Download or read book Engineering and Mining Journal written by and published by . This book was released on 1889 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics.Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.

Download or read book Engineering and Mining Journal written by and published by . This book was released on 1905 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Canadian Mining and Metallurgical Bulletin written by and published by . This book was released on 1928 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lead Smelting and Refining written by Walter Renton Ingalls and published by . This book was released on 1906 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Electrical Journal written by and published by . This book was released on 1918 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extractive Metallurgy of Copper written by Anil Kumar Biswas and published by Oxford ; Toronto : Pergamon. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific American written by and published by . This book was released on 1884 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mining Journal Railway Commercial Gazette written by and published by . This book was released on 1907 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Copper Leaching Solvent Extraction and Electrowinning Technology written by Gerald V. Jergensen and published by SME. This book was released on 1999 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume recognizes the growing role of solvent extraction and electrowinning technology in the world copper business. This well-established, remarkable hydrometallurgical achievement fills an important role in our technical ability to extract copper in an efficient and cost-effective way. This proceedings documents the present status of the SX-EW business. It represents a substantial body of historical, scientific, engineering, and commercial information regarding the growth and application of the technology.

Download or read book Red Gold of Africa written by Eugenia W. Herbert and published by Univ of Wisconsin Press. This book was released on 1984 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic history of copper working and use throughout Africa. Researched with a depth of scholarship that will leave future historians green with envy.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book The Electrician written by and published by . This book was released on 1918 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Copper Alloys written by Luca Collini and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper has been used for thousands of years. In the centuries, both handicraft and industry have taken advantage of its easy castability and remarkable ductility combined with good mechanical and corrosion resistance. Although its mechanical properties are now well known, the simple f.c.c. structure still makes copper a model material for basic studies of deformation and damage mechanism in metals. On the other hand, its increasing use in many industrial sectors stimulates the development of high-performance and high-efficiency copper-based alloys. After an introduction to classification and casting, this book presents modern techniques and trends in processing copper alloys, such as the developing of lead-free alloys and the role of severe plastic deformation in improving its tensile and fatigue strength. Finally, in a specific section, archaeometallurgy techniques are applied to ancient copper alloys. The book is addressed to engineering professionals, manufacturers and materials scientists.

Download or read book Copper technology competitiveness written by and published by DIANE Publishing. This book was released on 1988 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.