Download or read book Theoretical Modelling of Spray Drying Processes written by Maksim Mezhericher and published by LAP Lambert Academic Publishing. This book was released on 2011 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a thorough theoretical research of a spray drying process, performed by the author in the framework of his Ph.D. study at Ben-Gurion University of the Negev, Israel, under the supervision of Prof. A. Levy and Prof. I. Borde. The topics covered are: Mathematical and numerical modelling of single droplet drying kinetics for droplets with insoluble and dissolved solids; Analysis of particles breakage during drying processes; Two and three dimensional modelling of drying process in a pilot-plant spray dryer using Computational Fluid Dynamics; Steady and unsteady-state numerical analysis of spray drying process; Comparison between numerical simulations using different turbulence models; Droplet-droplet interactions in spray drying model; Novel probabilistic approach for modelling of particle-particle collisions in spray drying processes.As a comprehensive information source about modelling the spray drying processes, this text will be useful to a broad range of graduate and postgraduate engineering students, process engineers, industrial and academic researchers.
Download or read book Frontiers in Spray Drying written by Nan Fu and published by CRC Press. This book was released on 2020-08-13 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest developments and advances in spray drying and describes how they impact the basic aspect of designing and operating spray dryers. This generic approach allows users to understand how different basic aspects of spray drying have advanced. Users will learn how to apply these advances in their own specific spray drying applications. This book also discusses the handling and control of spray dried products. Includes the latest techniques for use in the design and operation of spray drying operations Covers the basic operations of spray drying that can be applied to different applications of spray drying Discusses the handling and control of spray dried product qualities from a general approach, allowing readers to tailor these approaches to their own specific products This book is aimed at professionals, researchers, and academics working in the fields of food, chemical, pharmaceutical, and industrial engineering.
Download or read book Flame Spray Drying written by Mariia Sobulska and published by CRC Press. This book was released on 2021-09-23 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying processes are among the most energy-consuming operations in industry. Flame spray drying (FSD) is a novel approach to reduce the energy supply needed for the spray drying process. Flame Spray Drying: Equipment, Mechanism, and Perspectives describes FSD technology and current developments in flame techniques and evaluates potential industrial implementation. Details advantages of FSD in terms of energy consumption and reduced drying time Promotes applications of biofuels for the drying process Analyzes the FSD method from CFD modelling to product quality Evaluates potential safety and product degradation risks Provides examples of potential applications of the FSD technique in drying of different materials This book describes an important new technique that is useful to chemical and process engineering researchers, professionals, and students working with drying technologies.
Download or read book Towards a Multiscale Model based Design of Spray Drying Processes written by Moritz Buchholz and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spray Freeze Drying of Foods and Bioproducts written by S. Padma Ishwarya and published by CRC Press. This book was released on 2022-04-19 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray-freeze-drying (SFD) is a synergistic drying technology that imbibes in it the merits of both spray drying and freeze-drying, whilst overcoming the limitations of these predecessor technologies. SFD produces uniquely powdered food and pharmaceutical products with porous microstructure and superior quality attributes. Owing to its atomization step and ultra-low-temperature operation, SFD is a competent drying technique for the production of valuable but sensitive bioactive components. Despite the costs and complexities involved, SFD has a competitive edge over the conventional drying techniques in providing distinctive product attributes. The applications of spray-freeze-drying in the area of food and bioproducts span across the product categories of instant food powders, dry flavors, active pharmaceutical ingredients, poorly water-soluble drugs, probiotics, proteins, enzymes and vaccines. Spray-Freeze-Drying of Foods and Bioproducts: Theory, Applications and Perspectives is the first exclusive title on this interesting drying technique. It provides a comprehensive understanding of the fundamentals of SFD and its food and pharmaceutical applications. The scope of this book, comprising 12 chapters, has been organizedunder four major headings: fundamentals of process-stages, applications with case-studies, recent advancements and the processing bottlenecks and solutions. Key Features Provides examples and case studies of nuances and intricacies associated with each stage of the spray-freeze-drying process Highlights the applications of spray-freeze-drying in the production of food products including soluble coffee, dairy powders, probiotics and flavors Serves as a ready-reckoner of characterization methods for spray-freeze-dried products Contains 200+ illustrations and tabulations The contents of this book are organized to cater to the knowledge needs of students, academicians, researchers and professionals in the food and pharmaceutical industry.
