Download or read book The Handbook of Tunnel Fire Safety written by Richard Carvel and published by Thomas Telford. This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like New, No Highlights,No Markup,all pages are intact.
Download or read book Handbook of Tunnel Fire Safety written by Alan N. Beard and published by ICE Publishing. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: the book focuses on the designing and running and building of tunnels with regards to their fire safety elements. This is an updated second edition of the book. The book is a specialist design title and is technical, not an overview of the topic but rather in depth. It has some managerial elements within it, in terms of what you will need to know in tunnel fire safety. Spanning the spectrum of current knowledge available in the field of tunnel fire safety, Handbook of Tunnel Fire Safety covers a diverse range of topics. This new edition includes new information on automatic incident detection (AID), fire suppression in tunnels, heat release rates in tunnel fires, new case studies, and all uptodate information on probabilistic modelling and tunnel fires, and tunnel fires and human behaviour. The book will appeal to all concerned with fire safety in tunnels including designers, operators, regulators, emergency services, equipment manufacturers and researchers.
Download or read book Tunnel Fire Dynamics written by Haukur Ingason and published by Springer. This book was released on 2014-11-14 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of issues in fire safety engineering in tunnels, describes the phenomena related to tunnel fire dynamics, presents state-of-the-art research, and gives detailed solutions to these major issues. Examples for calculations are provided. The aim is to significantly improve the understanding of fire safety engineering in tunnels. Chapters on fuel and ventilation control, combustion products, gas temperatures, heat fluxes, smoke stratification, visibility, tenability, design fire curves, heat release, fire suppression and detection, CFD modeling, and scaling techniques all equip readers to create their own fire safety plans for tunnels. This book should be purchased by any engineer or public official with responsibility for tunnels. It would also be of interest to many fire protection engineers as an application of evolving technical principles of fire safety.
Download or read book Tunnel Engineering Handbook written by Thomas R. Kuesel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.
Download or read book SFPE Handbook of Fire Protection Engineering written by Morgan J. Hurley and published by Springer. This book was released on 2015-10-07 with total page 3510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and significantly expanded, the fifth edition of this classic work offers both new and substantially updated information. As the definitive reference on fire protection engineering, this book provides thorough treatment of the current best practices in fire protection engineering and performance-based fire safety. Over 130 eminent fire engineers and researchers contributed chapters to the book, representing universities and professional organizations around the world. It remains the indispensible source for reliable coverage of fire safety engineering fundamentals, fire dynamics, hazard calculations, fire risk analysis, modeling and more. With seventeen new chapters and over 1,800 figures, the this new edition contains: Step-by-step equations that explain engineering calculations Comprehensive revision of the coverage of human behavior in fire, including several new chapters on egress system design, occupant evacuation scenarios, combustion toxicity and data for human behavior analysis Revised fundamental chapters for a stronger sense of context Added chapters on fire protection system selection and design, including selection of fire safety systems, system activation and controls and CO2 extinguishing systems Recent advances in fire resistance design Addition of new chapters on industrial fire protection, including vapor clouds, effects of thermal radiation on people, BLEVEs, dust explosions and gas and vapor explosions New chapters on fire load density, curtain walls, wildland fires and vehicle tunnels Essential reference appendices on conversion factors, thermophysical property data, fuel properties and combustion data, configuration factors and piping properties “Three-volume set; not available separately”
Download or read book Tunnel Fire Safety written by Cornelis Both and published by . This book was released on 2003 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tunnel Fire Dynamics written by Haukur Ingason and published by Springer Nature. This book was released on with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Advanced Technology in Fire Safety written by Masahiro Yamazaki and published by Ed. Universidad de Cantabria. This book was released on 2017-10-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings include papers presented at the International Conference on “Research and Advanced Technology in Fire Safety” FireSafety 2017 which took place at University of Cantabria, Santander, Spain. During last decade, our research group organized several on-day events and, in this sense, the success of this conference is a tribute for that continued effort to exchange knowledge on this discipline between experts from all parts of the world. This congress represents an excellent “agora” for researchers and engineers to present and discuss new and innovative approaches. In addition, this event is a unique opportunity for Spanish-speaker scientific and technological community to receive them from top references. The need for expertise in this field is also increasing in this geographical context.
Download or read book Tunnel Fire Safety written by Institution of fire engineers. Engineering Council Division and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Safety Management Handbook written by Daniel E. Della-Giustina and published by CRC Press. This book was released on 2014-02-07 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have guide for current and future safety professionals, the third edition of this practical handbook presents the key elements of an effective fire safety management program; explains the types and functions of fire control equipment; discusses the identification and control of hazardous materials; identifies safety organizations and available resources for fire service programs; describes commonly installed fire detection systems and their maintenance and inspection; and includes learning objectives, case studies, updated codes and standards, and information about emergency response and school fire safety planning.
Download or read book Tunnel Fire Testing and Modeling written by Fabio Borghetti and published by Springer. This book was released on 2016-11-25 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to cast light on all aspects of tunnel fires, based on experimental activities and theoretical and computational fluid dynamics (CFD) analyses. In particular, the authors describe a transient full-scale fire test (~15 MW), explaining how they designed and performed the experimental activity inside the Morgex North tunnel in Italy. The entire organization of the experiment is described, from preliminary evaluations to the solutions found for management of operational difficulties and safety issues. This fire test allowed the collection of different measurements (temperature, air velocity, smoke composition, pollutant species) useful for validating and improving CFD codes and for testing the real behavior of the tunnel and its safety systems during a diesel oil fire with a significant heat release rate. Finally, the fire dynamics are compared with empirical correlations, CFD simulations, and literature measurements obtained in other similar tunnel fire tests. This book will be of interest to all engineers and public officials who are concerned with the nature, prevention, and management of tunnel fires.
