Download or read book Three Dimensional Modeling with Geoscientific Information Systems written by A.K. Turner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A. K. TURNER Department of Geology and Geological Engineering Colorado School of Mines Golden, Colorado 80401 USA Geology deals with three-dimensional data. Geoscientists are concerned with three dimensional spatial observations, measurements, and explanations of a great variety of phenomena. The representation of three-dimensional data has always been a problem. Prior to computers, graphical displays involved specialized maps, cross-sections, fence diagrams, and geometrical constructions such as stereonets. All were designed to portray three-dimensional relationships on two-dimensional paper products, and all were time consuming to develop. Until recently, computers were of little assistance to three-dimensional data handling and representation problems. Memory was too expensive to handle the huge amounts of data required by three-dimensional assessments; computational speeds were too slow to perform the necessary calculations within a reasonable time; and graphical displays had too Iowa resolution or were much too expensive to produce useful visualizations. Much experience was gained with two-dimensional geographic information systems (GIS), which were applied to many land-use management and resource assessment problems. The two-dimensional GIS field matured rapidly in the late 1980's and became widely accepted. The advent of the modern computer workstation, with its enhanced memory and graphical capabilities at ever more affordable prices, has largely overcome these earlier constraints.
Download or read book Subsurface Conditions written by Keith Turner and published by Springer. This book was released on 2008-01-26 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of the shallow subsurface has gained in importance as civil and geotechnical engineering and environmental applications have become more dependent on a precise definition of geomechanical and geohydrological properties. A better understanding of the subsurface conditions offers wide-ranging benefits to governments, industry and individual citizens. Subsurface geological modelling became an economic and technologic reality in the late 1980's, when competing 3-D geoscientific information systems were the subject of considerable research and evaluation, especially by the petroleum exploration industry. Investigations in the shallow subsurface impose additional requirements that have only recently become technically and economically achievable. The very shallow urban underground environment, where many infrastructure and utilities elements are located, presents the most difficult characterisation problems. Subsurface modelling techniques have matured, along with modern data base concepts. The evolution of the Internet and Web-browser technologies has expanded information transmission and dissemination capabilities. Subsurface models are being integrated with decision-support systems to provide predictions of technical and economic performance. Yet even the most sophisticated of these models leave some uncertainty in geologic interpretation. A variety of techniques for assessing uncertainty have been developed and are being evaluated.
Download or read book 3D Geoscience Modeling written by Simon Houlding and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of a career spent developing and applying computer techniques for the geosciences. The need for a geoscience modeling reference became apparent during participation in several workshops and conferences on the subject in the last three years. For organizing these, and for the lively discussions that ensued and inevitably contributed to the contents, I thank Keith Turner, Brian Kelk, George Pflug and Johnathan Raper. The total number of colleagues who contributed in various ways over the preceding years to the concepts and techniques presented is beyond count. The book is dedicated to all of them. Compilation of the book would have been impossible without assistance from a number of colleagues who contributed directly. In particular, Ed Rychkun, Joe Ringwald, Dave Elliott, Tom Fisher and Richard Saccany reviewed parts of the text and contributed valuable comment. Mohan Srivastava reviewed and contributed to some of the geostatistical presentations. Mark Stoakes, Peter Dettlaff and Simon Wigzell assisted with computer processing of the many application examples. Anar Khanji and Randal Crombe assisted in preparation of the text and computer images. Klaus Lamers assisted with printing. The US Geological Survey, the British Columbia Ministry of Environment, Dave Elliott and others provided data for the application examples. My sincere thanks to all of them.
Download or read book Cognitive Aspects of Human Computer Interaction for Geographic Information Systems written by T.L. Nyerges and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant part of understanding how people use geographic information and technology concerns human cognition. This book provides the first comprehensive in-depth examination of the cognitive aspects of human-computer interaction for geographic information systems (GIS). Cognitive aspects are treated in relation to individual, group, behavioral, institutional, and cultural perspectives. Extensions of GIS in the form of spatial decision support systems and SDSS for groups are part of the geographic information technology considered. Audience: Geographic information users, systems analysts and system designers, researchers in human-computer interaction will find this book an information resource for understanding cognitive aspects of geographic information technology use, and the methods appropriate for examining this use.
Download or read book Large scale 3D Data Integration written by Sisi Zlatanova and published by CRC Press. This book was released on 2005-10-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-Scale 3D Data Integration: Challenges and Opportunities examines the fundamental aspects of 3D geo-information, focusing on the latest developments in 3D GIS (geographic information) and AEC (architecture, engineering, construction) systems. This book addresses policy makers, designers and engineers, and individuals that need to overco
Download or read book Geographic Information Systems for Geoscientists written by Graeme F. Bonham-Carter and published by Elsevier. This book was released on 2014-05-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geographic Information Systems for Geoscientists: Modelling with GIS provides an introduction to the ideas and practice of GIS to students and professionals from a variety of geoscience backgrounds. The emphasis in the book is to show how spatial data from various sources (principally paper maps, digital images and tabular data from point samples) can be captured in a GIS database, manipulated, and transformed to extract particular features in the data, and combined together to produce new derived maps, that are useful for decision-making and for understanding spatial interrelationship. The book begins by defining the meaning, purpose, and functions of GIS. It then illustrates a typical GIS application. Subsequent chapters discuss methods for organizing spatial data in a GIS; data input and data visualization; transformation of spatial data from one data structure to another; and the combination, analysis, and modeling of maps in both raster and vector formats. This book is intended as both a textbook for a course on GIS, and also for those professional geoscientists who wish to understand something about the subject. Readers with a mathematical bent will get more out of the later chapters, but relatively non-numerate individuals will understand the general purpose and approach, and will be able to apply methods of map modeling to clearly-defined problems.