Download or read book Handbook of Industrial Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on 2014-07-11 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Fourth Edition book includes 12 new chapters covering computational fluid dynamic simulation; solar, impingement, and pulse combustion drying; drying of fruits, vegetables, sugar, biomass, and coal; physicochemical aspects of sludge drying; and life-cycle assessment of drying systems. Addressing commonly encountered dryers as well as innovative dryers with future potential, the fully revised text not only delivers a comprehensive treatment of the current state of the art, but also serves as a consultative reference for streamlining industrial drying operations to increase energy efficiency and cost-effectiveness.
Download or read book Computational Fluid Dynamics Simulation of Spray Dryers written by Meng Wai Woo and published by CRC Press. This book was released on 2019-12-14 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap in understanding between the spray drying industry and the numerical modeler on spray drying, Computational Fluid Dynamics Simulation of Spray Dryers: An Engineer's Guide shows how to numerically capture important physical phenomena within a spray drying process using the CFD technique. It includes numerical strategies to effectively describe these phenomena, which are collated from research work and CFD industrial consultation, in particular to the dairy industry. Along with showing how to set up models, the book helps readers identify the capabilities and uncertainties of the CFD technique for spray drying. After briefly covering the basics of CFD, the book discusses airflow modeling, atomization and particle tracking, droplet drying, quality modeling, agglomeration and wall deposition modeling, and simulation validation techniques. The book also answers questions related to common challenges in industrial applications.
Download or read book Spray Dryers written by American Institute of Chemical Engineers (AIChE) and published by John Wiley & Sons. This book was released on 2004-09-14 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray Dryers: A Guide to Performance Evaluation, Second Edition discusses the reasons for spray drying. These reasons are usually to produce a product with certain desired properties or with better efficiency than other methods. The book discusses how to plan in light of these objectives and gives guidance on the variables affecting product properties and dryer performance, to decide which variables to evaluate. Technical spray dryer installations are briefly described. Checklists are given to aid in planning measurements and listing steps needed for a test.
Download or read book Drying Phenomena written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers conventional and novel drying systems and applications, while keeping a focus on the fundamentals of drying phenomena. Presents detailed thermodynamic and heat/mass transfer analyses in a reader-friendly and easy-to-follow approach Includes case studies, illustrative examples and problems Presents experimental and computational approaches Includes comprehensive information identifying the roles of flow and heat transfer mechanisms on the drying phenomena Considers industrial applications, corresponding criterion, complications, prospects, etc. Discusses novel drying technologies, the corresponding research platforms and potential solutions
Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges.* Covers a wide range of subjects and industrial applications* Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes
Download or read book Modern Drying Technology Volume 3 written by Evangelos Tsotsas and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume series provides a comprehensive overview of all important aspects of modern drying technology, concentrating on the transfer of cutting-edge research results to industrial use. Volume 3 discusses how desired properties of foods, biomaterials, active pharmaceutical ingredients, and fragile aerogels can be preserved during drying, and how spray drying and spray fluidized bed processes can be used for particle formation and formulation. Methods for monitoring product quality, such as process analytical technology, and modeling tools, such as Monte Carlo simulations, discrete particle modeling and neural networks, are presented with real examples from industry and academia.
Download or read book Empirical Modeling Simulation and Control of Spray Drying Process Using Nozzle Atomizer Spray Dryer written by Lee Woun Tan and published by . This book was released on 2011 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drying of Porous Materials written by Stefan Jan Kowalski and published by Springer Science & Business Media. This book was released on 2007-04-30 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent advances in research on drying of particulate and porous materials. It is based on a selection of papers presented at the XI Polish Drying Symposium 2005. The contributions cover theoretical, as well as experimental and modeling research on heat and mass transfer processes during drying of porous material and fluidized beds. The book is a pioneering contribution to the science and technology of drying of particulate solids.
