Download or read book Timing Jitter in Symmetric Load Ring Oscillators and the Estimation of Aperture Uncertainty in A D Converters written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Timing jitter in clock signals presents a limitation to the performance of a variety of applications and systems. The criticality of the issue is discussed with the A-D converter as the backdrop. Timing errors in the sampling clock, the analog input signal and the aperture uncertainty of the A-D converter degrade the signal-to-noise ratio performance. In this thesis, a method to estimate the aperture uncertainty of the converter has been developed. The model accounts for the converter's quantization noise and differential non-linearity errors and thereby improves the accuracy of the estimation. The technique was applied to a 10-Bit converter and the results are presented. For clock generation using PLLs, ring oscillators are attractive from an integration and cost point of view for use as a VCO. Their timing jitter can be improved by increasing the output voltage swing, the gate overdrive of the transistors of the differential pair and the power dissipation while maintaining just a minimum required small signal gain for the delay stage. In this thesis, it is shown that the maximum possible output voltage swing is dependent entirely on technology parameters. The proposed oscillator topology uses an n-MOS differential pair with a class of load elements called the 'symmetric loads' and is designed for the maximum possible output voltage swing. Frequency variation is achieved by driving the body of the symmetric loads in order to keep the swing and hence phase noise constant across frequencies. Also, the frequency vs. body voltage characteristics has been derived and found to be linear. Finally, the proposed theoretical predictions have been validated with simulation results.

Download or read book The Designer s Guide to Jitter in Ring Oscillators written by John A. McNeill and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide emphasizes jitter for time domain applications so that there is not a need to translate from frequency domain. This provides a more direct path to the results for designing in an application area where performance is specified in the time domain. The book includes classification of oscillator types and an exhaustive guide to existing research literature. It also includes classification of measurement techniques to help designers understand how the eventual performance of circuit design is verified.

Download or read book Understanding Jitter and Phase Noise written by Nicola Da Dalt and published by Cambridge University Press. This book was released on 2018-02-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain an intuitive understanding of jitter and phase noise with this authoritative guide. Leading researchers provide expert insights on a wide range of topics, from general theory and the effects of jitter on circuits and systems, to key statistical properties and numerical techniques. Using the tools provided in this book, you will learn how and when jitter and phase noise occur, their relationship with one another, how they can degrade circuit performance, and how to mitigate their effects - all in the context of the most recent research in the field. Examine the impact of jitter in key application areas, including digital circuits and systems, data converters, wirelines, and wireless systems, and learn how to simulate it using the accompanying Matlab code. Supported by additional examples and exercises online, this is a one-stop guide for graduate students and practicing engineers interested in improving the performance of modern electronic circuits and systems.

Download or read book Data Conversion Handbook written by Walt Kester and published by Newnes. This book was released on 2005 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete update of a classic handbook originally created by Analog Devices and never previously published offers the most complete and up-to-date reference available on data conversion, from the world authority on the subject. It describes in depth the theory behind and the practical design of data conversion circuits. It describes the different architectures used in A/D and D/A converters - including many advances that have been made in this technology in recent years - and provides guidelines on which types are best suited for particular applications. It covers error characterization and testing specifications, essential design information that is difficult to find elsewhere. The book also contains a wealth of practical application circuits for interfacing and supporting A/D and D/A converters within an electronic system. In short, everything an electronics engineer needs to know about data converters can be found in this volume, making it an indispensable reference with broad appeal. The accompanying CD-ROM provides software tools for testing and analyzing data converters as well as a searchable pdf version of the text. * brings together a huge amount of information impossible to locate elsewhere. * many recent advances in converter technology simply aren't covered in any other book. * a must-have design reference for any electronics design engineer or technician