Download or read book Sustainable Geoscience for Natural Gas SubSurface Systems written by David Wood and published by Gulf Professional Publishing. This book was released on 2021-10-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Geoscience for Natural Gas SubSurface Systems delivers many of the scientific fundamentals needed in the natural gas industry, including coal-seam gas reservoir characterization and fracture analysis modeling for shale and tight gas reservoirs. Advanced research includes machine learning applications for well log and facies analysis, 3D gas property geological modeling, and X-ray CT scanning to reduce environmental hazards. Supported by corporate and academic contributors, along with two well-distinguished editors, the book gives today’s natural gas engineers both fundamentals and advances in a convenient resource, with a zero-carbon future in mind. Includes structured case studies to illustrate how new principles can be applied in practical situations Helps readers understand advanced topics, including machine learning applications to optimize predictions, controls and improve knowledge-based applications Provides tactics to accelerate emission reductions Teaches gas fracturing mechanics aimed at reducing environmental impacts, along with enhanced oil recovery technologies that capture carbon dioxide
Download or read book Three Dimensional Applications In GIS written by Jonathan Raper and published by CRC Press. This book was released on 2020-07-24 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a survey of the approaches used and the problems encountered in the model of real geophysical data.
Download or read book Multidimensional Geographic Information Science written by Jonathan Raper and published by CRC Press. This book was released on 2000-11-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The way people normally view a GIS is 2-dimensional, a greatly limiting form. However, as developments occur within the field, researchers and practitioners are finding ways to make a GIS 3-dimensional, and in some instances even 4-dimensional. Being able to view a GIS in more than 2 dimensions greatly enhances its usability. This forward-lookin
Download or read book Hydrogeologic Evaluation and Numerical Simulation of the Death Valley Regional Ground water Flow System Nevada and California written by and published by . This book was released on 1997 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water resources Investigations Report written by and published by . This book was released on 1996 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geological Prior Information written by Andrew Curtis and published by Geological Society of London. This book was released on 2004 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological prior information represents a new and emerging field within the geosciences. Prior information is the term used to describe previously existing knowledge that can be brought to bear on a new problem. This volume describes a range of methods that can be used to find solutions to practical and theoretical problems using geological prior information, and the nature of geological information that can be so employed.
Download or read book 3D Digital Geological Models written by Andrea Bistacchi and published by John Wiley & Sons. This book was released on 2022-03-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D DIGITAL GEOLOGICAL MODELS Discover the practical aspects of modeling techniques and their applicability on both terrestrial and extraterrestrial structures A wide overlap exists in the methodologies used by geoscientists working on the Earth and those focused on other planetary bodies in the Solar System. Over the course of a series of sessions at the General Assemblies of the European Geosciences Union in Vienna, the intersection found in 3D characterization and modeling of geological and geomorphological structures for all terrestrial bodies in our solar system revealed that there are similar datasets and common techniques for the study of all planets—Earth and beyond—from a geological point-of-view. By looking at Digital Outcrop Models (DOMs), Digital Elevation Models (DEMs), or Shape Models (SM), researchers may achieve digital representations of outcrops, topographic surfaces, or entire small bodies of the Solar System, like asteroids or comet nuclei. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces has two central objectives, to highlight the similarities that geological disciplines have in common when applied to entities in the Solar System, and to encourage interdisciplinary communication and collaboration between different scientific communities. The book particularly focuses on analytical techniques on DOMs, DEMs and SMs that allow for quantitative characterization of outcrops and geomorphological features. It also highlights innovative 3D interpretation and modeling strategies that allow scientists to gain new and more advanced quantitative results on terrestrial and extraterrestrial structures. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces readers will also find: The first volume dedicated to this subject matter that successfully integrates methodology and applications A series of methodological chapters that provide instruction on best practices involving DOMs, DEMs, and SMs A wide range of case studies, including small- to large-scale projects on Earth, Mars, the 67P/Churyumov-Gerasimenko comet, and the Moon Examples of how data collected at surface can help reconstruct 3D subsurface models 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces is a useful reference for academic researchers in earth science, structural geology, geophysics, petroleum geology, remote sensing, geostatistics, and planetary scientists, and graduate students studying in these fields. It will also be of interest for professionals from industry, particularly those in the mining and hydrocarbon fields.
Download or read book Innovations In GIS written by Zarine Kemp and published by CRC Press. This book was released on 2003-09-02 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from presentations made at the fourth annual UK National Conference on GIS Research, this work consists of contributions by leading experts in: geography, mathematics, computing science, surveying, archaeology, planning and medicine.
Download or read book Towards an Integrated Three dimensional Geographic Information System written by Jung-Der Victor Tsai and published by . This book was released on 1994 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Spatio Temporal Analysis written by Xinming Tang and published by CRC Press. This book was released on 2007-08-23 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geographic Information Technology have raised the expectations of users. A static map is no longer enough; there is now demand for a dynamic representation. Time is of great importance when operating on real world geographical phenomena, especially when these are dynamic. Researchers in the field of Temporal Geographical Infor
Download or read book Advances in Geophysics written by Cedric Schmelzbach and published by Academic Press. This book was released on 2018-11-13 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Geophysics is a highly-respected publication in the field of geophysics. Since 1952, each volume has been eagerly awaited, frequently consulted, and praised by researchers and reviewers alike. Now with over 50 volumes, the series contains much material still relevant today – truly an essential publication for researchers in all fields of geophysics. Provides high-level reviews of the latest innovations in geophysics Written by recognized experts in the field Presents an essential publication for researchers in all fields of geophysics
