Download or read book Theory of Beams written by T. Iwiński and published by Elsevier. This book was released on 2014-06-28 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Beams: The Application of the Laplace Transformation Method to Engineering Problems, Second Enlarged Edition emphasizes the method used than the broad coverage of all the significant cases that may be met in engineering practice. The content of this edition is mostly the topics presented in the first edition, but are roughly doubled. This edition is divided into four chapters, wherein most of the modifications made are included in the fourth chapter. The first chapter provides an introduction of the study, followed by discussions on theory of beams. Then, specific topics on the transform of the load function; beams with transverse and axial loading; beams and free beam on elastic foundations and non-homogeneous elastic foundations; and simple beam with terminal forces and couples resting on an elastic foundation are examined. This book ends with a table presenting transforms and functions. This text will be of interest to mathematicians and engineers, as well as mathematics and engineering students.
Download or read book Structural Analysis written by O. A. Bauchau and published by Springer Science & Business Media. This book was released on 2009-08-03 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors and their colleagues developed this text over many years, teaching undergraduate and graduate courses in structural analysis courses at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology. The emphasis is on clarity and unity in the presentation of basic structural analysis concepts and methods. The equations of linear elasticity and basic constitutive behaviour of isotropic and composite materials are reviewed. The text focuses on the analysis of practical structural components including bars, beams and plates. Particular attention is devoted to the analysis of thin-walled beams under bending shearing and torsion. Advanced topics such as warping, non-uniform torsion, shear deformations, thermal effect and plastic deformations are addressed. A unified treatment of work and energy principles is provided that naturally leads to an examination of approximate analysis methods including an introduction to matrix and finite element methods. This teaching tool based on practical situations and thorough methodology should prove valuable to both lecturers and students of structural analysis in engineering worldwide. This is a textbook for teaching structural analysis of aerospace structures. It can be used for 3rd and 4th year students in aerospace engineering, as well as for 1st and 2nd year graduate students in aerospace and mechanical engineering.
Download or read book Theory and Design of Charged Particle Beams written by Martin Reiser and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although particle accelerators are the book's main thrust, it offers a broad synoptic description of beams which applies to a wide range of other devices such as low-energy focusing and transport systems and high-power microwave sources. Develops material from first principles, basic equations and theorems in a systematic way. Assumptions and approximations are clearly indicated. Discusses underlying physics and validity of theoretical relationships, design formulas and scaling laws. Features a significant amount of recent work including image effects and the Boltzmann line charge density profiles in bunched beams.
Download or read book Nonlinear Composite Beam Theory written by Dewey H. Hodges and published by Progress in Astronautics and A. This book was released on 2006 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: From an authoritative expert whose work on modern helicopter rotor blade analysis has spanned over three decades, comes the first consistent and rigorous presentation of beam theory. Beginning with an overview of the theory developed over the last 60 years, Dr. Hodges addresses the kinematics of beam deformation, provides a simple way to characterize strain in an initially curved and twisted beam, and offers cross-sectional analysis for beams with arbitrary cross sections and composed of arbitrary materials. He goes on to present a way to accurately recover all components of cross-sectional strain and stress before providing a natural one-dimensional (1-D) theory of beams. Sample results for both cross-sectional and 1-D analysis are presented as is a parallel treatment for thin-walled beams.
Download or read book Nonlocal Euler Bernoulli Beam Theories written by Jingkai Chen and published by Springer Nature. This book was released on 2021-02-27 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comparative study on the static responses of the Euler-Bernoulli beam governed by nonlocal theories, including the Eringen’s stress-gradient beam theory, the Mindlin’s strain-gradient beam theory, the higher-order beam theory and the peridynamic beam theory. Benchmark examples are solved analytically and numerically using these nonlocal beam equations, including the simply-supported beam, the clamped-clamped beam and the cantilever beam. Results show that beam deformations governed by different nonlocal theories at different boundary conditions show complex behaviors. Specifically, the Eringen’s stress-gradient beam equation and the peridynamic beam equation yield a much softer beam deformation for simply-supported beam and clamped-clamped beam, while the beam governed by the Mindlin’s strain-gradient beam equation is much stiffer. The cantilever beam exhibits a completely different behavior. The higher-order beam equation can be stiffer or softer depending on the values of the two nonlocal parameters. Moreover, the deformation fluctuation of the truncated order peridynamic beam equation is observed and explained from the singularity aspect of the solution expression. This research casts light on the fundamental explanation of nonlocal beam theories in nano-electromechanical systems.
