Download or read book Thermomechanical Study of the Gigacycle Fatigue Behavior of Pure Iron and Carbon manganese Steels written by Xiaoxue Pu and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work attempts to a better understanding of the fatigue damage in ferrite-pearlite steels in the Very High Cycle Fatigue (VHCF) domain. The influences of two parameters, pearlite phase percentage and free interstitial atoms percentage in solid solution, are investigated to understand dissipative mechanisms under 20 kHz high frequency fatigue loading. In-situ infrared thermography is carried out to record the temperature changes, while fractography studies and microscope observations are conducted to investigate the dissipative mechanism on the surface of specimens.For body centered cubic (BCC) materials, under high stress amplitudes, a sudden increase of the temperature occurs without a crack initiation and fracture. The inevitable temperature increase up to hundreds of degrees at high stress amplitudes, is caused mainly by the screw dislocations mobility, which is the key to explaining the observed fatigue behavior and thermal response of BCC structure under high frequency loading. Therefore, PSBs on surface and micro-voids in matrix emerge massively, accompanying with this abrupt temperature increase. These phenomena are considered as transition of deformation mechanism from thermal regime to athermal regime. At low amplitudes, few PSBs or surface roughness are still observed on the specimen surface. Through the cycles of PSB appearance on armco-iron, it's found that PSBs are inclined to appear before 1x10(7)cycles, and PSB threshold lies below the conventional fatigue limit. The increase of pearlite phase content weakens the temperature elevation, and strengthens the fatigue properties. The presence of free interstitial atoms in steels results in appearence of a secondary temperature increase in the stabilized temperature part (100-200 degree). This behavior seems to be related to the interaction of edge dislocations with free interstitial atoms. Moreover, the remarkable hardening-softening-hardening phenomenon after the sudden temperature elevation to above 300 degree is thought as the interaction of multiplicated screw dislocations and free interstitial atoms.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Copper Alloys written by Luca Collini and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper has been used for thousands of years. In the centuries, both handicraft and industry have taken advantage of its easy castability and remarkable ductility combined with good mechanical and corrosion resistance. Although its mechanical properties are now well known, the simple f.c.c. structure still makes copper a model material for basic studies of deformation and damage mechanism in metals. On the other hand, its increasing use in many industrial sectors stimulates the development of high-performance and high-efficiency copper-based alloys. After an introduction to classification and casting, this book presents modern techniques and trends in processing copper alloys, such as the developing of lead-free alloys and the role of severe plastic deformation in improving its tensile and fatigue strength. Finally, in a specific section, archaeometallurgy techniques are applied to ancient copper alloys. The book is addressed to engineering professionals, manufacturers and materials scientists.
Download or read book Mechanical Fatigue of Metals written by José A.F.O. Correia and published by Springer. This book was released on 2019-05-07 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the XIX International Colloquium on Mechanical Fatigue of Metals, held at the Faculty of Engineering of the University of Porto, Portugal, 5-7 September 2018. This International Colloquium facilitated and encouraged the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of the fatigue of metals, looking at the problem of fatigue exploring analytical and numerical simulative approaches. Fatigue damage represents one of the most important types of damage to which structural materials are subjected in normal industrial services that can finally result in a sudden and unexpected abrupt fracture. Since metal alloys are still today the most used materials in designing the majority of components and structures able to carry the highest service loads, the study of the different aspects of metals fatigue attracts permanent attention of scientists, engineers and designers.
Download or read book Bainite in Steels written by H.K.D.H. Bhadeshia and published by CRC Press. This book was released on 2019-04-15 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book, much expanded to include and incorporate important developments in the subject over the last fifteen years. The book represents a comprehensive treatise on all aspects of the bainite transformation, from the choreography of atoms during the phase change to length scales that are typical of engineering applications. The alloy design that emerges from this explains the role of solute additions, and the pernicious effects of impurities such as hydrogen. The picture presented is self-consistent and therefore is able to guide the reader on the exploitation of theory to the design of some of the most exciting steels, including the world’s first bulk nanostructured metal.
