Download or read book TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings written by & The Minerals, Metals Materials Society and published by Springer. This book was released on 2019-02-26 with total page 1631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection features papers presented at the 148th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book TMS 2023 152nd Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2023-02-06 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 152nd Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book TMS 2021 150th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2021-02-23 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 150th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2020-02-13 with total page 2046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives written by Eric A. Ott and published by Springer Nature. This book was released on 2023-04-20 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection explores all aspects of metallurgical processing, materials behavior, and microstructural performance for the distinct class of 718-type superalloys and derivatives. Technical topics focus on alloy and process development, production, product applications, trends, and the development of advanced modeling tools. New developments in R&D, new processing methods, 3D printing, and other nontraditional applications also are covered.

Download or read book Microbial Technology for Sustainable E waste Management written by Prasenjit Debbarma and published by Springer Nature. This book was released on 2023-03-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, besides discussing challenges and opportunities, will reveal the microbe-metal interactions and strategies for e-waste remediation in different ecosystems. It will unveil the recent biotechnological advancement and microbiological approach to sustainable biorecycling of e-waste such as bioleaching for heavy metal extraction, valorization of precious metal, biodegradation of e-plastic, the role of the diverse microbial community in e-waste remediation, genetically engineered microbes for e-waste management, the importance of microbial exopolysaccharides in metal biosorption, next-generation technologies, omics-based technologies etc. It also holds the promise to discuss the conservation, utilization and cataloging indigenous microbes in e-waste-polluted niches and promising hybrid technology for sustainable e-waste management. Revolution in the area of information technology and communication is constantly evolving due to scientific research and development. Concurrently, the production of new electrical and electronic equipment also thus uplifting in this era of revolution. These technological advancements certainly have problematic consequences which is the rise of huge amounts of electronic obsoletes or electronic waste (e-waste). Improper management of both hazardous and nonhazardous substances of e-waste led to a major concern in our digital society and environment. Therefore, a sustainable approach including microbial candidates to tackle e-waste is the need of the hour. Nevertheless, the continuous demand for new-generation gadgets and electronics set this high-tech evolution to a new frontier in the last few years. With this continuing trend of technological development, e-waste is expanding exponentially worldwide. In the year of 2019, the worldwide generation of e-waste was approximately 53.6 Mt, of which only about 17.4% of e-waste was collected and recycled, and the other 82.6% was not even documented. E-waste contains various heterogeneous waste complexes such as metals (60%), blends of many polymers (30%) and halogenated compounds, radioactive elements and other pollutants (10%), respectively. The sustainable, efficient, and economic management of e-waste is thus, a challenging task today and in the coming decades. Conventional techniques such as the use of chemicals, incineration and informal ways of e-waste dismantling trigger serious health risks and contamination to the human population and environment, respectively due to the liberation of toxic and hazardous substances from the waste. In this context, bio-candidates especially microorganisms could be sharp-edged biological recycling tools to manage e-waste sustainably. As microbes are omnipresent and diverse in their physiology and functional aspects, they offer a wide range of bioremediation.

Download or read book Recent Advances in Mechanical Infrastructure written by Ajit Kumar Parwani and published by Springer Nature. This book was released on 2019-10-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains high quality papers presented in conference Recent Advances in Mechanical Infrastructure (ICRAM-2019) held at IITRAM, Ahmedabad, India from 20-21 April, 2019.The topics covered in this book are recent advances in thermal infrastructure, manufacturing infrastructure and infrastructure planning and design.

Download or read book Laser beam melting of immiscible FeMn AgX for adapted bioresorbability written by Jan Tobias Krüger and published by BoD – Books on Demand. This book was released on 2023-05-19 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Iron to open up new applications for bioresorbable implants is promising. However, modification of Iron is necessary to adjust the required properties. Alloying with Manganese improves the mechanical performance and increases the degradation rate. Further acceleration of degradation can be adjusting electrochemically noble phases to force the anodic dissolution of the Iron-based matrix. Since Silver and Iron are insoluble in each other, Silver phases can exist in an unmodified Iron-Manganese matrix. Silver is biocompatible and provides an antibacterial effect. If a degradable Silver alloy is used, the Silver phases can degrade after the Iron-Manganese matrix. One way to process metals that are not soluble in each other by melting metallurgy is powder-bed-based selective laser beam melting. The small melt pool, strong melt flow, and rapid solidification enable the inclusion of Silver in the Iron-Manganese matrix. To enable selective tailoring of the morphology, distribution, and chemical composition of the Silver phases, a model was developed for the interaction of the insoluble components in the melt pool and the formation of the Silver phases during laser beam melting. The principle effectiveness of anodic dissolution by Silver phases has been confirmed. However, this does not result in an increased degradation rate, since deposits with a blocking effect are formed.

Download or read book Techno Societal 2018 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2019-11-06 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2018: the 2nd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Download or read book 3D Printing in Podiatric Medicine written by Kamalpreet Sandhu and published by Academic Press. This book was released on 2022-11-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Podiatric Medicine compiles an interdisciplinary range of scientific literature, laboratory developments, industrial implications and futuristic avenues in this field. The book provides recent developments and research breakthroughs in 3D printing in podiatric medicine, such as functionalized feedstock systems, smart products, process characteristics, modeling and optimization of printed systems and products, and industrial applications. It covers best practices for 3D printing methods to capture, document and validate challenges at the early stage of the design process. The book's content then goes into mitigating design strategies to address these challenges without compromising the cost, safety and quality of the device. This book supports new and emerging specializations and provides a comprehensive collection of technical notes, research designs, design methods and processes and case studies. - Includes coverage of the biomechanical behavior of feet, injuries and injury prevention using 3D printed customized orthosis - Uses an amalgamation of CAD/CAM, reverse engineering and artificial intelligence with 3D printing in podiatric medicine - Investigates plantar pressure using gait measurement technologies