Download or read book Beam Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam theories are exploited worldwide to analyze civil, mechanical, automotive, and aerospace structures. Many beam approaches have been proposed during the last centuries by eminent scientists such as Euler, Bernoulli, Navier, Timoshenko, Vlasov, etc. Most of these models are problem dependent: they provide reliable results for a given problem, for instance a given section and cannot be applied to a different one. Beam Structures: Classical and Advanced Theories proposes a new original unified approach to beam theory that includes practically all classical and advanced models for beams and which has become established and recognised globally as the most important contribution to the field in the last quarter of a century. The Carrera Unified Formulation (CUF) has hierarchical properties, that is, the error can be reduced by increasing the number of the unknown variables. This formulation is extremely suitable for computer implementations and can deal with most typical engineering challenges. It overcomes the problem of classical formulae that require different formulas for tension, bending, shear and torsion; it can be applied to any beam geometries and loading conditions, reaching a high level of accuracy with low computational cost, and can tackle problems that in most cases are solved by employing plate/shell and 3D formulations. Key features: compares classical and modern approaches to beam theory, including classical well-known results related to Euler-Bernoulli and Timoshenko beam theories pays particular attention to typical applications related to bridge structures, aircraft wings, helicopters and propeller blades provides a number of numerical examples including typical Aerospace and Civil Engineering problems proposes many benchmark assessments to help the reader implement the CUF if they wish to do so accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given in the book as well as to solve other problems of their own www.mul2.com Researchers of continuum mechanics of solids and structures and structural analysts in industry will find this book extremely insightful. It will also be of great interest to graduate and postgraduate students of mechanical, civil and aerospace engineering.
Download or read book Shear Deformable Beams and Plates written by C.M. Wang and published by Elsevier. This book was released on 2000-07-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on the theory and analysis of beams and plates deal with the classical (Euler-Bernoulli/Kirchoff) theories but few include shear deformation theories in detail. The classical beam/plate theory is not adequate in providing accurate bending, buckling, and vibration results when the thickness-to-length ratio of the beam/plate is relatively large. This is because the effect of transverse shear strains, neglected in the classical theory, becomes significant in deep beams and thick plates. This book illustrates how shear deformation theories provide accurate solutions compared to the classical theory. Equations governing shear deformation theories are typically more complicated than those of the classical theory. Hence it is desirable to have exact relationships between solutions of the classical theory and shear deformation theories so that whenever classical theory solutions are available, the corresponding solutions of shear deformation theories can be readily obtained. Such relationships not only furnish benchmark solutions of shear deformation theories but also provide insight into the significance of shear deformation on the response. The relationships for beams and plates have been developed by many authors over the last several years. The goal of this monograph is to bring together these relationships for beams and plates in a single volume. The book is divided into two parts. Following the introduction, Part 1 consists of Chapters 2 to 5 dealing with beams, and Part 2 consists of Chapters 6 to 13 covering plates. Problems are included at the end of each chapter to use, extend, and develop new relationships.
Download or read book Timoshenko Beam Theory written by Aamer Haque and published by . This book was released on 2019-03-12 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems arise with Euler-Bernoulli beam theory when shear deformations are present. This frequently occurs in the case of deep beams. Timoshenko beam theory includes shear deformations as part of its formulation.This short text provides a clear explanation of Timoshenko beam theory. It contains a derivation based on elementary statics and mechanics. Other topics include: solution using Green's functions, virtual work and energy principles, and finite elements.Structural engineers will find this book helpful in understanding the important principles and use of Timoshenko beam thoery.
Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.
Download or read book Analysis and Design of Elastic Beams written by Walter D. Pilkey and published by John Wiley & Sons. This book was released on 2002-11-20 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art coverage of modern computational methods for the analysis and design of beams Analysis and Design of Elastic Beams presents computer models and applications related to thin-walled beams such as those used in mechanical and aerospace designs, where thin, lightweight structures with high strength are needed. This book will enable readers to compute the cross-sectional properties of individual beams with arbitrary cross-sectional shapes, to apply a general-purpose computer analysis of a complete structure to determine the forces and moments in the individual members, and to use a unified approach for calculating the normal and shear stresses, as well as deflections, for those members' cross sections. In addition, this book augments a solid foundation in the basic structural design theory of beams by: * Providing coverage of thin-wall structure analysis and optimization techniques * Applying computer numerical methods to classical design methods * Developing computational solutions for cross-sectional properties and stresses using finite element analyses Including access to an associated Web site with software for the analysis and design of any cross-sectional shape, Analysis and Design of Elastic Beams: Computational Methods is an essential reference for mechanical, aerospace, and civil engineers and designers working in the automotive, ship, and aerospace industries in product and process design, machine design, structural design, and design optimization, as well as students and researchers in these areas.
Download or read book Random Light Beams written by Olga Korotkova and published by CRC Press. This book was released on 2017-12-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Random Light Beams: Theory and Applications contemplates the potential in harnessing random light. This book discusses light matter interactions, and concentrates on the various phenomena associated with beam-like fields. It explores natural and man-made light fields and gives an overview of recently introduced families of random light beams. It outlines mathematical tools for analysis, suggests schemes for realization, and discusses possible applications. The book introduces the essential concepts needed for a deeper understanding of the subject, discusses various classes of deterministic paraxial beams and examines random scalar beams. It highlights electromagnetic random beams and matters relating to generation, propagation in free space and various media, and discusses transmission through optical systems. It includes applications that benefit from the use of random beams, as well as the interaction of beams with deterministic optical systems. • Includes detailed mathematical description of different model sources and beams • Explores a wide range of man-made and natural media for beam interaction • Contains more than 100 illustrations on beam behavior • Offers information that is based on the scientific results of the last several years • Points to general methods for dealing with random beams, on the basis of which the readers can do independent research It gives examples of light propagation through the human eye, laser resonators, and negative phase materials. It discusses in detail propagation of random beams in random media, the scattering of random beams from collections of scatterers and thin random layers as well as the possible uses for these beams in imaging, tomography, and smart illumination.