Download or read book Welding Engineering written by David H. Phillips and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles
Download or read book Superplasticity in Advanced Materials ICSAM 2018 written by Goroh Itoh and published by Trans Tech Publications Ltd. This book was released on 2018-07-20 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes selected and peer reviewed papers presented at the 13th International Conference on Superplasticity in Advanced Materials (ICSAM 2018), August 19-22, 2018, St. Petersburg, Russia. We hope this collection will be interesting and useful for many specialists whose scientific and engineering activity is related to the area of superplastic materials, research of the mechanisms of superplasticity and superplastic processing technologies.
Download or read book Characterization of Minerals Metals and Materials 2015 written by John Carpenter and published by Springer. This book was released on 2016-12-20 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Papers cover topics such as clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic materials, magnetic materials, environmental materials, advanced materials, and soft materials. In addition, papers covering materials extraction, materials processing, corrosion, welding, solidification, and method development are included. This book provides a current snapshot of characterization in materials science and its role in validating, informing, and driving current theories in the field of materials science. This volume will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Download or read book Alloy Steel written by Eduardo Valencia Morales and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sections in this book are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in microalloyed steels. The kinetics during tempering in low-alloy steels is also discussed through a new set-up that uses a modified Avrami formalism.
Download or read book Bearing Steel Technology written by John M. Beswick and published by ASTM International. This book was released on 2007 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Irradiated Stainless Steels written by Richard E. Schreiber and published by . This book was released on 1961 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essentials of Materials Science and Engineering written by Donald R. Askeland and published by Cengage Learning. This book was released on 2018-02-08 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover why materials behave as the way they do with ESSENTIALS OF MATERIALS SCIENCE AND ENGINEERING, 4TH Edition. Materials engineering explains how to process materials to suit specific engineering designs. Rather than simply memorizing facts or lumping materials into broad categories, you gain an understanding of the whys and hows behind materials science and engineering. This knowledge of materials science provides an important a framework for comprehending the principles used to engineer materials. Detailed solutions and meaningful examples assist in learning principles while numerous end-of-chapter problems offer significant practice. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Metallurgical Modelling of Welding written by Øystein Grong and published by CRC Press. This book was released on 1997 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Modelling of Welding gives graduate students, engineers and researchers an in-depth insight into the field of welding metallurgy, providing a broad overview of its fundamental principles. In recent years, significant progress has been made in the understanding of the chemical and physical processes which take place during weldning. This book brings together all the basic components to reach the goal of faster process development, optimisation of processes and properties, and the possibility of developing new and weldable alloys.The second edition includes a new chapter of exercis.
Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.
Download or read book Cold Gas Dynamic Spray written by Roman Gr. Maev and published by CRC Press. This book was released on 2016-04-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Guide to Advanced Cold Spray TechnologyCold Gas Dynamic Spray centers on cold gas dynamic spray (or cold spray-CS) technology, one of the most versatile thermal spray coating methods in materials engineering, and effectively describes and analyzes the main trends and developments behind the spray (coating) techniques. The book combines theory
Download or read book Shape Memory Alloys for Biomedical Applications written by T Yoneyama and published by Elsevier. This book was released on 2008-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys are suitable for a wide range of biomedical applications, such as dentistry, bone repair and cardiovascular stents. Shape memory alloys for biomedical applications provides a comprehensive review of the use of shape memory alloys in these and other areas of medicine.Part one discusses fundamental issues with chapters on such topics as mechanical properties, fabrication of materials, the shape memory effect, superelasticity, surface modification and biocompatibility. Part two covers applications of shape memory alloys in areas such as stents and orthodontic devices as well as other applications in the medical and dental fields.With its distinguished editors and international team of contributors, Shape memory alloys for biomedical applications is an essential reference for materials scientists and engineers working in the medical devices industry and in academia. - A comprehensive review of shape memory metals and devices for medical applications - Discusses materials, mechanical properties, surface modification and biocompatibility - Chapters review medical and dental devices using shape memory metals, including stents and orthodontic devices
Download or read book Reactor Core Materials written by and published by . This book was released on 1960 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