Download or read book Environmental Management of Waste Electrical and Electronic Equipment written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2021-04-11 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Management of Waste Electrical and Electronic Equipment illustrates the socioeconomic, technical and environmental perspectives of WEEE, allowing for a better understanding on how to manage this rapidly growing waste stream. The book addresses discharge of WEEE into ecosystems, occupational exposure to hazardous components of WEEE, and loss of recoverable resources, bridging the gap between community and waste management. By providing in-depth analysis and step-by-step descriptions of environmental strategies and procedures for managing electrical and electronic waste, this book is a valuable resource for environmental scientists, environmental engineers, and waste management professionals to achieve sustainability in WEEE. - Presents the latest knowledge on the origin, identification and adverse effects of WEEE on humans and ecosystems - Offers up-to-date analysis on environmental management tools, such as LCA, health risk, legalization, and policies for sustainable solutions for Waste Electrical and Electronic Equipment (WEEE) - Includes details and analysis of the novel approaches proposed in recent years for resource recovery from WEEE

Download or read book Smart and Functional Textiles written by Bapan Adak and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-04-03 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart and Functional Textiles is an application-oriented book covering a wide range of areas from multifunctional nanofinished textiles, coated and laminated textiles, wearable e-textiles, textile-based sensors and actuators, thermoregulating textiles, to smart medical textiles and stimuli-responsive textiles. It also includes chapters on 3D printed smart textiles, automotive smart textiles, smart textiles in military and defense, as well as functional textiles used in care and diagnosis of Covid-19.

Download or read book Metallic Powders for Additive Manufacturing written by Enrique J. Lavernia and published by John Wiley & Sons. This book was released on 2024-03-06 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Powders for Additive Manufacturing Overview of successful pathways for producing metal powders for additive manufacturing of high-performance metallic parts and components with tailored properties Metallic Powders for Additive Manufacturing introduces the readers to the science and technology of atomized metal powders beyond empirical knowledge and the fundamental relationships among the chemistry, microstructure, and morphology of atomized metallic powders and their behavior during additive manufacturing. The text sets a foundation of the underlying science that controls the formation and microstructure of atomized metallic droplets, including the relations among the properties of metallic powders, their performance during the manufacturing processes, and the resulting products. Other topics covered include the influence of powder on defect formation, residual stress, mechanical behavior, and physical properties. The concluding two chapters encompass considerations of broader societal implications and overarching themes, including the exploration of alternative feedstock materials, economic analysis, and sustainability assessment. These chapters offer valuable perspectives on the prospective trajectory of the field. Written by a team of experienced and highly qualified professors and academics, Metallic Powders for Additive Manufacturing includes information on: Atomization techniques such as Vacuum Induction Gas Atomization (VIGA), Electrode Induction Melting Gas Atomization (EIMGA), and Plasma Rotating Electrode Process (PREP) Atomization science and technology, covering control of atomization parameters, powder size distribution, effect of processing variables, and theoretical models of atomization Heat transfer and solidification of droplets, covering nucleation, microstructure development, and important thermal and solidification conditions during atomization Atomization of Al, Fe, Ni, Co, Ti, and high entropy alloys, as well as composite powders for additive manufacturing, and guidelines for atomization equipment and powder handling Fundamental processing principles in a variety of metal additive manufacturing processes Powder characteristics and requirements for different additive manufacturing processes Effect of powder chemistry and physical characteristics on additive manufacturing processes, and the microstructure and properties of the built parts Evaluation of alternative feedstock sources for metal additive manufacturing, beyond gas atomized powder Economic and sustainability perspectives on powder production and additive manufacturing Metallic Powders for Additive Manufacturing is an excellent combination of rigorous fundamentals and a practice-oriented and forward-looking resource on the subject for materials scientists and practicing engineers seeking to understand, optimize, and further develop the field of powder production and additive manufacturing.

Download or read book Amputation Rehabilitation An Issue of Physical Medicine and Rehabilitation Clinics of North America written by Alex Donaghy and published by Elsevier Health Sciences. This book was released on 2024-10-09 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this issue of Physical Medicine and Rehabilitation Clinics, guest editors Drs. Alex Donaghy and Alberto Miranda bring their considerable expertise to the topic of Amputee Rehabilitation. Focusing on advancements and innovations in the field, this issue presents evidence-based reviews and clinical insights from physicians, therapists, and prosthetist/orthotists practicing in a variety of clinical settings. Through these expert perspectives, readers will gain insight into promoting better rehabilitation outcomes and fostering a more inclusive and supportive society for those with limb deficiency. - Contains 16 relevant, practice-oriented topics including the physiatrist's approach to limb loss: from pre-amputation to home; new and emerging techniques in amputation surgery; pain after amputation; health care disparities in limb loss rehabilitation; emerging technology: new concepts in prosthetic design and application; and more. - Provides in-depth clinical reviews on amputee rehabilitation, offering actionable insights for clinical practice. - Presents the latest information on this timely, focused topic under the leadership of experienced editors in the field. Authors synthesize and distill the latest research and practice guidelines to create clinically significant, topic-based reviews.

Download or read book Materials Joining and Processing by Friction Based Technologies written by Jacek Tomków and published by Trans Tech Publications Ltd. This book was released on 2021-07-14 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregated Book

Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.

Download or read book TMS 2018 147th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer. This book was released on 2018-02-03 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection features papers presented at the 147th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.