Download or read book Third Harmonic Utilization in Permanent Magnet Machines written by Kai Wang and published by Springer. This book was released on 2018-08-29 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the utilization of harmonics in the permanent magnet (PM) or rotor shape to improve the torque density of PM brushless AC machines including three-phase inner rotor and outer rotor machines, five-phase machines, dual three-phase machines, linear machines, by means of analytical, finite element analyses, and as well as experimental validation. The torque density can be improved while the torque ripple remains low in PM shaping utilizing the 3rd harmonic. In this book, the analytical expression of output torque is derived for PM machines with rotor shape using the 3rd harmonic, and then the optimal 3rd harmonic for maximizing torque is analytically obtained. The book compares the PM shape in surface-mounted PM (SPM) machines and the rotor lamination shape in interior PM (IPM) machines utilizing the 3rd harmonic, and it becomes clear that their shaping methods and amount of torque improvement are different. In a five-phase PM machine, the 3rd harmonic can be utilized in both the current waveform and PM shapes to further improve the output torque. For the dual three-phase SPM machines without deteriorating the torque more than 30% when the optimal 3rd harmonic into both the current and PM shape are injected. The harmonics in airgap flux density have significant influence on the cogging torque, stator iron flux distribution, and radial force between the rotor and stator. These effects has been investigated as well in this book.
Download or read book Variable Speed Generators written by Ion Boldea and published by CRC Press. This book was released on 2015-09-03 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable Speed Generators, the second of two volumes in the Electric Generators Handbook, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. The book delves into the steady state, transients, control, and design of claw-pole-rotor synchronous, induction, permanent-magnet-(PM)-assisted synchronous, and switched reluctance starter alternators for electric hybrid vehicles. It discusses PM synchronous, transverse flux PM, and flux reversal PM generators for low-speed wind and hydro energy conversion. It also explores linear motion alternators for residential and spacecraft applications. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Address the ride-through control of doubly fed induction generators under unbalanced voltage sags Consider the control of stand-alone doubly fed induction generators under unbalanced nonlinear loads Detail a stand-alone squirrel cage induction generator (SCIG) with AC output and a low-rating pulse-width modulated (PWM) converter Present a twin stator winding SCIG with 50 percent rating inverter and diode rectifier, and a dual stator winding induction generator with nested cage rotor Examine interior permanent magnet claw-pole-alternator systems for more vehicle braking energy recuperation, and high power factor Vernier PM generators Depict a PM-assisted reluctance synchronous motor/generator for an electric hybrid vehicle, and a double stator switched reluctance generator with segmented rotor Describe the grid to stand-alone transition motion-sensorless dual-inverter control of permanent magnet synchronous generators with asymmetrical grid voltage sags and harmonics filtering The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Variable Speed Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.
Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.
Download or read book The Electric Generators Handbook 2 Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2005-11-16 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern world hungers for electricity. Traditionally, this hunger was sated with predominantly constant-speed-regulated, synchronous generators. However, new demands require the stable, quick, and efficient delivery and control offered by variable-speed generators. Surveying all of the technologies used to satisfy the world's demand for o
Download or read book Electric Generators Handbook Two Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2018-10-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.
Download or read book Utilization of Third Harmonic Voltages in DC Power Generation written by Alfredo Muñoz García and published by . This book was released on 1995 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensorless Control of Permanent Magnet Synchronous Machine Drives written by Zi Qiang Zhu and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource providing basic principles and state-of-the art developments in sensorless control technologies for permanent magnet synchronous machine drives Sensorless Control of Permanent Magnet Synchronous Machine Drives highlights the global research achievements over the last three decades and the sensorless techniques developed by the authors and their colleagues, and covers sensorless control techniques of permanent magnet machines, discussing issues and solutions. Many worked application examples are included to aid in practical understanding of concepts. Written by two pioneering authors in the field, Sensorless Control of Permanent Magnet Synchronous Machine Drives covers sample topics such as: Permanent magnet brushless AC and DC drives Single three-phase, dual three-phase, and open winding machines Modern control theory based sensorless methods, covering model reference adaptive system, sliding mode observer, extended Kalman filter, and model predictive control Flux-linkage and back-EMF based methods for non-salient machines, and active flux-linkage and extended back-EMF methods for salient machines Pulsating and rotating high frequency sinusoidal and square wave signal injection methods with current or voltage response, at different reference frames, and selection of amplitude and frequency for injection signal Sensorless control techniques based on detecting third harmonic or zero-crossings of back-EMF waveforms Parasitic effects in fundamental and high frequency models, impacts on position estimation, and compensation schemes, covering cross-coupling magnetic saturation, load effect, machine saliency and multiple saliencies, inverter non-linearities, voltage and current harmonics, parameter asymmetries, and parameter mismatches Techniques for rotor initial position estimation, magnetic polarity detection, and transition between low and high speeds Describing basic principles, examples, challenges, and practical solutions, Sensorless Control of Permanent Magnet Synchronous Machine Drives is a highly comprehensive resource on the subject for professionals working on electrical machines and drives, particularly permanent magnet machines, and researchers working on electric vehicles, wind power generators, household appliances, and industrial automation.