Download or read book Classical Beam Theories of Structural Mechanics written by Andreas Öchsner and published by Springer Nature. This book was released on 2021-06-13 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and thorough overview of the classical bending members based on the theory for thin beams (shear-rigid) according to Euler-Bernoulli, and the theories for thick beams (shear-flexible) according to Timoshenko and Levinson. The understanding of basic, i.e., one-dimensional structural members, is essential in applied mechanics. A systematic and thorough introduction to the theoretical concepts for one-dimensional members keeps the requirements on engineering mathematics quite low, and allows for a simpler transfer to higher-order structural members. The new approach in this textbook is that it treats single-plane bending in the x-y plane as well in the x-z plane equivalently and applies them to the case of unsymmetrical bending. The fundamental understanding of these one-dimensional members allows a simpler understanding of thin and thick plate bending members. Partial differential equations lay the foundation to mathematically describe the mechanical behavior of all classical structural members known in engineering mechanics. Based on the three basic equations of continuum mechanics, i.e., the kinematics relationship, the constitutive law, and the equilibrium equation, these partial differential equations that describe the physical problem can be derived. Nevertheless, the fundamental knowledge from the first years of engineering education, i.e., higher mathematics, physics, materials science, applied mechanics, design, and programming skills, might be required to master this topic.
Download or read book Theories and Analyses of Beams and Axisymmetric Circular Plates written by J N Reddy and published by CRC Press. This book was released on 2022-06-30 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook compiles cutting-edge research on beams and circular plates, covering theories, analytical solutions, and numerical solutions of interest to students, researchers, and engineers working in industry. Detailing both classical and shear deformation theories, the book provides a complete study of beam and plate theories, their analytical (exact) solutions, variational solutions, and numerical solutions using the finite element method. Beams and plates are some of the most common structural elements used in many engineering structures. The book details both classical and advanced (i.e., shear deformation) theories, scaling in complexity to aid the reader in self-study, or to correspond with a taught course. It covers topics including equations of elasticity, equations of motion of the classical and first-order shear deformation theories, and analytical solutions for bending, buckling, and natural vibration. Additionally, it details static as well as transient response based on exact, the Navier, and variational solution approaches for beams and axisymmetric circular plates, and has dedicated chapters on linear and nonlinear finite element analysis of beams and circular plates. Theories and Analyses of Beams and Axisymmetric Circular Plates will be of interest to aerospace, civil, materials, and mechanical engineers, alongside students and researchers in solid and structural mechanics.
Download or read book Plastic Bending Theory And Applications written by T X Yu and published by World Scientific. This book was released on 1996-03-20 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of mechanics, this monograph systematically demonstrates the theory of plastic bending and its engineering applications; most of the contents of the book are based on the authors' research in the past decade. The monograph not only expounds the contributions of the authors to the fundamental theory of plastic bending, but also presents various applications of the theory in sheet metal forming, particularly in the analysis and prediction of springback and wrinkling of strips and plates subjected to bending or stamping. In addition to theoretical modelling, attention has also been paid to the development of related numerical methods; comparisons with experimental results are also presented.
Download or read book Introduction to Focused Ion Beams written by Lucille A. Giannuzzi and published by Springer Science & Business Media. This book was released on 2006-05-18 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Focused Ion Beams is geared towards techniques and applications. This is the only text that discusses and presents the theory directly related to applications and the only one that discusses the vast applications and techniques used in FIBs and dual platform instruments.
Download or read book Guitarmaking Tradition and Technology written by William Cumpiano and published by Chronicle Books. This book was released on 1994-02 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete reference for the design and construction of the steel-string folk guitar and the classical guitar.
Download or read book Fundamentals of Structural Dynamics written by Keith D. Hjelmstad and published by Springer Nature. This book was released on 2022-01-05 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text closes the gap between traditional textbooks on structural dynamics and how structural dynamics is practiced in a world driven by commercial software, where performance-based design is increasingly important. The book emphasizes numerical methods, nonlinear response of structures, and the analysis of continuous systems (e.g., wave propagation). Fundamentals of Structural Dynamics: Theory and Computation builds the theory of structural dynamics from simple single-degree-of-freedom systems through complex nonlinear beams and frames in a consistent theoretical context supported by an extensive set of MATLAB codes that not only illustrate and support the principles, but provide powerful tools for exploration. The book is designed for students learning structural dynamics for the first time but also serves as a reference for professionals throughout their careers.