Download or read book The Growth of Oxidation induced Stacking Faults During Thermal Oxidation of Silicon written by Ting-hsin Wei and published by . This book was released on 1983 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Oxidation on Impurity Diffusion and Stacking Fault Growth in Silicon written by Stanford University. Stanford Electronics Laboratories. Integrated Circuits Laboratory and published by . This book was released on 1982 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Proceedings of the Second Symposium on Defects in Silicon written by W. Murray Bullis and published by . This book was released on 1991 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oxidation induced Stacking Fault in 100 and 111 Silicon Wafers written by Mei Keat Liang and published by . This book was released on 2002 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Processing and Potential Applications of Porous Silicon written by and published by . This book was released on 1992 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of a cylindrical pore under the influence of surface energy is important for porous silicon (PS) processing in the integrated circuit industry. Once the zig-zag cylindrical pores of porous silicon or oxidized porous silicon (OPS) are unstable and breakup into rows of isolated spherical pores, oxidation of PS and densification/nitridation of OPS become difficult. Swing to difficulty transport of reactant gas (O2, NH3) or the trapped gas (for densification of OPS). A first order analysis of the stability of a cylindrical pore or cylinder is considered first. Growth of small sinusoidal perturbations by viscous flow or evaporation/condensation result in dependence of perturbation growth rate on perturbation wavelength. Rapid thermal oxidation (RTO) of porous silicon is proposed as an alternative for the tedious two-step 300 and 800C oxidation process. Transmission electron microscopy, energy dispersive spectroscopy ESCA are used for quality control. Also, rapid thermal nitridation of oxidized porous silicon in ammonia is proposed to enhance OPS resistance to HF solution. Pores breakup of OPS results in a trapped gas problem during densification. Wet helium is proposed as OPS densification ambient gas to shorten densification time. Finally, PS is proposed to be an extrinsic gettering center in silicon wafers. The suppression of oxidation-induced stacking faults is used to demonstrate the gettering ability. Possible mechanism is discussed.

Download or read book Fundamental Aspects of Ultrathin Dielectrics on Si based Devices written by Eric Garfunkel and published by Springer Science & Business Media. This book was released on 1998-03-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extrapolation of ULSI scaling trends indicates that minimum feature sizes below 0.1 mu and gate thicknesses of Audience: Both expert scientists and engineers who wish to keep up with cutting edge research, and new students who wish to learn more about the exciting basic research issues relevant to next-generation device technology.

Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures

Download or read book Proceedings of the Fourth International Symposium on High Purity Silicon written by Cor L. Claeys and published by The Electrochemical Society. This book was released on 1996 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Formation of Structural Imperfections in Semiconductor Silicon written by V. I. Talanin and published by Cambridge Scholars Publishing. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, it is difficult to imagine all spheres of human activity without personal computers, solid-state electronic devices, micro- and nanoelectronics, photoconverters, and mobile communication devices. The basic material of modern electronics and for all of these industries is semiconductor silicon. Its properties and applications are determined by defects in its crystal structure. However, until now, there has been no complete and reliable description of the creation and transformation of such a defective structure. This book solves this mystery through two different approaches to semiconductor silicon: the classical and the probabilistic. This book brings together, for the first time, all existing experimental and theoretical information on the internal structure of semiconductor silicon. It will appeal to a wide range of readers, from materials scientists and practical engineers to students.

Download or read book Concise Encyclopedia of Semiconducting Materials Related Technologies written by S. Mahajan and published by Elsevier. This book was released on 2013-10-22 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layers are discussed in the volume and coverage is included of defects and their effects on device behavior. Metallization and passivation issues are also covered. Over 100 alphabetically arranged articles, written by world experts in the field, are each intended to serve as the first source of information on a particular aspect of electronic materials. The volume is extensively illustrated with photographs, diagrams and tables. A bibliography is provided at the end of each article to guide the reader to recent literature. A comprehensive system of cross-references, a three-level subject index and an alphabetical list of articles are included to aid readers in the abstraction of information.

Download or read book Microelectronic Materials and Processes written by R.A. Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.

Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1994-11-21 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "

Download or read book Fundamentals of Semiconductor Processing Technology written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech nologies. This book is written with the need for a "bridge" between different disciplines in mind. It is intended to present to engineers and scientists those parts of modem processing technologies that are of greatest importance to the design and manufacture of semi conductor circuits. The material is presented with sufficient detail to understand and analyze interactions between processing and other semiconductor disciplines, such as design of devices and cir cuits, their electrical parameters, reliability, and yield.

Download or read book Intrinsic Point Defects Impurities and Their Diffusion in Silicon written by Peter Pichler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the first comprehensive review of intrinsic point defects, impurities and their complexes in silicon. Besides compiling the structures, energetic properties, identified electrical levels and spectroscopic signatures, and the diffusion behaviour from investigations, it gives a comprehensive introduction into the relevant fundamental concepts.

Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by Newnes. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry. The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.

Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2010-10-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text is now fully revised and updated, providing an overview of fabrication technologies and materials needed to realize modern microdevices. It demonstrates how common microfabrication principles can be applied in different applications, to create devices ranging from nanometer probe tips to meter scale solar cells, and a host of microelectronic, mechanical, optical and fluidic devices in between. Latest developments in wafer engineering, patterning, thin films, surface preparation and bonding are covered. This second edition includes: expanded sections on MEMS and microfluidics related fabrication issues new chapters on polymer and glass microprocessing, as well as serial processing techniques 200 completely new and 200 modified figures more coverage of imprinting techniques, process integration and economics of microfabrication 300 homework exercises including conceptual thinking assignments, order of magnitude estimates, standard calculations, and device design and process analysis problems solutions to homework problems on the complementary website, as well as PDF slides of the figures and tables within the book With clear sections separating basic principles from more advanced material, this is a valuable textbook for senior undergraduate and beginning graduate students wanting to understand the fundamentals of microfabrication. The book also serves as a handy desk reference for practicing electrical engineers, materials scientists, chemists and physicists alike. www.wiley.com/go/Franssila_Micro2e