Download or read book Electromagnetic Fields in Electrical Engineering written by Andrzej Krawczyk and published by IOS Press. This book was released on 2002 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes contributions on: field theory and advanced computational electromagnetics; electrical machines and transformers; optimization and interactive design; electromagnetics in materials; coupled field and electromagnetic components in mechatronics; induction heating systems; bioelectromagnetics; and electromagnetics in education.
Download or read book Control Strategies of Permanent Magnet Synchronous Motor Drive for Electric Vehicles written by Chiranjit Sain and published by CRC Press. This book was released on 2022-09-19 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: To reduce the emissions of greenhouse gasses and maintain environmental sustainability, electric vehicles play a vital role in a modern energy-efficient environment. Permanent magnet synchronous motors (PMSMs) are widely employed in electric vehicle technology due to their high dynamic response, better torque-speed characteristics, noiseless operation, high power density, high efficiency and power factor as compared to other conventional motor drives. This book demonstrates the development of various control strategies and illustrates the dynamic performance intensification of a PMSM drive. To ensure the faster dynamic behaviour and flexibility in control under various operating conditions, the performance of a PMSM drive has been explained. Finally, control strategies have been executed through mathematical modelling and illustration of several case studies for optimal operation. Features: Introduces performance indicators in a self-controlled PMSM machine to justify the dynamic behaviour Discusses comparative performance study and optimization of the drive performance Provides a detailed comparative performance analysis between classical and fuzzy logic controllers in a PMSM drive Includes illustrations and case studies using mathematical modelling and real-time test results Discusses the state of the art in solar-powered energy-efficient PMSM drives with various issues This book is aimed at researchers, graduate students and libraries in electrical engineering with specialization in electric vehicles.
Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.
Download or read book The proceedings of the 16th Annual Conference of China Electrotechnical Society written by Qingxin Yang and published by Springer Nature. This book was released on 2022-04-17 with total page 1465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the 16th Annual Conference of China Electrotechnical Society, organized by China Electrotechnical Society (CES), held in Beijing, China, from September 24 to 26, 2021. It covers topics such as electrical technology, power systems, electromagnetic emission technology, and electrical equipment. It introduces the innovative solutions that combine ideas from multiple disciplines. The book is very much helpful and useful for the researchers, engineers, practitioners, research students, and interested readers.
Download or read book Optimization and Inverse Problems in Electromagnetism written by Marek Rudnicki and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: From 12 to 14 September 2002, the Academy of Humanities and Economics (AHE) hosted the workshop "Optimization and Inverse Problems in Electromagnetism". After this bi-annual event, a large number of papers were assembled and combined in this book. During the workshop recent developments and applications in optimization and inverse methodologies for electromagnetic fields were discussed. The contributions selected for the present volume cover a wide spectrum of inverse and optimal electromagnetic methodologies, ranging from theoretical to practical applications. A number of new optimal and inverse methodologies were proposed. There are contributions related to dedicated software. Optimization and Inverse Problems in Electromagnetism consists of three thematic chapters, covering: -General papers (survey of specific aspects of optimization and inverse problems in electromagnetism), -Methodologies, -Industrial Applications. The book can be useful to students of electrical and electronics engineering, computer science, applied mathematics (PhD level) and to researchers interested in the topic.
