Download or read book Thermal hydraulic Code Selection for Modular High Temperature Gas cooled Reactors written by E. M. J. Komen and published by . This book was released on 1995 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Hydraulic Analysis of a Reduced Scale High Temperature Gas Cooled Reactor Test Facility and Its Prototype with MELCOR written by Bradley Aaron Beeny and published by . This book was released on 2013 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pursuant to the energy policy act of 2005, the High Temperature Gas-Cooled Reactor (HTGR) has been selected as the Very High Temperature Reactor (VHTR) that will become the Next Generation Nuclear Plant (NGNP). Although plans to build a demonstration plant at Idaho National Laboratories (INL) are currently on hold, a cooperative agreement on HTGR research between the U.S. Nuclear Regulatory Commission (NRC) and several academic investigators remains in place. One component of this agreement relates to validation of systems-level computer code modeling capabilities in anticipation of the eventual need to perform HTGR licensing analyses. Because the NRC has used MELCOR for LWR licensing in the past and because MELCOR was recently updated to include gas-cooled reactor physics models, MELCOR is among the system codes of interest in the cooperative agreement. The impetus for this thesis was a code-to-experiment validation study wherein MELCOR computer code predictions were to be benchmarked against experimental data from a reduced-scale HTGR testing apparatus called the High Temperature Test Facility (HTTF). For various reasons, HTTF data is not yet available from facility designers at Oregon State University, and hence the scope of this thesis was narrowed to include only computational studies of the HTTF and its prototype, General Atomics' Modular High Temperature Gas-Cooled Reactor (MHTGR). Using the most complete literature references available for MHTGR design and using preliminary design information on the HTTF, MELCOR input decks for both systems were developed. Normal and off-normal system operating conditions were modeled via implementation of appropriate boundary and inititial conditions. MELCOR Predictions of system response for steady-state, pressurized conduction cool-down (PCC), and depressurized conduction cool-down (DCC) conditions were checked against nominal design parameters, physical intuition, and some computational results available from previous RELAP5-3D analyses at INL. All MELCOR input decks were successfully built and all scenarios were successfully modeled under certain assumptions. Given that the HTTF input deck is preliminary and was based on dated references, the results were altogether imperfect but encouraging since no indications of as yet unknown deficiencies in MELCOR modeling capability were observed. Researchers at TAMU are in a good position to revise the MELCOR models upon receipt of new information and to move forward with MELCOR-to-HTTF benchmarking when and if test data becomes available. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/148182
Download or read book Advances in High Temperature Gas Cooled Reactor Fuel Technology written by International Atomic Energy Agency and published by . This book was released on 2012-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modular High temperature Gas cooled Reactor Power Plant written by Kurt Kugeler and published by Springer. This book was released on 2018-10-05 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Modular High-temperature Gas-cooled Reactor Power Plant" introduces the power plants driven by modular high temperature gas-cooled reactors (HTR), which are characterized by their inherent safety features and high output temperatures. HTRs have the potential to be adopted near demand side to supply both electricity and process heat, directly replacing conventional fossil fuels. The world is confronted with two dilemmas in the energy sector, namely climate change and energy supply security. HTRs have the potential to significantly alleviate these concerns. This book will provide readers with a thorough understanding of HTRs, their history, principles, and fields of application. The book is intended for researchers and engineers involved with nuclear engineering and energy technology.
Download or read book Physics of High Temperature Reactors written by Luigi Massimo and published by Elsevier. This book was released on 2013-10-22 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of High-Temperature Reactors focuses on the physics of high-temperature reactors (HTRs) and covers topics ranging from fuel cycles and refueling strategies to neutron cross-sections, transport and diffusion theory, and resonance absorption. Spectrum calculations and cross-section averaging are also discussed, along with the temperature coefficient and reactor control. Comprised of 16 chapters, this book begins with a general description of the HTR core as well as its performance limitations. The next chapter deals with general considerations about HTR physics, including quantities to be determined and optimized in the design of nuclear reactors. Potential scattering and resonance reactions between neutrons and atomic nuclei are then considered, together with basic aspects of transport and diffusion theory. Subsequent chapters explore methods for solving the diffusion equation; slowing-down and neutron thermalization in graphite; HTR core design, fuel management, and cost calculations; and core dynamics and accident analysis. The final chapter describes the sequence of reactor design calculations. This monograph is written primarily for students of HTR physics who are preparing to enter the field as well as technologists of other disciplines who are working on the system.
