notion of crack-resistance or R-curves. Other sections cover far more complex nonlinear-elastic fracture mechanics based on the use of the J-integral and the crack-tip opening displacement. These topics largely involve continuum mechanics descriptions of crack initiation, slow crack growth, eventual instability by overload fracture, and subcritical cracking. - Presents how, for a given material, a fracture toughness value can be measured on a small laboratory sample and then used directly to predict the failure (by fracture, fatigue, creep, etc.) of a much larger structure in service - Covers the rudiments of fracture mechanics from the perspective of the philosophy underlying the few principles and the many assumptions that form the basis of the discipline - Provides readers with a "working knowledge" of fracture mechanics, describing its potency for damage-tolerant design, for preventing failures through appropriate life-prediction strategies, and for quantitative failure analysis (fracture diagnostics)

Download or read book Fracture Mechanics written by and published by . This book was released on 1994 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: