Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Electrochemistry of Titanium Corrosion written by and published by . This book was released on 1905 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This Thesis describes investigations of the corrosion resistant behaviour of titanium and several of its dilute _-phase alloys in aqueous solutions under conditions (temperature, pH, solution composition, 'etc'.) expected to be relevant to titanium alloy containers buried in a nuclear fuel waste disposal vault. A range of electrochemical experiments (open circuit potential, polarization, electrochemical impedance spectroscopy, coupled electrode crevice corrosion and combined electrochemistry/neutron reflectometry measurements) and post-electrochemistry, 'ex situ' analyses (X-ray photoelectron spectroscopy, hydrogen extraction, optical microscopy, and Auger electron spectroscopy) were used to study the nature and growth of the passive oxide film on titanium, its breakdown and dissolution, the absorption of hydrogen into the titanium, and the influence of ilute alloying components on some of these behaviours. The major conclusions are mentioned briefly below. The data generated in these experiments support published papers that suggest the passive film on titanium is composed of TiO2 with a rutile-like packing density; however, when grown in aqueous solution, significant amounts of hydrogen are incorporated into the oxide in the form of Ti-OH and bound water molecules. On alloy materials containing Ti-noble metal intermetallic precipitates, the passive film seems to be discontinuous, presumably because it does not form as well over exposed intermetallic particles as it does over grains of titanium. This observation helps explain the enhanced corrosion resistance of these alloys over unalloyed titanium--the exposed particles are believed to catalyze the cathodic half-reaction and reinforce passivity by anodically polarizing the alloy. The passive oxide film on titanium can be penetrated by dissolution in acidic solution. This requires a pH less than ~1 in deaerated HCl solution at room temperature. It appears that catalysis of the hydrogen evolution reaction by exposed.

Download or read book The Electrochemistry of Titanium Corrosion written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Electrochemistry of Titanium Corrosion written by James J. Noël and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Certain Aspects of the Galvanic Corrosion Behavior of Titanium written by David Schlain and published by . This book was released on 1953 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.

Download or read book Electrochemical Corrosion Behaviors of Titanium and Titanium based Alloys written by Chotiros Kuphasuk and published by . This book was released on 1999 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium and Titanium Alloys written by and published by . This book was released on 1974 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Download or read book Electrochemical Corrosion Behavior of Commercially Pure Titanium Materials Fabricated by Different Methods in Three Electrolytes written by Jamila Dunigan Miller and published by . This book was released on 2004 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrochemistry of Stress Corrosion Cracking of Titanium Alloys in Chloride Environments written by Roberto Piccinini and published by . This book was released on 1972 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comparison of Electrochemical Corrosion Behavior Among Four Grades of Commercially Pure Titanium written by Walter Co Lim and published by . This book was released on 2001 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrochemical and Optical Techniques for the Study and Monitoring of Metallic Corrosion written by M.G.S Ferreira and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of considerable efforts over the years to understand and combat materials degradation via corrosion processes, many challenges still remain both in the theoretical understanding of the phenomena and in seeking pratical solutions to the perennial problem. Progress has been slow due to the complexity of the processes and the systems involved. Fortunately, in recent years there has been a renaissance in the development of new electrochemical and optical techniques, as well as advances in instrumentation, which have greatly aided our quest to gain insight into the complex mechanisms involved in metallic corrosion and passivation. Numerous scientific meetings, symposia, and workshops have been held allover the world which attest to the frenzy of activities in corrosion science and technology. However, most of these conferences have dealt mainly with recent research results. There appeared to be a need to assess and disseminate our present state of knowledge in the field as regards measurement techniques, theory, and instrumentation. The present NATO Advanced Study Institute was therefore held in Viana do Castelo, Portugal from July 9 to 21, 1989. The Institute consisted of a series of tutorial lectures, poster sessions, and round-table discussions interspersed evenly over the two-week period. It was attended by 75 participants from several countries representing industry, government and university laboratories.

Download or read book Plasma Electrolytic Oxidation PEO Coatings written by Marta Mohedano and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO), functionalizes surfaces, improving the mechanical, thermal, and corrosion performance of metallic substrates, along with other tailored properties (e.g., biocompatibility, catalysis, antibacterial response, self-lubrication, etc.). The extensive field of applications of this technique ranges from structural components, in particular, in the transport sector, to more advanced fields, such as bioengineering. The present Special Issue covers the latest advances in PEO‐coated light alloys for structural (Al, Mg) and biomedical applications (Ti, Mg), with 10 research papers and 1 review from leading research groups around the world.

Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.

Download or read book The Electrochemistry of Titanium in Acid Solutions and Its Relation to Stress Corrosion Cracking written by Roger Cletus May and published by . This book was released on 1971 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrochemistry for the Environment written by Christos Comninellis and published by Springer Science & Business Media. This book was released on 2009-10-15 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment technology is undergoing a profound transformation due to the fundamental changes in regulations governing the discharge and disposal of h- ardous pollutants. Established design procedures and criteria, which have served the industry well for decades, can no longer meet the ever-increasing demand. Toxicity reduction requirements dictate in the development of new technologies for the treatment of these toxic pollutants in a safe and cost-effective manner. Fo- most among these technologies are electrochemical processes. While electrochemical technologies have been known and utilized for the tre- ment of wastewater containing heavy metal cations, the application of these p- cesses is only just a beginning to be developed for the oxidation of recalcitrant organic pollutants. In fact, only recently the electrochemical oxidation process has been rec- nized as an advanced oxidation process (AOP). This is due to the development of boron-doped diamond (BDD) anodes on which the oxidation of organic pollutants is mediated via the formation of active hydroxyl radicals.