Download or read book Fire and Rescue Service operational guidance incidents in tunnels and underground structures written by Great Britain: Department for Communities and Local Government and published by The Stationery Office. This book was released on 2012-04-27 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents a framework for a safe system of work for operations at incidents involving tunnels and underground structures. It provides a robust yet flexible insight that can be adapted to the nature, scale and requirements of the incident. Incidents involving tunnels and underground structures may place significant demands on local fire and rescue services and have often required a national co-ordinated response from across the country. This type of incident may generate intense media attention where the operations of the emergency services are rigorously scrutinised. Whilst much of this attention is approving it will invariably focus on the preparedness of the emergency services and their operational effectiveness.
Download or read book Design Fires in Road Tunnels written by Igor Y. Maevski and published by Transportation Research Board. This book was released on 2011 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) 415: Design Fires in Road Tunnels information on the state of the practice of design fires in road tunnels, focusing on tunnel fire dynamics and the means of fire management for design guidance.
Download or read book Engineering Assets and Public Infrastructures in the Age of Digitalization written by Jayantha P. Liyanage and published by Springer Nature. This book was released on 2020-08-17 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings of the 13th World Congress on Engineering Asset Management covers a range of topics that are timely, relevant and practically important in the modern digital era towards safer, cost effective, efficient, and secure engineered assets such as production and manufacturing plants, process facilities, civil structures, equipment, machinery, and infrastructure. It has compiled some pioneering work by domain experts of the global Engineering Asset Management community representing both public and private sectors. The professional coverage of the book includes: Asset management in Industry 4.0; Standards and models; Sustainable assets and processes; Life cycle perspectives; Smart and safer assets; Applied data science; Workplace safety; Asset health; Advances in equipment condition monitoring; Critical asset processes; and Innovation strategy and entrepreneurship The breadth and depth of these state-of-the-art, comprehensive proceedings make them an excellent resource for asset management practitioners, researchers and academics, as well as undergraduate and postgraduate students.
Download or read book Quantitative Risk Assessment in Fire Safety written by Ganapathy Ramachandran and published by Routledge. This book was released on 2011-02-25 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety regulations in many countries require Fire Risk Assessment to be carried out for buildings such as workplaces and houses in multiple occupation. This duty is imposed on a "Responsible Person" and also on any other persons having control of buildings in compliance with the requirements specified in the regulations. Although regulations only require a qualitative assessment of fire risk, a quantitative assessment is an essential first step for performing cost-benefit analysis of alternative fire strategies to comply with the regulations and selecting the most cost-effective strategy. To facilitate this assessment, various qualitative, semi-quantitative and quantitative techniques of fire risk assessment, already developed, are critically reviewed in this book and some improvements are suggested. This book is intended to be an expanded version of Part 7: Probabilistic risk assessment, 2003, a Published Document (PD) to British Standard BS 7974: 2001 on the Application of Fire Safety Engineering Principles to the Design of Buildings. Ganapathy Ramachandran and David Charters were co-authors of PD 7974 Part 7. Quantitative Risk Assessment in Fire Safety is essential reading for consultants, academics, fire safety engineers, fire officers, building control officers and students in fire safety engineering. It also provides useful tools for fire protection economists and risk management professionals, including those involved in fire insurance underwriting.
Download or read book Leveraging Artificial Intelligence in Engineering Management and Safety of Infrastructure written by M.Z. Naser and published by CRC Press. This book was released on 2022-11-17 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design, construction, and upkeep of infrastructure is comprised of a multitude of dimensions spanning a highly complex paradigm of interconnected opportunities and challenges. While traditional methods fall short of adequately accounting for such complexity, artificial intelligence (AI) presents novel and out-of-the-box solutions that effectively tackle the growing demands of our infrastructure. The convergence between AI and civil engineering is an emerging frontier with tremendous potential. The book is likely to provide a boost to the state of infrastructure engineering by fostering a new look at civil engineering that capitalizes on AI as its main driver. It highlights the ongoing push to adopt and leverage AI to realize contemporary, intelligent, safe, and resilient infrastructure. The book comprises interdisciplinary and novel works from across the globe. It presents findings from innovative efforts supplemented with physical tests, numerical simulations, and case studies – all of which can be used as benchmarks to carry out future experiments and/or facilitate the development of future AI models in structural engineering, traffic engineering, construction engineering, and construction materials. The book will serve as a guide for a wide range of audiences, including senior undergraduate and graduate students, professionals, and government officials of civil, traffic, and computer engineering backgrounds, as well as for those engaged in urban planning and human sciences.
Download or read book Fluid Mechanics Aspects of Fire and Smoke Dynamics in Enclosures written by Bart Merci and published by CRC Press. This book was released on 2022-10-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: - written by world leading experts in the field - contains many worked-out examples, taken from daily life fire related practical problems - covers the entire range from basics up to state-of-the-art computer simulations of fire and smoke related fluid mechanics aspects, including the effect of water - provides extensive treatment of the interaction of water sprays with a fire-driven flow - contains a chapter on CFD (Computational Fluid Dynamics), the increasingly popular calculation method in the field of fire safety science