Download or read book Spray Drying Handbook written by Keith Masters and published by . This book was released on 1985 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This edition reflects the changes which have occurred in spray drying technology and plant design since the publication of the fourth edition. The author argues that spray drying will remain the most important dehydration technique available to convert pumpable fluid feedstocks into powders. Topics covered include the drying principles, a survey of auxiliary equipment and the applications of spray drying in industry. There is a new chpater on spray drying in environmental control and there is a list of spray drying patents issued within the last five years. This edition also contains more data and tables that cover operation and design information for a wide range of products."--Provided by the publisher.
Download or read book Spray Drying for the Food Industry written by Seid Mahdi Jafari and published by Elsevier. This book was released on 2023-11-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray Drying for the Food Industry, in the Unit Operations and Processing Equipment in the Food Industry series, explains the fundamental and applied research in all aspects of spray drying from engineering to technology. The book thoroughly examines the spray drying of food materials with an emphasis on production, processing, engineering, characterization, and applications of spray dried food powders that enable novel/enhanced properties or functions. Divided into four sections, "Fundamentals of Spray drying process", "Application of spray drying for production of food powders", "Encapsulation of food bioactive ingredients by spray drying", and "Characterization and analysis of spray dried powders", all chapters emphasize the engineering, optimization and control of spray dryers and the relevant processing equipment. Written by experts in the field of food engineering, in a simple and dynamic way, this book targets industrial engineers working in the field of food processing and within food factories to make them more familiar with drying unit operations. - Thoroughly explores novel applications of spray drying unit operations in food industries - Helps readers improve the formulation of food powders with natural ingredients - Promotes better control of spray drying with simulation and modeling tools
Download or read book Drying Science and Technology written by Suvanjan Bhattacharyya and published by BoD – Books on Demand. This book was released on 2024-02-28 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying Science and Technology provides a thorough and current investigation of the complex area of drying processes. This book is a collaborative effort that brings together prominent professionals to give a comprehensive grasp of drying science’s concepts, methodology, and applications. The book opens by underlining the importance of drying operations in a variety of sectors, including food preservation and materials processing. This opening portion provides the framework for a varied investigation that will appeal to a wide range of readers. The book covers fundamental ideas and digs into the heat and mass transport mechanisms that underpin drying processes. Readers are taken through the fundamentals that determine the efficiency and quality of drying processes, laying the groundwork for additional in-depth research. A large portion of the book is dedicated to a variety of drying processes and procedures, both traditional and cutting-edge. From basic convection drying to modern technologies such as freeze drying and microwave drying, each strategy is evaluated for its uses, benefits, and drawbacks. This broad cover guarantees that readers obtain a full understanding of the equipment available for various drying applications. The use of mathematical modeling provides a quantitative dimension to the book, with chapters focused on the development, evaluation, and application of models in drying science. This part is intended for scholars and practitioners who want a better knowledge of the quantitative features that underpin the discipline. The book highlights the dynamic nature of drying research and includes the most recent advances in drying technology. Innovations in equipment and approaches highlight the changing landscape of drying research, providing insights into cutting-edge discoveries that will impact the field’s future. With a balanced combination of theoretical insights and practical applications, Drying Science and Technology is an invaluable resource for students, researchers, and professionals working in the various fields of drying.
Download or read book Amorphous Solid Dispersions written by Navnit Shah and published by Springer. This book was released on 2014-11-21 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive guide on the theory and practice of amorphous solid dispersions (ASD) for handling challenges associated with poorly soluble drugs. In twenty-three inclusive chapters, the book examines thermodynamics and kinetics of the amorphous state and amorphous solid dispersions, ASD technologies, excipients for stabilizing amorphous solid dispersions such as polymers, and ASD manufacturing technologies, including spray drying, hot melt extrusion, fluid bed layering and solvent-controlled micro-precipitation technology (MBP). Each technology is illustrated by specific case studies. In addition, dedicated sections cover analytical tools and technologies for characterization of amorphous solid dispersions, the prediction of long-term stability, and the development of suitable dissolution methods and regulatory aspects. The book also highlights future technologies on the horizon, such as supercritical fluid processing, mesoporous silica, KinetiSol®, and the use of non-salt-forming organic acids and amino acids for the stabilization of amorphous systems. Amorphous Solid Dispersions: Theory and Practice is a valuable reference to pharmaceutical scientists interested in developing bioavailable and therapeutically effective formulations of poorly soluble molecules in order to advance these technologies and develop better medicines for the future.