Download or read book Benchmark Experiments Development and Needs in Support of Advanced Reactor Design written by Mark David DeHart and published by Frontiers Media SA. This book was released on 2023-08-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of a Computer Code for Thermal Hydraulics of Reactors THOR Second Quarterly Progress Report January March 31 1975 written by and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the advanced code development work is to construct a computer code for the prediction of thermohydraulic transients in water-cooled nuclear reactor systems. The fundamental formulation of fluid dynamics is to be based on the one-dimensional drift flux model for non-homogeneous, non- equilibrium flows of two-phase mixtures. Particular emphasis is placed on component modeling, automatic prediction of initial steady state conditions, inclusion of one-dimensional transient neutron kinetics, freedom in the selection of computed spatial detail, development of reliable constitutive descriptions, and modular code structure. (auth).
Download or read book Multiphase Flow and Heat Transfer in Pebble Bed Reactor Core written by Shengyao Jiang and published by Springer Nature. This book was released on 2020-11-19 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to gas flows and heat transfer in pebble bed reactor cores. It addresses fundamental issues regarding experimental and modeling methods for complex multiphase systems, as well as relevant applications and recent research advances. The numerical methods and experimental measurements/techniques used to solve pebble flows, as well as the content on radiation modeling for high-temperature pebble beds, will be of particular interest. This book is intended for a broad readership, including researchers and practitioners, and is sure to become a key reference resource for students and professionals alike.
Download or read book Thermal and Flow Design of Helium cooled Reactors written by Gilbert Melese and published by . This book was released on 1984 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This source book provides both an overview of gas-cooled reactors and a detailed look at the high-temperature gas-cooled reactor (HTGR). Taking a worldwide perspective, this book reviews the early development of the HTGR and explores potential future development and applications.
Download or read book Scaling Analysis of the OSU High Temperature Test Facility During a Pressurized Conduction Cooldown Event Using RELAP5 3D written by Juan A. Castañeda and published by . This book was released on 2014 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: In early 2000, the Generation IV International Forum (GIF) was created to perform research and development for the next generation nuclear systems. Among the selected nuclear systems was the Very High Temperature Gas-Cooled Reactor (VHTR). Then in 2008, the U.S. Department of Energy (DOE) decided that the Next Generation Nuclear Plant (NGNP) would be the VHTR. The VHTR was chosen because it has the capability to produce electricity, hydrogen and may be used for other high-temperature process heat applications. In support of licensing and validation of the VHTR, Oregon State University was tasked to develop a high temperature apparatus that will be able to capture the thermal fluids phenomena of the VHTR and perform integral effects tests for validation of existing safety codes. The design has been called the High Temperature Test Facility (HTTF), which is a scaled design of the Modular High Temperature Gas-Cooled Reactor (MHTGR). The objective of this study was to investigate the ability of the HTTF to simulate the Pressurized Conduction Cooldown (PCC) Event during the natural circulation phase in the MHTGR. This was achieved with the aid of a thermal hydraulic systems code, RELAP5-3D.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Advanced Modeling and Simulation of Nuclear Reactors written by Jingang Liang and published by Frontiers Media SA. This book was released on 2023-04-10 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 1988-06-13 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical and Experimental Studies on Small Micro Nuclear Reactors written by Yugao Ma and published by Frontiers Media SA. This book was released on 2024-04-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future space missions and deep-sea explorations will require small/micro nuclear reactors (kWe~MWe) for power generation. Compared with conventional energy systems such as storage batteries and fossil energy, nuclear reactors are featured higher energy intensity, higher reliability, and longer lifetime. According to the coolant, the candidate small/micro nuclear reactors include the heat pipe cooled reactor, liquid metal cooled reactor, and gas-cooled reactor, most of which are still in the conceptual design stage with numerical studies and experimental research. These emerging reactors have an entirely different core structure and working principle from the existing light water reactors, which has led to an increasing need for updated simulation methods and experimental studies.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