Download or read book Deep Space Telecommunications Systems Engineering written by Joseph H. Yuen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge of communication in planetary exploration has been unusual. The guidance and control of spacecraft depend on reliable communication. Scientific data returned to earth are irreplaceable, or replaceable only at the cost of another mission. In deep space, communications propagation is good, relative to terrestrial communications, and there is an opportunity to press toward the mathematical limit of microwave communication. Yet the limits must be approached warily, with reliability as well as channel capacity in mind. Further, the effects of small changes in the earth's atmosphere and the interplanetary plasma have small but important effects on propagation time and hence on the measurement of distance. Advances are almost incredible. Communication capability measured in 18 bits per second at a given range rose by a factor of 10 in the 19 years from Explorer I of 1958 to Voyager of 1977. This improvement was attained through ingenious design based on the sort of penetrating analysis set forth in this book by engineers who took part in a highly detailed and amazingly successful pro gram. Careful observation and analysis have told us much about limitations on the accurate measurement of distance. It is not easy to get busy people to tell others clearly and in detail how they have solved important problems. Joseph H. Yuen and the other contribu tors to this book are to be commended for the time and care they have devoted to explicating one vital aspect of a great adventure of mankind.

Download or read book Semiconductor Detector Systems written by Helmuth Spieler and published by OUP Oxford. This book was released on 2005-08-25 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor sensors patterned at the micron scale combined with custom-designed integrated circuits have revolutionized semiconductor radiation detector systems. Designs covering many square meters with millions of signal channels are now commonplace in high-energy physics and the technology is finding its way into many other fields, ranging from astrophysics to experiments at synchrotron light sources and medical imaging. This book is the first to present a comprehensive discussion of the many facets of highly integrated semiconductor detector systems, covering sensors, signal processing, transistors and circuits, low-noise electronics, and radiation effects. The diversity of design approaches is illustrated in a chapter describing systems in high-energy physics, astronomy, and astrophysics. Finally a chapter "Why things don't work" discusses common pitfalls. Profusely illustrated, this book provides a unique reference in a key area of modern science.

Download or read book Synchro and Resolver Conversion written by Geoffrey S. Boyes and published by Analog Devices Incorporated. This book was released on 1980 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchros and resolvers. Scott connected transformers, the representation of angles in digital form, logic inputs and outputs. Synchro and resolver to digital conversion. Digital to synchro/resolver conversion. Resolvers and inductosyns in machine tool and robot control. Related conversion products. Applications. Common synchro parameters. Synchro and resolver manufacturers. Harmonic distortion of the reference waveform. Speed voltages in resolvers and synchros. Vector rotation algorithms. Effect of quadrature signals on servo systems.

Download or read book Broadband Circuits for Optical Fiber Communication written by Eduard Säckinger and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to the new and emerging field of broadband circuits for optical fiber communication This exciting publication makes it easy for readers to enter into and deepen their knowledge of the new and emerging field of broadband circuits for optical fiber communication. The author's selection and organization of material have been developed, tested, and refined from his many industry courses and seminars. Five types of broadband circuits are discussed in detail: * Transimpedance amplifiers * Limiting amplifiers * Automatic gain control (AGC) amplifiers * Lasers drivers * Modulator drivers Essential background on optical fiber, photodetectors, lasers, modulators, and receiver theory is presented to help readers understand the system environment in which these broadband circuits operate. For each circuit type, the main specifications and their impact on system performance are explained and illustrated with numerical values. Next, the circuit concepts are discussed and illustrated with practical implementations. A broad range of circuits in MESFET, HFET, BJT, HBT, BiCMOS, and CMOS technologies is covered. Emphasis is on circuits for digital, continuous-mode transmission in the 2.5 to 40 Gb/s range, typically used in SONET, SDH, and Gigabit Ethernet applications. Burst-mode circuits for passive optical networks (PON) and analog circuits for hybrid fiber-coax (HFC) cable-TV applications also are discussed. Learning aids are provided throughout the text to help readers grasp and apply difficult concepts and techniques, including: * Chapter summaries that highlight the key points * Problem-and-answer sections to help readers apply their new knowledge * Research directions that point to exciting new technological breakthroughs on the horizon * Product examples that show the performance of actual broadband circuits * Appendices that cover eye diagrams, differential circuits, S parameters, transistors, and technologies * A bibliography that leads readers to more complete and in-depth treatment of specialized topics This is a superior learning tool for upper-level undergraduates and graduate-level students in circuit design and optical fiber communication. Unlike other texts that concentrate on analog circuits in general or mostly on optics, this text provides balanced coverage of electronic, optic, and system issues. Professionals in the fiber optic industry will find it an excellent reference, incorporating the latest technology and discoveries in the industry.

Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.

Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.

Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.

Download or read book The Photomultiplier Handbook written by A. G. Wright and published by Oxford University Press. This book was released on 2017 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Photomultipliers are extremely sensitive light detectors with the capability to detect single photons. In multiplying the charge produced by incident light by up to 100 million times, these devices are essential to a wide range of applications, from medical instrumentation to astronomical observations. This complete and authoritative guide will provide...a deeper understanding of the operating principles of these devices." -- Publisher's description, back cover.

Download or read book Digital and Analogue Instrumentation written by Nihal Kularatna and published by IET. This book was released on 2003 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A substantial update of his earlier IEE book, Modern Electronic Test and Measuring Instruments, the author provides a state-of-the art review of modern families of digital instruments. For each family he covers internal design, use and applications, highlighting their advantages and limitations from a practical application viewpoint.The book also treats new digital instrument families such as DSOs, Arbitrary Function Generators, FFT analysers and many other common systems used by the test engineers, designers and research scientists.

Download or read book Mixed signal and DSP Design Techniques written by Analog Devices, inc and published by Newnes. This book was released on 2003-01-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sampled Data Systems - ADCs for DSP Applications - DACs for DSP Applications - Fast Fourier Transforms - Digital Filters - DSP Hardware - Interfacing to DSPs - DSP Applications - Hardware Design Techniques.

Download or read book Design Modeling and Testing of Data Converters written by Paolo Carbone and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the a scientific discussion of the state-of-the-art techniques and designs for modeling, testing and for the performance analysis of data converters. The focus is put on sustainable data conversion. Sustainability has become a public issue that industries and users can not ignore. Devising environmentally friendly solutions for data conversion designing, modeling and testing is nowadays a requirement that researchers and practitioners must consider in their activities. This book presents the outcome of the IWADC workshop 2011, held in Orvieto, Italy.

Download or read book Analog Digital Conversion written by Analog Devices, inc and published by . This book was released on 2004-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reference Free CMOS Pipeline Analog to Digital Converters written by Michael Figueiredo and published by Springer Science & Business Media. This book was released on 2012-08-24 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows that digitally assisted analog to digital converters are not the only way to cope with poor analog performance caused by technology scaling. It describes various analog design techniques that enhance the area and power efficiency without employing any type of digital calibration circuitry. These techniques consist of self-biasing for PVT enhancement, inverter-based design for improved speed/power ratio, gain-of-two obtained by voltage sum instead of charge redistribution, and current-mode reference shifting instead of voltage reference shifting. Together, these techniques allow enhancing the area and power efficiency of the main building blocks of a multiplying digital-to-analog converter (MDAC) based stage, namely, the flash quantizer, the amplifier, and the switched capacitor network of the MDAC. Complementing the theoretical analyses of the various techniques, a power efficient operational transconductance amplifier is implemented and experimentally characterized. Furthermore, a medium-low resolution reference-free high-speed time-interleaved pipeline ADC employing all mentioned design techniques and circuits is presented, implemented and experimentally characterized. This ADC is said to be reference-free because it precludes any reference voltage, therefore saving power and area, as reference circuits are not necessary. Experimental results demonstrate the potential of the techniques which enabled the implementation of area and power efficient circuits.