Download or read book Concerted European Action on Magnets CEAM written by I.V. Mitchell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: The beneficial impact of the European communities involvement in scientific research and technology is wide-ranging and pervasive. There are high hopes of major advances in scientific knowledge and technological processes, while the emergence of a genuine tradition of collaborative research holds out great and continuing promise for the future. Close, frequent and long-term cooperation between universities, research centres and industry is already generating new synergies, forging a truly European scientific community. Many of tomorrows industrial developments, destined to be determinant for our economic success and prosperity, will spring from this research. The Concerted European Action on Magnets - CEAM - project is a prime example of collaborative research and development. Financed from the Communities STIMULATION action and implemented with the help of EURAM, the advanced materials programme, CEAM will bestow great benefits on European industrial competitiveness, providing a channel for high quality basic research to find its way into commercial products. This remarkable cooperative enterprise brought t~gether 58 laboratories and more than 120 scientists and englneers in a sustained thirty month effort. It spanned every aspect of new iron-based high performance magnets from theoretical modelling of their intrinsic magnetic properties to the design and construction of novel electrical devices and machines. Besides adding a new European dimension to advanced magnetic technology, CEAM also ensured that a whole new generation of young researchers and technicians have been trained in applied magnetism.
Download or read book Permanent Magnet Motor Technology written by Jacek F. Gieras and published by CRC Press. This book was released on 2009-08-25 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of permanent magnet (PM) motor technology and its impact on electromechanical drives has grown exponentially since the publication of the bestselling second edition. The PM brushless motor market has grown considerably faster than the overall motion control market. This rapid growth makes it essential for electrical and electromechanical engineers and students to stay up-to-date on developments in modern electrical motors and drives, including their control, simulation, and CAD. Reflecting innovations in the development of PM motors for electromechanical drives, Permanent Magnet Motor Technology: Design and Applications, Third Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This edition supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors, including the finite element approach, and explains how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter facilitate a lucid understanding of motor operations and characteristics. This 3rd edition of a bestselling reference has been thoroughly revised to include: Chapters on high speed motors and micromotors Advances in permanent magnet motor technology Additional numerical examples and illustrations An increased effort to bridge the gap between theory and industrial applications Modified research results The growing global trend toward energy conservation makes it quite possible that the era of the PM brushless motor drive is just around the corner. This reference book will give engineers, researchers, and graduate-level students the comprehensive understanding required to develop the breakthroughs that will push this exciting technology to the forefront.
Download or read book Propulsion Systems for Hybrid Vehicles written by John M. Miller and published by IET. This book was released on 2008 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering in-depth coverage of hybrid propulsion topics, energy storage systems and modelling, and supporting electrical systems, this book will be an invaluable resource for practising engineers and managers involved in all aspects of hybrid vehicle development, modelling, simulation and testing.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1994 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Permanent Magnet Electric Machines written by Jacek F. Gieras and published by CRC Press. This book was released on 2022-12-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The late 1980s saw the beginning of the PM brushless machine era, with the invention of high-energy density permanent magnets (PM) and the development of power electronics. Although induction motors are now the most popular electric motors, the impact of PM brushless machines on electromechanical drives is significant. Today, PM machines come second to induction machines. Replacement of electromagnetic field excitation systems by PMs brings the following benefits: No electrical energy is absorbed by the field excitation system and thus there are no excitation losses, causing substantial increase in efficiency Higher power density (kW/kg) and/or torque density (Nm/kg) than electromagnetic excitation Better dynamic performance than motors with electromagnetic excitation (higher magnetic flux density in the air gap) Simplification of construction and maintenance Less expensive for some types of machines Modern Permanent Magnet Electric Machines: Theory and Control serves as a textbook for undergraduate power engineering students who want to supplement and expand their knowledge in the fundamentals of magnetism, soft magnetic materials, permanent magnets (PMs), calculation of magnetic circuits with PMs, modern PM brushed DC machines and their controls, modern PM brushless DC motors and drive control, and modern PM generators. The book can help students learn more about electrical machines and can serve as a prescribed text for teaching elective undergraduate courses such as modern permanent magnet electrical machines. Since the book is written in a simple scientific language and without redundant mathematics, it can also be used by practicing engineers and managers employed in electrical machinery or electromagnetic device industries.
